CA-D36N D Series Clamp on Tester
for oscilloscopes / for AC currents from 100 mA to 3000 A / 30 Hz - 50 kHz bandwidth / enclosure - Ø 64 mm / no power supply needed
The CA-D36N D Series Clamp on Tester for oscilloscopes, from Chauvin Arnoux, with its excellent characteristics is very suitable for the measurement of high currents. The high quality, low phase shift, and the wide frequency range of the D Series Clamp on Tester ensures accurate measurements, even with power measurements. The Clamp on Tester has a high-quality iron core with evenly distributed windings, allowing for accurate AC current measurement even at currents up to 3000 A. Due to the rectangular shape, the D Series is particularly suitable for busbars and cables with a large cross section. In total there are 10 different models of the D Series current transformers for oscilloscopes. They differ mainly in measuring range, CT ratio, and output. When measuring with the D Series the range that can be selected is between the maximum values 1500 A and 3000 A. The conversion ratio must be configured on either alternating current or voltage. And finally, the different models of the D Series differ in their output. There is a variant socket, cable with safety plug, and cable with BNC connector. Thus the D Series is suitable for both oscilloscopes and multimeters.
The CA-D36N D Series Current Clamp for oscilloscopes has a high-quality iron core with evenly distributed windings. This allows accurate AC current measurement, even at currents up to 3000 A. Due to the rectangular shape, the Current Clamp is particularly suitable for busbars and cables with a large cross section. The Current Clamp adapter comes manufacturer calibrated with ISO calibration as an option.
- Measuring range: 1 A to 3000 A
- Transformer Ratio: 1 A / 1 mA
- Connection: 4 mm / 0.2 in socket
The counting scales PCE-SD 60C are low-cost robust verifiable system balances. The calibration of the scales is according to the trading class M III. The sturdy foundation is made of painted steel and features a plastic-coated steel platform.
- Weighing capacity: 60 kg
- Readability: 20g
- Minimum load: 400 g
- Platform size: 400 x 500 mm
- Certifiable: M III
The food pH meter PCE-228M offers fast and reliable pH and temperature measurement of all foods, e.g. sausage, meat and cheese. Temperature compensation is carried out manually or automatically via the supplied stainless steel temperature sensor.The pH value and the temperature can be read off the large LCD display, saved to the SD card, or transferred to a PC.
- Measuring range: 0.00...14.00 pH
- Resolution: 0.01 pH
- Accuracy: ± (0.02 pH + 2d)
- Memory: flexible via SD card memory 1...16 GB
- Interface: RS-232
- Suitable for food such as sausage, meat, cheese ...
PCE-PGM 60 is a portable handheld gloss meter or gloss tester used to evaluate the shine on different material surfaces. The gloss tester includes a 3.5" TFT touchscreen display, internal memory and PC-compatible software for detailed analysis.
- Measuring geometry: 60° degree angle
- Measuring range: 0 ... 300 GU
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Includes PC-compatible software for detailed analysis
- Light source: D65
- Wave length: 400-700 nm
The industrial scale PCE-SD 60C is a low-cost robust verifiable system balance. The calibration of the industrial scale is according to the trading class M III. The sturdy foundation of the industrial scale is made of painted steel and features a plastic-coated steel platform.
- Weighing capacity: 60 kg
- Readability: 20 g
- Minimum load: 400 g
- Platform size: 400 x 500 mm
- Certifiable: M III
The industrial scales PCE-SD 60C are low-cost robust verifiable system balances. The calibration of the industrial scales is according to the trading class M III. The sturdy foundation of the industrial scales is made of painted steel and features a plastic-coated steel platform.
- Weighing capacity: 60 kg
- Readability: 20 g
- Minimum load: 400 g
- Platform size: 400 x 500 mm
- Certifiable: M III
The inventory scale PCE-SD 60C is a low-cost robust verifiable system balance. The calibration of the platform scale is according to the trading class M III. The sturdy foundation of the inventory scale is made of painted steel and features a plastic-coated steel platform.
- Weighing capacity: 60 kg
- Readability: 20 g
- Minimum load: 400 g
- Platform size: 400 x 500 mm
- Certifiable: M III
PCE-PGM 60 is a portable handheld NDT tester or gloss tester used to evaluate the shine on different material surfaces. The gloss tester includes a 3.5" TFT touchscreen display, internal memory and PC-compatible software for detailed analysis.
- Measuring geometry: 60° degree angle
- Measuring range: 0 ... 300 GU
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Includes PC-compatible software for detailed analysis
- Light source: D65
- Wave length: 400-700 nm
The parcel scale PCE-SD 60C is a low-cost robust verifiable system balance. The calibration of the platform scale is according to the trading class M III. The sturdy foundation of the parcel scale is made of painted steel and features a plastic-coated steel platform.
- Weighing capacity: 60 kg
- Readability: 20 g
- Minimum load: 400 g
- Platform size: 400 x 500 mm
- Certifiable: M III
The platform scale PCE-SD 60C is a low-cost robust verifiable system balance. The calibration of the platform scale is according to the trading class M III. The sturdy foundation of the platform scale is made of painted steel and features a plastic-coated steel platform.
- Weighing capacity: 60 kg
- Readability: 20 g
- Minimum load: 400 g
- Platform size: 400 x 500 mm
- Certifiable: M III
