Industrial Measurement Products and Solutions
Order no.: PCE-WSAC 50

PCE-WSAC 50 is an air flow meter alarm controller that displays the current wind speed as well as the average wind speed of the last 2 and 5 minutes. This air flow meter alarm controller allows measurement of the slightest of wind movements. PCE-WSAC 50 is used for a variety of wind monitoring applications in industries such as construction, mining, renewable energy and manufacturing.


- Pre-alarm and full alarm with visual and audible warnings
- Optional RS-485 modbus interface for data communication
- Measuring range: 0 ... 50 m/s or 0 ... 110 mph
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-WSAC 50

PCE-WSAC 50 is an air velocity meter alarm controller that displays the current wind speed as well as the average wind speed of the last 2 and 5 minutes. This air velocity meter alarm controller allows measurement of the slightest of wind movements. PCE-WSAC 50 is used for a variety of wind monitoring applications in industries such as construction, mining, renewable energy and manufacturing.


- Pre-alarm and full alarm with visual and audible warnings
- Optional RS-485 modbus interface for data communication
- Measuring range: 0 ... 50 m/s or 0 ... 110 mph
- Incl. ISO calibration certificate

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-WSAC 50-710

PCE-WSAC 50-710 is an anemometer that displays the current wind speed as well as the average wind speed of the last 2 and 5 minutes. This anemometer allows measurement of the slightest of wind movements. PCE-WSAC 50-710 is used for a variety of wind monitoring applications in industries such as construction, mining, renewable energy and manufacturing.


- Pre-alarm and full alarm with visual and audible warnings
- Measuring range: 0 ... 110 mph
- Power supply: 230 V AC
- Signal input: 4...20 mA

- incl. ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-WSAC 50-720

The PCE-WSAC 50-720 is a handy anemometer for showing the actual wind speed and the average wind speed of the prior 120 and 300 seconds. The measuring of minimal wind motion can be easily achieved by this accurate device. There are many outdoor areas of industry, e.g. excavation, wind farms, forestry, in which the PCE-WSAC 50-720 anemometer can be usefully deployed.


- Pre-alarm and full alarm with visual and audible warnings
- Measuring range: 0 ... 110 mph
- Power supply: 230 V AC
- Signal input: 0...10 V

- incl. ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-WSAC 50-810

The PCE-WSAC 50-810 anemometer allows measurement of wind movements from 0 mph to 110 mph. This convenient anemometer is used to measure the current wind speed and also the average speed over 2 minutes and over 5 minutes. Many outdoor industries, for example farming and acquaculture, are in need of the wind monitoring functions of the PCE-WSAC 500-810.


- Pre-alarm and full alarm with visual and audible warnings
- Measuring range: 0 ... 110 mph
- Power supply: 115 V AC
- Signal input: 4...20 mA

- incl. ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-WSAC 50-820

Both the present wind speed and the average wind speed of the preceding two and five minutes are shown on the PCE-WSAC 500-820 anemometer. The large measurement range of the device is 0 to 110 mph. The PCE-WSAC 500-820 anemometer is suitable for use across a whole range of industry sectors, including shipbuilding, petroleum and defence.


- Pre-alarm and full alarm with visual and audible warnings
- Measuring range: 0 ... 110 mph
- Power supply: 115 V AC
- Signal input: 0...10 V

- incl. ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-WSAC 50-910

A strong wind is not esssential to use the PCE-WSAC 50-910 anemometer, as it has a measuring range of 0 to 110 mph. In addition to the actual wind speed, this versatile anemometer can display the average wind speed over the last two minutes and five minutes. The PCE-WSAC 50-910 is suitable for numerous wind detection applications in outdoor industries, e.g on construction sites.


- Pre-alarm and full alarm with visual and audible warnings
- Measuring range: 0 ... 110 mph
- Power supply: 24 V DC
- Signal input: 4...20 mA

- incl. ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-WSAC 50-920

The PCE-WSAC 50-920 anemometer shows the speed of the wind and also the average figure over the prior two minutes and five minutes. The smallest wind motion is detected by this accurate anemometer. The timber industry, the mining industry, and the construction industry are some examples of applicable wind monitoring application areas for the PCE-WSAC 50-920.


- Pre-alarm and full alarm with visual and audible warnings
- Measuring range: 0 ... 110 mph
- Power supply: 24 V DC
- Signal input: 0...10 V

- incl. ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-EP 1500

Checkweighing Scale  with 3 ranges, weight range up to 1,500 kg.


- Three ranges for high accuracy
- Accuracy ±0.05 % of current value
- Large removable display 25 mm
- Automatic calculation of the tare, manual insert of tare, adder function

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-910-ICA

PCE-910 is a portable handheld digital differential pressure gauge, meter or manometer used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-910 features a dust-proof, splash-resistant housing, allowing the meter to be used under adverse conditions.

- ± 1 to 2000 mbar (± 0.01 to 29.00 psi) measuring range
- 10 measurement units: psi, mbar, inH2O, mH2O, inHg, mmHg, Torr, Pa / kPa, atm, kg/cm²
- Optional PC software with RS-232 cable sold separately as a data transfer accessory
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-910-ICA

PCE-910 is a portable handheld digital differential pressure manometer, meter or gauge used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-910 features a dust-proof, splash-resistant housing, allowing the meter to be used under adverse conditions.

- ± 1 to 2000 mbar (± 0.01 to 29.00 psi) measuring range
- 10 measurement units: psi, mbar, inH2O, mH2O, inHg, mmHg, Torr, Pa / kPa, atm, kg/cm²
- Optional PC software with RS-232 cable sold separately as a data transfer accessory
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-910-ICA

PCE-910 is a portable handheld digital differential pressure meter, gauge or manometer used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-910 features a dust-proof, splash-resistant housing, allowing the meter to be used under adverse conditions.

- ± 1 to 2000 mbar (± 0.01 to 29.00 psi) measuring range
- 10 measurement units: psi, mbar, inH2O, mH2O, inHg, mmHg, Torr, Pa / kPa, atm, kg/cm²
- Optional PC software with RS-232 cable sold separately as a data transfer accessory
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-910-ICA

PCE-910 is a portable handheld digital differential pressure vacuum gauge, meter or manometer used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-910 features a dust-proof, splash-resistant housing, allowing the meter to be used under adverse conditions.

- ± 1 to 2000 mbar (± 0.01 to 29.00 psi) measuring range
- 10 measurement units: psi, mbar, inH2O, mH2O, inHg, mmHg, Torr, Pa / kPa, atm, kg/cm²
- Optional PC software with RS-232 cable sold separately as a data transfer accessory
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DDA 10

The PCE-DDA 10 Shore A durometer is a portable handheld device used to check Shore A hardness in soft gums, elastomers, natural rubber, neoprenes, casting resin, white PVC, leather, etc. This digital durometer has a reading accuracy of 0.1 hardness units. The durometer comes manufacturer calibrated and can be optionally certified to ISO standards for an additional fee (see accessories for details).


- Portable handheld digital device
- For Shore A hardness testing
- Single and serial measurements
- Data transfer to PC

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-WSAC 50

PCE-WSAC 50 is an environmental meter alarm controller that displays the current wind speed as well as the average wind speed of the last 2 and 5 minutes. This environmental meter alarm controller allows measurement of the slightest of wind movements. PCE-WSAC 50 is used for a variety of wind monitoring applications in industries such as construction, mining, renewable energy and manufacturing.


- Pre-alarm and full alarm with visual and audible warnings
- Optional RS-485 modbus interface for data communication
- Measuring range: 0 ... 50 m/s or 0 ... 110 mph
- Incl. ISO calibration certificate

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-WSAC 50

PCE-WSAC 50 is an environmental tester alarm controller that displays the current wind speed as well as the average wind speed of the last 2 and 5 minutes. This environmental tester alarm controller allows measurement of the slightest of wind movements. PCE-WSAC 50 is used for a variety of wind monitoring applications in industries such as construction, mining, renewable energy and manufacturing.


- Pre-alarm and full alarm with visual and audible warnings
- Optional RS-485 modbus interface for data communication
- Measuring range: 0 ... 50 m/s or 0 ... 110 mph
- Incl. ISO calibration certificate

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-EP 1500

Mobile Floor Scale with 3 ranges, weight range up to 1,500 kg.


- Three ranges for high accuracy
- Accuracy ±0.05 % of current value
- Large removable display 25 mm
- Automatic calculation of the tare, manual insert of tare, adder function

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-EP 1500

Ground Scale with 3 ranges, weight range up to 1,500 kg.


- Three ranges for high accuracy
- Accuracy ±0.05 % of current value
- Large removable display 25 mm
- Automatic calculation of the tare, manual insert of tare, adder function


Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DDA 10

The PCE-DDA 10 shore hardness tester is an ergonomic device to check Shore hardness in gum, plastic and other non-metallic materials. It has been designed with a very high quality. The PCE-DDA 10 durometer is mainly used for soft gums, elastomers, natural rubber, neoprenes, casting resin, white PVC, leather, etc. It has a reading accuracy of 0.1 hardness units. The durometer (as all test instruments) comes manufacturer calibrated and can additionally be lab certified to ISO standards.


- Handheld device
- For Shore A measurements
- Single and Serial Measurements
- Data transfer to PC

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-910-ICA

PCE-910 is a portable handheld HVAC Meter, digital differential pressure gauge or manometer used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-910 features a dust-proof, splash-resistant housing, allowing the meter to be used under adverse conditions.

- ± 1 to 2000 mbar (± 0.01 to 29.00 psi) measuring range
- 10 measurement units: psi, mbar, inH2O, mH2O, inHg, mmHg, Torr, Pa / kPa, atm, kg/cm²
- Optional PC software with RS-232 cable sold separately as a data transfer accessory
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer