- Air Quality Station with adjustable alarms
- 2 alarm types
- Supply voltage: 230 V AC
- Input signal: 0 ... 10 V
- Sensor supply via evaluation device
- Degree of protection: IP66
- Incl. ISO calibration certificate

- Wind measuring device with adjustable alarms
- 2 alarm types
- Supply voltage: 24 V DC
- Input signal: 4 ... 20 mA
- Sensor supply via evaluation device
- Degree of protection: IP66
- Incl. ISO calibration certificate

PCE-WSAC 50 is an air velocity meter alarm controller that displays the current wind speed as well as the average wind speed of the last 2 and 5 minutes. This air velocity meter alarm controller allows measurement of the slightest of wind movements. PCE-WSAC 50 is used for a variety of wind monitoring applications in industries such as construction, mining, renewable energy and manufacturing.

- Pre-alarm and full alarm with visual and audible warnings
- Optional RS-485 modbus interface for data communication
- Measuring range: 0 ... 50 m/s or 0 ... 110 mph
- Incl. ISO calibration certificate

 

The Air Velocity Meter PCE-WSAC 50-110 can be used in different fields of application. In use, the air velocity meter carries out measurements from the smallest wind movements. The air velocity meter  can be used to monitor and alert on the current wind speed.

- Supply voltage: 230 V AC
- Input signal: 4 ... 20 mA
- 2 types of alarms
- Sensor supply via evaluation device
- Degree of protection: IP66
- Incl. ISO calibration certificate

The Air Velocity Meter PCE-WSAC 50-120 can be used in different fields of application. In use, the air velocity meter carries out measurements from the smallest wind movements. The air velocity meter  can be used to monitor and alert on the current wind speed.

- Wind measuring device with adjustable alarms
- 2 alarm types
- Supply voltage: 230 V AC
- Input signal: 0 ... 10 V
- Sensor supply via evaluation device
- Degree of protection: IP66
- Incl. ISO calibration certificate

The Air Velocity Meter PCE-WSAC 50-210 can be used in different fields of application. In use, the air velocity meter carries out measurements from the smallest wind movements. The air velocity meter  can be used to monitor and alert on the current wind speed.

- Wind measuring device with adjustable alarms
- 2 alarm types
- Supply voltage: 115 V AC
- Input signal: 4 ... 20 mA
- Sensor supply via evaluation device
- Degree of protection: IP66
- Incl. ISO calibration certificate

The Air Velocity Meter PCE-WSAC 50-220 can be used in different fields of application. In use, the air velocity meter carries out measurements from the smallest wind movements. The air velocity meter  can be used to monitor and alert on the current wind speed.

- Wind measuring device with adjustable alarms
- 2 alarm types
- Supply voltage: 115 V AC
- Input signal: 0 ... 10 V
- Sensor supply via evaluation device
- Degree of protection: IP66
- Incl. ISO calibration certificate

The Air Velocity Meter PCE-WSAC 50-310 can be used in different fields of application. In use, the air velocity meter carries out measurements from the smallest wind movements. The air velocity meter  can be used to monitor and alert on the current wind speed.

- Wind measuring device with adjustable alarms
- 2 alarm types
- Supply voltage: 24 V DC
- Input signal: 4 ... 20 mA
- Sensor supply via evaluation device
- Degree of protection: IP66
- Incl. ISO calibration certificate

The Air Velocity Meter PCE-WSAC 50-320 can be used in different fields of application. In use, the air velocity meter carries out measurements from the smallest wind movements. The air velocity meter  can be used to monitor and alert on the current wind speed.

- Wind measuring device with adjustable alarms
- 2 alarm types
- Supply voltage: 24 V DC
- Input signal: 0 ... 10 V
- Sensor supply via evaluation device
- Degree of protection: IP66
- Incl. ISO calibration certificate

The Anemometer PCE-WSAC 50-110 can be used in different fields of application. In use, the Anemometer carries out measurements from the smallest wind movements. The Anemometer  can be used to monitor and alert on the current wind speed.

- Supply voltage: 230 V AC
- Input signal: 4 ... 20 mA
- 2 types of alarms
- Sensor supply via evaluation device
- Degree of protection: IP66
- Incl. ISO calibration certificate

The Anemometer PCE-WSAC 50-120 can be used in different fields of application. In use, the Anemometer carries out measurements from the smallest wind movements. The Anemometer  can be used to monitor and alert on the current wind speed.

- Wind measuring device with adjustable alarms
- 2 alarm types
- Supply voltage: 230 V AC
- Input signal: 0 ... 10 V
- Sensor supply via evaluation device
- Degree of protection: IP66
- Incl. ISO calibration certificate

The Anemometer PCE-WSAC 50-210 can be used in different fields of application. In use, the Anemometer carries out measurements from the smallest wind movements. The Anemometer  can be used to monitor and alert on the current wind speed.

- Wind measuring device with adjustable alarms
- 2 alarm types
- Supply voltage: 115 V AC
- Input signal: 4 ... 20 mA
- Sensor supply via evaluation device
- Degree of protection: IP66
- Incl. ISO calibration certificate

The Anemometer PCE-WSAC 50-220 can be used in different fields of application. In use, the Anemometer carries out measurements from the smallest wind movements. The Anemometer  can be used to monitor and alert on the current wind speed.

- Wind measuring device with adjustable alarms
- 2 alarm types
- Supply voltage: 115 V AC
- Input signal: 0 ... 10 V
- Sensor supply via evaluation device
- Degree of protection: IP66
- Incl. ISO calibration certificate

The Anemometer PCE-WSAC 50-310 can be used in different fields of application. In use, the Anemometer carries out measurements from the smallest wind movements. The Anemometer  can be used to monitor and alert on the current wind speed.

- Wind measuring device with adjustable alarms
- 2 alarm types
- Supply voltage: 24 V DC
- Input signal: 4 ... 20 mA
- Sensor supply via evaluation device
- Degree of protection: IP66
- Incl. ISO calibration certificate

The Anemometer PCE-WSAC 50-320 can be used in different fields of application. In use, the Anemometer carries out measurements from the smallest wind movements. The Anemometer  can be used to monitor and alert on the current wind speed.

- Wind measuring device with adjustable alarms
- 2 alarm types
- Supply voltage: 24 V DC
- Input signal: 0 ... 10 V
- Sensor supply via evaluation device
- Degree of protection: IP66
- Incl. ISO calibration certificate

PCE-WSAC 50 is a climate meter alarm controller that displays the current wind speed as well as the average wind speed of the last 2 and 5 minutes. This climate meter alarm controller allows measurement of the slightest of wind movements. The climate meter alarm controller is used for a variety of wind monitoring applications in industries such as construction, mining, renewable energy and manufacturing.

- Pre-alarm and full alarm with visual and audible warnings
- Optional RS-485 modbus interface for data communication
- Measuring range: 0 ... 50 m/s or 0 ... 110 mph
- Incl. ISO calibration certificate

PCE-WSAC 50 is an environmental meter alarm controller that displays the current wind speed as well as the average wind speed of the last 2 and 5 minutes. This environmental meter alarm controller allows measurement of the slightest of wind movements. PCE-WSAC 50 is used for a variety of wind monitoring applications in industries such as construction, mining, renewable energy and manufacturing.

- Pre-alarm and full alarm with visual and audible warnings
- Optional RS-485 modbus interface for data communication
- Measuring range: 0 ... 50 m/s or 0 ... 110 mph
- Incl. ISO calibration certificate

 

The environmental meter is a simple portable pH meter for food, e.g. meat. The practical display makes the pH value on the environmental meter easy to read. A recalibration always guarantees optimum accuracy and is very easy to perform using the optionally available calibration kits.

- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Waterproof (IP 67)
- Data-Hold function
- Calibration: automatic, pH 4, 7, or 10
- Probe designed for Food, Meat etc.