Query results | PCE Instruments

£ 325.00

Price excl. VAT &. delivery
2 year Warranty

The Carbon Monoxide Meter Gasman-CO is a unique gas meter which protects against a specific gas, inflammable or toxic. The Carbon Monoxide Meter warns with a penetrating alarm and an optical signal (useful in case when there are loud noises in the surroundings) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement. The Carbon Monoxide Meter fulfills all the European and international norms, even ATEX and UL standards.

- Non-rechargeable, 1-year battery
- For CO (Carbon Monoxide)
- Dust and water resistant - IP 65/67
- 0... 500 ppm

Condition Monitoring Tachometer PCE-T 238-ICA Incl. ISO Calibration Certificate

£ 325.00

Price excl. VAT &. delivery
2 year Warranty

The condition monitoring tachometer PCE-T 238 is a battery-powered hand-held device that allows mobile use. The condition monitoring tachometer can perform a contact measurement as well as a non-contact measurement. It is also possible to perform a measurement of the surface velocity. The condition monitoring tachometer allows a measurement of up to 99,999 revolutions per minute. This measuring range is possible with contactless measurements with the optical tachometer.

- Continuous data output
- Contactless measurement range: 5 ... 99,999 RPM

- Contact measurement range: 0.5 ... 19,999 RPM

- Surface measurement range: 0.05 ... 1,999.9 m/min
- Measuring distance without contact: 5 ... 150 cm / 1.9" ... 4.9 ft
- Incl. ISO calibration certificate

Dissolved Oxygen Meter Gasman-O2 "Oxygen"

£ 325.00

Price excl. VAT &. delivery
2 year Warranty

The Dissolved Oxygen Meter is a unique gas meter which protects against a specific gas, inflammable or toxic. The Gas Leak Detector warns with a penetrating alarm and an optical signal (useful in case when there are loud noises in the surroundings) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement. The Gas Leak Detector fulfills all the European and international norms, even ATEX and UL standards.

- Non-rechargeable, 1-year battery
- For NO₂ (Oxygen)
- Dust and water resistant - IP 65/67
- 0... 25% v/v

Electric Vehicle EVSE Tester PCE-EVSE 310

£ 325.00

Price excl. VAT &. delivery
2 year Warranty

The electric vehicle EVSE tester is for VDE 0100 testers to test charging stations (charging mode 3) for electric cars. This VDE tester can be used with the PCE-ITE 55B installation tester or with most other standard VDE 0100 testers. Thanks to the LEDs for voltage detection on the 3 phases, it can be quickly determined if there is an installation error.

- PE pre-test

- Proximity Pilot PP / Control Pilot CP

- Simulation CP fault "E" / PE fault

- Mains socket for measuring purposes

- Safety measuring sockets

- Optional adapter to type 1

Electric Vehicle EVSE Tester PCE-EVSE 310+

£ 325.00

Price excl. VAT &. delivery
2 year Warranty

- PE pre-test

- Proximity-Pilot PP / Control-Pilot CP

- Simulation CP error "E" / PE error

- Mains socket for measuring purposes

- Safety measuring sockets

- incl. type 2 plug and adapter to type 1

EV Test Instrument PCE-EVSE 310

£ 325.00

Price excl. VAT &. delivery
2 year Warranty

The EV test instrument is for VDE 0100 testers to test charging stations (charging mode 3) for electric cars. This VDE tester can be used with the PCE-ITE 55B installation tester or with most other standard VDE 0100 testers. Thanks to the LEDs for voltage detection on the 3 phases, it can be quickly determined if there is an installation error.

- PE pre-test

- Proximity Pilot PP / Control Pilot CP

- Simulation CP fault "E" / PE fault

- Mains socket for measuring purposes

- Safety measuring sockets

- Optional adapter to type 1

EV Test Instrument PCE-EVSE 310+

£ 325.00

Price excl. VAT &. delivery
2 year Warranty

- PE pre-test

- Proximity-Pilot PP / Control-Pilot CP

- Simulation CP error "E" / PE error

- Mains socket for measuring purposes

- Safety measuring sockets

- incl. type 2 plug and adapter to type 1

Gas Detector Gasman-CO "Carbon Monoxide"

£ 325.00

Price excl. VAT &. delivery
2 year Warranty

The Gas Detector Gasman-CO is a unique gas meter which protects against a specific gas, inflammable or toxic. The Gas Detector warns with a penetrating alarm and an optical signal (useful in case when there are loud noises in the surroundings) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement. The Gas Detector fulfills all the European and international norms, even ATEX and UL standards.

- Non-rechargeable, 1-year battery
- For CO (Carbon Monoxide)
- Dust and water resistant - IP 65/67
- 0... 500 ppm

Gas Detector Gasman-H2S "Hydrogen Sulfide"

£ 325.00

Price excl. VAT &. delivery
2 year Warranty

This gas detector is designed to be a cost-effective solution for applications where protection against a specific combustible or toxic gas is required. The Gasman gas detector is a standalone gas detector.

Gas detector for H2S
- Range: 0...100ppm
- Alarm: 5ppm
- Memory for 5000 events
- Data logger for 900 hours of storage with 1 minute intervals
- Interface for calibrating, configuring and reading out the data
- Weight only 130g / 4.5 oz

Gas Detector Gasman-O2 "Oxygen"

£ 325.00

Price excl. VAT &. delivery
2 year Warranty

The Gas Detector Gasman-O2 is a unique gas meter which protects against a specific gas, inflammable or toxic. The Gas Detector warns with a penetrating alarm and an optical signal (useful in case when there are loud noises in the surroundings) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement. The Gas Detector fulfills all the European and international norms, even ATEX and UL standards.

- Non-rechargeable, 1-year battery
- For NO₂ (Oxygen)
- Dust and water resistant - IP 65/67
- 0... 25% v/v

Gas Leak Detector Gasman-CO "Carbon Monoxide"

£ 325.00

Price excl. VAT &. delivery
2 year Warranty

The Gas Leak Detector Gasman-CO is a unique gas meter which protects against a specific gas, inflammable or toxic. The Gas Leak Detector warns with a penetrating alarm and an optical signal (useful in case when there are loud noises in the surroundings) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement. The Gas Leak Detector fulfills all the European and international norms, even ATEX and UL standards.

- Non-rechargeable, 1-year battery
- For CO (Carbon Monoxide)
- Dust and water resistant - IP 65/67
- 0... 500 ppm

Gas Leak Detector Gasman-H2S "Hydrogen Sulfide"

£ 325.00

Price excl. VAT &. delivery
2 year Warranty

This gas leak detector is designed to be a cost-effective solution for applications where protection against a specific combustible or toxic gas is required. The Gasman gas leak detector is a standalone gas detector.

Gas detector for H2S
- Range: 0...100ppm
- Alarm: 5ppm
- Memory for 5000 events
- Data logger for 900 hours of storage with 1 minute intervals
- Interface for calibrating, configuring and reading out the data
- Weight only 130g / 4.5 oz

Gas Leak Detector Gasman-O2 "Oxygen"

£ 325.00

Price excl. VAT &. delivery
2 year Warranty

The Gas Leak Detector Gasman-O2 is a unique gas meter which protects against a specific gas, inflammable or toxic. The Gas Leak Detector warns with a penetrating alarm and an optical signal (useful in case when there are loud noises in the surroundings) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement. The Gas Leak Detector fulfills all the European and international norms, even ATEX and UL standards.

- Non-rechargeable, 1-year battery
- For NO₂ (Oxygen)
- Dust and water resistant - IP 65/67
- 0... 25% v/v

Handheld Tachometer PCE-T 238-ICA Incl. ISO Calibration Certificate

£ 325.00

Price excl. VAT &. delivery
2 year Warranty

The handheld tachometer PCE-T 238 is a battery-powered device that allows mobile use. The handheld tachometer can perform a contact measurement as well as a non-contact measurement. It is also possible to perform a measurement of the surface velocity. The handheld tachometer allows a measurement of up to 99,999 revolutions per minute. This measuring range is possible with contactless measurements with the optical tachometer.

- Continuous data output
- Contactless measurement range: 5 ... 99,999 RPM

- Contact measurement range: 0.5 ... 19,999 RPM

- Surface measurement range: 0.05 ... 1,999.9 m/min
- Measuring distance without contact: 5 ... 150 cm / 1.9" ... 4.9 ft
- Incl. ISO calibration certificate

PAT Tester / Portable Appliance Testing Equipment PCE-EVSE 310

£ 325.00

Price excl. VAT &. delivery
2 year Warranty

The PAT tester / portable appliance testing equipment is for VDE 0100 testers to test charging stations (charging mode 3) for electric cars. This VDE tester can be used with the PCE-ITE 55B installation tester or with most other standard VDE 0100 testers. Thanks to the LEDs for voltage detection on the 3 phases, it can be quickly determined if there is an installation error.

- PE pre-test

- Proximity Pilot PP / Control Pilot CP

- Simulation CP fault "E" / PE fault

- Mains socket for measuring purposes

- Safety measuring sockets

- Optional adapter to type 1

PAT Tester / Portable Appliance Testing Equipment PCE-EVSE 310+

£ 325.00

Price excl. VAT &. delivery
2 year Warranty

- PE pre-test

- Proximity-Pilot PP / Control-Pilot CP

- Simulation CP error "E" / PE error

- Mains socket for measuring purposes

- Safety measuring sockets

- incl. type 2 plug and adapter to type 1

Tachometer PCE-T 238-ICA Incl. ISO Calibration Certificate

£ 325.00

Price excl. VAT &. delivery
2 year Warranty

The tachometer PCE-T 238 is a battery-powered hand-held device that allows mobile use. The handheld tachometer can perform a contact measurement as well as a non-contact measurement. It is also possible to perform a measurement of the surface velocity. The handheld tachometer allows a measurement of up to 99,999 revolutions per minute. This measuring range is possible with contactless measurements with the optical tachometer.

- Continuous data output
- Contactless measurement range: 5 ... 99,999 RPM

- Contact measurement range: 0.5 ... 19,999 RPM

- Surface measurement range: 0.05 ... 1,999.9 m/min
- Measuring distance without contact: 5 ... 150 cm / 1.9" ... 4.9 ft
- Incl. ISO calibration certificate

Automotive Tester PCE-CT 22BT

£ 324.00

Price excl. VAT &. delivery
2 year Warranty

With this Automotive Tester, layer thicknesses on metallic surfaces can be reliably determined. The Automotive Tester has a measuring range of 1500 µm. This means that the Automotive Tester is used, for example, in a paint shop, for incoming goods inspection or for an expert.

- Measuring range up to 1500 µm
- Measurable substrates: Fe, NFe
- Probe: internal
- Micro USB and Bluetooth interface
- Data storage for up to 600 measured values