Industrial Measurement Products and Solutions
Order no.: PCE-T 260-ICA
The combination PCE-T 260 is a measuring instrument for use in maintenance, and production. In addition to the stroboscope function, the automotive tester also has the option of removing the rotational contacts and measuring temperatures.  

- Optical tachometer
- Measuring range: 5 ... 99999 rpm
- Contact tachometer
- Stroboscope LED
- Temperature measurement: Type K, PT 1000, Infrared
- LED Flash frequency: 100 ... 99990 FPM
- Temperature measurement: Type K, PT 1000
- Infrared
- Incl. ISO calibration certificate (only for the tachometer function)
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-T 260-ICA
The combination PCE-T 260 is a measuring instrument for use in maintenance, and production. In addition to the stroboscope function, the condition monitoring tachometer-stroboscope also has the option of removing the rotational contacts and measuring temperatures.  

- Optical tachometer
- Measuring range: 5 ... 99999 rpm
- Contact tachometer
- Stroboscope LED
- Temperature measurement: Type K, PT 1000, Infrared
- LED Flash frequency: 100 ... 99990 FPM
- Temperature measurement: Type K, PT 1000
- Infrared
- Incl. ISO calibration certificate (only for the tachometer function)
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-GM 60Plus-ICA

The PCE-GM 60Plus gloss meter is a portable handheld 60 degree gloss meter. This coating and paint gloss meter measures the gloss units (GU) on a material's surface. The rechargeable gloss meter or gloss tester uses reflected light for gloss measurement per ISO 2813, GB/T 9754, ASTM D523 and ASTM D2457 standards.


- Measuring geometry: 60° degree angle
- Measuring range: 0 ... 200 GU
- Measuring accuracy ±1.5 GU
- 3.5" TFT touchscreen display
- Light source: D65
- Wave length: 400-700 nm
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-T 260-ICA
The combination PCE-T 260 is a measuring instrument for use in maintenance, and production. In addition to the stroboscope function, the handheld tachometer also has the option of removing the rotational contacts and measuring temperatures. 

- Optical tachometer
- Measuring range: 5 ... 99999 rpm
- Contact tachometer
- Stroboscope LED
- Temperature measurement: Type K, PT 1000, Infrared
- LED Flash frequency: 100 ... 99990 FPM
- Temperature measurement: Type K, PT 1000
- Infrared
- Incl. ISO calibration certificate (only for the tachometer function)
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-GM 60Plus-ICA

The PCE-GM 60Plus NDT tester or gloss meter is a portable handheld 60 degree gloss meter. This coating and paint gloss meter measures the gloss units (GU) on a material's surface. The rechargeable gloss meter or gloss tester uses reflected light for gloss measurement per ISO 2813, GB/T 9754, ASTM D523 and ASTM D2457 standards.


- Measuring geometry: 60° degree angle
- Measuring range: 0 ... 200 GU
- Measuring accuracy ±1.5 GU
- 3.5" TFT touchscreen display
- Light source: D65
- Wave length: 400-700 nm
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-T 260-ICA
The combination PCE-T 260 is a measuring instrument for use in maintenance, and production. In addition to the stroboscope function, the tachometer-stroboscope also has the option of removing the rotational contacts and measuring temperatures. 
 
- Optical tachometer
- Measuring range: 5 ... 99999 rpm
- Contact tachometer
- Stroboscope LED
- Temperature measurement: Type K, PT 1000, Infrared
- LED Flash frequency: 100 ... 99990 FPM
- Temperature measurement: Type K, PT 1000
- Infrared
- Incl. ISO calibration certificate (only for the tachometer function)
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-GM 60Plus-ICA

PCE-GM 60Plus is a portable handheld 60-degree reflective surface-testing gloss meter or gloss tester used to measure the gloss units (GU) on a material's surface. This rechargeable surface-testing gloss meter uses reflected light for gloss measurement per ISO 2813, GB/T 9754, ASTM D523 and ASTM D2457 standards.


- Measuring geometry: 60° degree angle
- Measuring range: 0 ... 200 GU
- Measuring accuracy ±1.5 GU
- 3.5" TFT touchscreen display
- Light source: D65
- Wave length: 400-700 nm
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-T 260-ICA
The combination PCE-T 260 is a measuring instrument for use in maintenance, and production. In addition to the stroboscope function, the tachometer-stroboscope also has the option of removing the rotational contacts and measuring temperatures. 

- Optical tachometer
- Measuring range: 5 ... 99999 rpm
- Contact tachometer
- Stroboscope LED
- Temperature measurement: Type K, PT 1000, Infrared
- LED Flash frequency: 100 ... 99990 FPM
- Temperature measurement: Type K, PT 1000
- Infrared
- Incl. ISO calibration certificate (only for the tachometer function)
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RS 40

Rigid Inspection Camera for visual inspection in small and narrow holes and cavities. With a diameter of 4 mm and a length of 175 or 432 mm / 6.9 or 17 in this rigid Inspection Camera is very versatile. The integrated LED lamp allows for a very good illumination of cavities to be inspected.


- Diameter only 4 mm / 0.16 in
- Useful length 175 or 432 mm / 6.9 or 17 in
- LED lighting
- Battery operation

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RS 40

A rigid industrial borescope for visual inspection in small and narrow holes and cavities for example in aviation industry. With a diameter of only 4 mm and a length of 175 or 432 mm / 6.9 or 17 in this rigid industrial borescope is very versatile. The integrated LED lamp allows for a very good illumination of cavities to be inspected. The robust and compact design of this type of industrial borescope is very good for use in routine inspections in various industries as in the automotive industry.


- Diameter only 4 mm / 0.16 in
- Useful length 175 or 432 mm / 6.9 or 17 in
- LED lighting
- Battery operation

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VS12

PCE-VS12 is a vibration meter, analyzer or sensor condition monitoring switch used to measure RMS value, peak value and frequency domain (FFT) of vibration velocity or acceleration piezoelectrically. This IP67-rated vibration monitoring switch features an external USB port, 8-pin female connector 711 and programmable high pass and low pass filters.


- Frequency range (max.): 0.1 Hz ...10 kHz
- Measuring range: Acceleration = 0.1 ... 1000 m/s², Speed = Frequency-dependent
- Connections: Screw terminals for power supply (5 ... 30V DC) and Micro USB (internal)
- Mounting: M8 stud bolt

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VS12

PCE-VS12 is a vibration meter, analyzer or sensor condition monitoring switch used to measure RMS value, peak value and frequency domain (FFT) of vibration velocity or acceleration piezoelectrically. This IP67-rated vibration monitoring switch features an external USB port, 8-pin female connector 711 and programmable high pass and low pass filters.


- Frequency range (max.): 0.1 Hz ...10 kHz
- Measuring range: Acceleration = 0.1 ... 1000 m/s², Speed = Frequency-dependent
- Connections: Screw terminals for power supply (5 ... 30V DC) and Micro USB (internal)
- Mounting: M8 stud bolt

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VS12

PCE-VS12 is a vibration meter, analyzer or sensor condition monitoring switch used to measure RMS value, peak value and frequency domain (FFT) of vibration velocity or acceleration piezoelectrically. This IP67-rated vibration monitoring switch features an external USB port, 8-pin female connector 711 and programmable high pass and low pass filters.


- Frequency range (max.): 0.1 Hz ...10 kHz
- Measuring range: Acceleration = 0.1 ... 1000 m/s², Speed = Frequency-dependent
- Connections: Screw terminals for power supply (5 ... 30V DC) and Micro USB (internal)
- Mounting: M8 stud bolt

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VS12

PCE-VS12 is a vibration meter, analyzer or sensor condition monitoring switch used to measure RMS value, peak value and frequency domain (FFT) of vibration velocity or acceleration piezoelectrically. This IP67-rated vibration monitoring switch features an external USB port, 8-pin female connector 711 and programmable high pass and low pass filters.


- Frequency range (max.): 0.1 Hz ...10 kHz
- Measuring range: Acceleration = 0.1 ... 1000 m/s², Speed = Frequency-dependent
- Connections: Screw terminals for power supply (5 ... 30V DC) and Micro USB (internal)
- Mounting: M8 stud bolt

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-WMH-3

PCE-WMH-3 is a portable handheld digital absolute moisture meter or analyzer used to measure the moisture content of wood. This hammer-style wood moisture analyzer features preset characteristic curves for measuring moisture in 270 different wood types.


- Measuring range: 6 ... 60 % moisture content
- Accuracy: ±1 % (within 6 ... 12 % range), ±2 % (13 ... 28 %), ±2 % (29 ... 60 %)
- Resolution: 0.1 %

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: CWG 1

Compact air flow meter CWG1 for weather monitoring. Basic cup anemometer with 4 … 20 mA output.


- Output: 4 … 20 mA
- Measurement reading range: 0 … 50 m/s
- Accuracy: ± 0,5 m/s or 3 % v.M

Manufacturer: Adolf Thies GmbH & Co. KG
Test Instruments manufacturer
Order no.: PCE-HT 120-ICA
The air humidity meter PCE-HT 120 is used to measure temperature and humidity. The measurement data from the air humidity meter are displayed in an app on the tablet or smartphone and the display.

Measuring function
- Humidity
- Temperature
- Dew point
- Wet bulb temperature
- Ethernet: WLAN / WIFI
- Accespoint and client mode
- Connection for external PT1000 sensor
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MPC 10

PCE-MPC 10 is a portable handheld particle counter used to monitor particulate matter (PM) concentrations in the air. Designed to aid in indoor air quality (IAQ) assessments, this particle counter also measures air temperature and relative humidity (RH).


- PM channels: PM 2.5, PM 10
- Particle sizes (in micrometers): 2.5 µm, 10 µm
- Temp. measuring range: 0 ... +50 °C / +32 ... +122 °F
- Humidity measuring range: 0 ... 100 % RH
- 2" full-color LCD with user-friendly graphics
- Integrated data logger with adjustable sampling time
- Internal memory stores up to 5000 date-and-time-stamped data sets

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MPC 10

PCE-MPC 10 is a portable handheld air quality particle counting meter or particle counter used to monitor particulate matter (PM) concentrations in the air. Designed to aid in indoor air quality (IAQ) assessments, this particle counter also measures air temperature and relative humidity (RH).


- PM channels: PM 2.5, PM 10
- Particle sizes (in micrometers): 2.5 µm, 10 µm
- Temp. measuring range: 0 ... +50 °C / +32 ... +122 °F
- Humidity measuring range: 0 ... 100 % RH
- 2" full-color LCD with user-friendly graphics
- Integrated data logger with adjustable sampling time
- Internal memory stores up to 5000 date-and-time-stamped data sets

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MPC 10

PCE-MPC 10 is a portable handheld air sampler or particle counter used to monitor particulate matter (PM) concentrations in the air. Designed to aid in indoor air quality (IAQ) assessments, this particle counter also measures air temperature and relative humidity (RH).


- PM channels: PM 2.5, PM 10
- Particle sizes (in micrometers): 2.5 µm, 10 µm
- Temp. measuring range: 0 ... +50 °C / +32 ... +122 °F
- Humidity measuring range: 0 ... 100 % RH
- 2" full-color LCD with user-friendly graphics
- Integrated data logger with adjustable sampling time
- Internal memory stores up to 5000 date-and-time-stamped data sets

Manufacturer: PCE Instruments
Test Instruments manufacturer