Order no.: FMW-B

The Concrete Moisture Meter FMW-B determines moisture content by means of the capacitive method. In the Concrete Moisture Meter an electromagnetic field quickly determines capacitance of wood.


- Measurement range: 2 ... 30 % H2O wood / 0 ... 60 % building
   materials

- Resolution: 0.1 %
- Accuracy: ±0.5 % of the reference material
- Memory: 50 measurement values
- Lower frontal sensor
- Non-destructive measurement

Manufacturer: Brookhuis Applied Technologies B.V.
Test Instruments manufacturer
Order no.: PCE-HVAC 4

The differential pressure meter PCE-HVAC 4 is a versatile measuring instrument for the determination of differential pressure, differential temperature and ambient temperature. The measurements of the differential pressure meter PCE-HVAC 4 are via measuring terminals, thermocouples and an internally installed NTC sensor.

- Various parameters: psi, kPa, inHg, amHg, bar, °C, °F
- Measuring range: -96.5 to 3447.5 kPa / -14 to 500 psi / -0.97 to 34.48 bar
- Pressure Resolution: 689.5 Pa / 0.1 psi / 0.0069 bar
- Temperature Measuring range: -60 ... 537°C / -70 ... 998°F
- Built-in ambient temperature sensor
- Battery warning indicator
- Overload indicator

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-WMM 50

PCE-WMM 50 is a wall-mounted gas detector that uses diffusion to monitor carbon dioxide (CO2) gas levels and ambient temperature (ºC / ºF) indoors. This indoor air quality meter features an alarm-activated potential-free contact that can, for example, activate a fan to reduce CO2 gas concentration in the room.


- CO2 gas measurement range: 0 ... 50,000 ppm
- Temperature measurement range: 0 ... +45 ºC / +32 ... +113 ºF
- IP54-rated enclosure on sensor and remote display units
- 2 adjustable alarm thresholds
- 3- to 4-digit remote display (depends on range)

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-WMM 50
The Gas test instrument PCE-WMM 50 is an inexpensive alarm instrument to detect carbon dioxide (CO2). The gas detector protects against the health hazards of the colorless and odourless gas that is used in the food industry, the metal industry and in chemical processes in waste management. The gas detector PCE-WMM 50 is divided into two parts: The detector is placed in the danger area, the reporting unit outside that area. This kind of test instruments helps to save lives.

- Detection of carbon dioxide (CO2) 
- 2 adjustable alarm thresholds 
- 4-digit display 
- Easy mounting on wall
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PWM 10
The HVAC measuring device is suitable for testing and setting high-efficiency pumps (HE pumps). The HVAC measuring device can be used both as a transmitter and as a receiver of PWM signals. The HVAC measuring device is able to check the pump controller in addition to the HE pump.

- PWM frequency: 40 ... 2000 Hz
- Measuring range: 0 ... 15 V
- PWM simulation
- Measurement and simulation 
- Testing of HE pumps
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HVAC 4

The HVAC meter PCE-HVAC 4 is a versatile measuring instrument for the determination of differential pressure, differential temperature and ambient temperature. The measurements of the HVAC meter PCE-HVAC 4 are via measuring terminals, thermocouples and an internally installed NTC sensor.

- Various parameters: psi, kPa, inHg, amHg, bar, °C, °F
- Measuring range: -96.5 to 3447.5 kPa / -14 to 500 psi / -0.97 to 34.48 bar
- Pressure Resolution: 689.5 Pa / 0.1 psi / 0.0069 bar
- Temperature Measuring range: -60 ... 537°C / -70 ... 998°F
- Built-in ambient temperature sensor-
- Battery warning indicator
- Overload indicator

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HVAC 4

The manometer PCE-HVAC 4 is a versatile measuring instrument for the determination of differential pressure, differential temperature and ambient temperature. The measurements of the manometer PCE-HVAC 4 are via measuring terminals, thermocouples and an internally installed NTC sensor.

- Various parameters: psi, kPa, inHg, amHg, bar, °C, °F
- Measuring range: -96.5 to 3447.5 kPa / -14 to 500 psi / -0.97 to 34.48 bar
- Pressure Resolution: 689.5 Pa / 0.1 psi / 0.0069 bar
- Temperature Measuring range: -60 ... 537°C / -70 ... 998°F
- Built-in ambient temperature sensor
- Battery warning indicator
- Overload indicator

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: FMW-B

The Moisture Analyzer FMW-B determines moisture content by means of the capacitive method. With the Moisture Analyzer an electromagnetic field quickly determines capacitance of wood. This moisture analyzer is very easy to use as well as very robust.


- Measurement range: 2 ... 30 % H2O wood / 0 ... 60 % building materials
- Resolution: 0.1 %
- Accuracy: ±0.5 % of the reference material
- Memory: 50 measurement values
- Lower frontal sensor
- Non-destructive measurement

Manufacturer: Brookhuis Applied Technologies B.V.
Test Instruments manufacturer
Order no.: FMW-B

The Moisture Meter FMW-B determines moisture content by means of the capacitive method. With the Moisture Meter an electromagnetic field quickly determines capacitance of wood. This moisture meter is very easy to use as well as very robust.


- Measurement range: 2 ... 30% H2O wood / 0 ... 60% building materials
- Resolution: 0.1%
- Accuracy: ±0.5% of the reference material
- Memory: 50 measurement values
- Lower frontal sensor
- Non-destructive measurement

Manufacturer: Brookhuis Applied Technologies B.V.
Test Instruments manufacturer
Order no.: FMW-B

The Moisture Tester for Wood FMW-B determines moisture content by means of the capacitive method. With the Moisture Tester for Wood an electromagnetic field quickly determines capacitance of wood.


- Measurement range: 2 ... 30% H2O wood / 0 ... 60% building materials
- Resolution: 0.1%
- Accuracy: ±0.5% of the reference material
- Memory: 50 measurement values
- Lower frontal sensor
- Non-destructive measurement

 

Manufacturer: Brookhuis Applied Technologies B.V.
Test Instruments manufacturer
Order no.: PCE-HVAC 4

The pressure gauge PCE-HVAC 4 is a versatile measuring instrument for the determination of differential pressure, differential temperature and ambient temperature. The measurements of the pressure gauge PCE-HVAC 4 are via measuring terminals, thermocouples and an internally installed NTC sensor.

- Various parameters: psi, kPa, inHg, amHg, bar, °C, °F
- Measuring range: -96.5 to 3447.5 kPa / -14 to 500 psi / -0.97 to 34.48 bar
- Pressure Resolution: 689.5 Pa / 0.1 psi / 0.0069 bar
- Temperature Measuring range: -60 ... 537°C / -70 ... 998°F
- Built-in ambient temperature sensor
- Battery warning indicator
- Overload indicator

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HVAC 4

The pressure meter PCE-HVAC 4 is a versatile measuring instrument for the determination of differential pressure, differential temperature and ambient temperature. The measurements of the pressure meter PCE-HVAC 4 are via measuring terminals, thermocouples and an internally installed NTC sensor.

- Various parameters: psi, kPa, inHg, amHg, bar, °C, °F
- Measuring range: -96.5 to 3447.5 kPa / -14 to 500 psi / -0.97 to 34.48 bar
- Pressure Resolution: 689.5 Pa / 0.1 psi / 0.0069 bar
- Temperature Measuring range: -60 ... 537°C / -70 ... 998°F
- Built-in ambient temperature sensor-
- Battery warning indicator
- Overload indicator

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PWM 10
The pump calibrator is suitable for testing and setting high-efficiency pumps (HE pumps). The pump calibrator can be used both as a transmitter and as a receiver of PWM signals. The pump calibrator is able to check the pump controller in addition to the HE pump.

- PWM frequency: 40 ... 2000 Hz
- Measuring range: 0 ... 15 V
- PWM simulation
- Measurement and simulation 
- Testing of HE pumps
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: FMW-B

The Timber Moisture Meter FMW-B determines moisture content by means of the capacitive method. In the Timber Moisture Meter an electromagnetic field quickly determines capacitance of wood.


- Measurement range: 2 ... 30 % H2O wood / 0 ... 60 % building materials
- Resolution: 0.1 %
- Accuracy: ±0.5 % of the reference material
- Memory: 50 measurement values
- Lower frontal sensor
- Non-destructive measurement

Manufacturer: Brookhuis Applied Technologies B.V.
Test Instruments manufacturer
Order no.: FMW-B

The Wood Moisture Meter FMW-B determines moisture content by means of the capacitive method. In the Wood Moisture Meter an electromagnetic field quickly determines capacitance of wood.


- Measurement range: 2 ... 30 % H2O wood / 0 ... 60 % building materials
- Resolution: 0.1 %
- Accuracy: ±0.5 % of the reference material
- Memory: 50 measurement values
- Lower frontal sensor
- Non-destructive measurement

Manufacturer: Brookhuis Applied Technologies B.V.
Test Instruments manufacturer
Order no.: PCE-NA6

The digial universal indicator PCE-NA6 series is equipped with two freely programmable 55-digit bar graph displays. In addition, the digital indicator comes with two conventional displays that show the active measuring values as figures. This allows the digital universal indicator to display two different measuring values at the same time, making the device particularly useful for climate control applications.


- Dual 55-digit bar graph displays
- Dual conventional (4-digit, 7-segment) displays
- Optional analogue output and RS485 interface
- Four alarm relays

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-AQD 10-ICA
The CO2 data logger PCE-AQD 10-ICA is used to measure air quality. The CO2 data logger measures carbon dioxide, temperature and humidity. The CO2 sensor from the CO2 data logger is disconnected from the main unit with a connection cable.

- Measuring range: 0 ... 4000 ppm
- Measuring range: 10 ... 90% rh
- Measuring range: 0 ... 50°C / 32 ... 122°F
- Memory on SD card
- 3 parameters of air quality
- CO2, air temperature and humidity
- incl. ISO Calibration Certificate (only for CO2)
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VA 20-ICA

The PCE-VA 20 is a versatile multifunction air flow meter for determining environmental conditions such as wind, temperature and humidity. It is additionally used to test heating, ventilation and air conditioning / cooling (HVAC) systems. This triple thermometer-hygrometer-anemometer device has a 10 cm / 3.9" Ø fan impeller and a clear backlit LCD. Available functions include display hold, average / maximum / minimum value, auto shutdown, low-battery warning, and metric / imperial choice.


- Measures air flow velocity, volume flow, relative humidity, air temperature, dew
  point temperature and wet-bulb temperature
- Air flow velocity range: 0.2 ... 30 m/s (39.4 ... 5905.5 fpm)
- Accuracy: ±(1.5% of measured value + 0.3 m/s) when less than 20 m/s, ±
  (3% of measured value + 0.3 m/s) when more than 20 m/s
- Resolution: 0.1
- Incl. ISO Calibration Certificate 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VA 20-ICA

The PCE-VA 20 is a versatile multifunction air flow meter for determining environmental conditions such as wind, temperature and humidity. It is additionally used to test heating, ventilation and air conditioning / cooling (HVAC) systems. This triple thermometer-hygrometer-anemometer device has a 10 cm / 3.9" Ø fan impeller and a clear backlit LCD. Available functions include display hold, average / maximum / minimum value, auto shutdown, low-battery warning, and metric / imperial choice.


- Measures air flow velocity, volume flow, relative humidity, air temperature, dew
  point temperature and wet-bulb temperature
- Air flow velocity range: 0.2 ... 30 m/s (39.4 ... 5905.5 fpm)
- Accuracy: ±(1.5% of measured value + 0.3 m/s) when less than 20 m/s, ±
  (3% of measured value + 0.3 m/s) when more than 20 m/s
- Resolution: 0.1
- Incl. ISO Calibration Certificate 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VA 20-ICA

The PCE-VA 20 is a versatile multifunction air velocity meter for determining environmental conditions such as wind, temperature and humidity. It is additionally used to test heating, ventilation and air conditioning / cooling (HVAC) systems. This triple thermometer-hygrometer-anemometer device has a 10 cm / 3.9" Ø fan impeller and a clear backlit LCD. Available functions include display hold, average / maximum / minimum value, auto shutdown, low-battery warning, and metric / imperial choice.


- Measures air flow velocity, volume flow, relative humidity, air temperature, dew
  point temperature and wet-bulb temperature
- Air flow velocity range: 0.2 ... 30 m/s (39.4 ... 5905.5 fpm)
- Accuracy: ±(1.5% of measured value + 0.3 m/s) when less than 20 m/s, ±
  (3% of measured value + 0.3 m/s) when more than 20 m/s
- Resolution: 0.1
- Incl. ISO Calibration Certificate 

Manufacturer: PCE Instruments
Test Instruments manufacturer