Industrial Measurement Products and Solutions
Order no.: CA-C112

The Clamp on Tester from the C1XX series for multimeters has a diameter of 52 mm (2.0 in), maximum 1000 A AC, and is designed for power and harmonics measurement. The Clamp on Tester can be connected via 4 mm (0.2 in) safety plugs to a multimeter. It is also possible to connect the Clamp on Tester via the 4 mm (0.2 mm) sockets or the BNC connector to a data acquisition system. The test instrument comes manufacturer calibrated. As all instruments, it can be certified to ISO as an option.
- Measuring range: 10 mA ... 1000 A
- Transformer Ratio: 1000 / 1
- Connection: 4 mm / 0.2 in sockets

Manufacturer: Chauvin Arnoux GmbH
Test Instruments manufacturer
Order no.: CA-C112

The Current Clamp from the C1XX series for multimeters has a diameter of 52 mm (2.0 in), maximum 1000 A AC, and is designed for power and harmonics measurement. The Current Clamp can be connected via 4 mm (0.2 in) safety plugs to a multimeter. It is also possible to connect the Current Clamp via the 4 mm (0.2 mm) sockets or the BNC connector to a data acquisition system. The test instrument comes manufacturer calibrated. As all instruments, it can be certified to ISO as an option.
- Measuring range: 10 mA ... 1000 A
- Transformer Ratio: 1000 / 1
- Connection: 4 mm / 0.2 in sockets

Manufacturer: Chauvin Arnoux GmbH
Test Instruments manufacturer
Order no.: PCE-DDMU 10
The pressure transmitter PCE-DDMU 10 can be used for gases and air. The pressure transmitter can be used for relative and differential pressure.

- Max. ± 0.5% accuracy
- Optional display
- Switching outputs
- Radiated output signal
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-BMM 10-ICA
This PCE-BMM 10 digital multimeter is equipped for mobile as well as stationary operation. The digital multimeter PCE-BMM 10 can be used with mains voltage (AC power adapter) as well as in battery mode as supply voltage. A large range of functions of the measuring ranges leaves hardly anything to be desired.

- DC voltage
- AC voltage
- DC
- AC
- Diode test
- Frequency measurement
- Continuity measurement
- Resistance measurement
- incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-ISFET-ConeFET
- Measuring range: 0.00 ... 14.00 pH
- Normal beakers and containers
- deep containers up to 140 mm / 5.5 in
- liquids (low viscosity)
- viscous media (low to medium viscosity)
- Pasty media (medium to high viscosity)
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 5000H-ICA

PCE-CT 5000H is a coating thickness measuring instrument used for the rapid determination of coating thicknesses on ferrous (Type F) and non-ferrous (Type N) metals. The coating thickness gauge automatically detects the type of metal to be measured.


- Type F measuring range: 0 ... 5000 µm / 0 ... 5 mm / 0 ... 196 mils
- Type N measuring range: 0 ... 3000 µm / 0 ... 3 mm / 0 ... 118 mils
- Displays measuring units in μm, mm or mils
- Saves up to 2000 measurements to internal memory
- Practical V-groove on the measuring head
- Incl. ISO Calibration Certificate 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 5000H-ICA

PCE-CT 5000H is a dry film thickness (DFT) measuring instrument used for the rapid determination of coating thicknesses on ferrous (Type F) and non-ferrous (Type N) metals. The coating thickness meter automatically detects the type of metal to be measured.


- Type F measuring range: 0 ... 5000 µm / 0 ... 5 mm / 0 ... 196 mils
- Type N measuring range: 0 ... 3000 µm / 0 ... 3 mm / 0 ... 118 mils
- Displays measuring units in μm, mm or mils
- Saves up to 2000 measurements to internal memory
- Practical V-groove on the measuring head
- Incl. ISO Calibration Certificate 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 5000H-ICA

PCE-CT 5000H is a material coating thickness measuring instrument used for the rapid determination of coating thicknesses on ferrous (Type F) and non-ferrous (Type N) metals. The coating thickness meter automatically detects the type of metal to be measured.


- Type F measuring range: 0 ... 5000 µm / 0 ... 5 mm / 0 ... 196 mils
- Type N measuring range: 0 ... 3000 µm / 0 ... 3 mm / 0 ... 118 mils
- Displays measuring units in μm, mm or mils
- Saves up to 2000 measurements to internal memory
- Practical V-groove on the measuring head
- incl. ISO Calibration Certificate 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 5000H-ICA

PCE-CT 5000H is a paint thickness measuring instrument used for the rapid determination of coating thicknesses on ferrous (Type F) and non-ferrous (Type N) metals. The paint thickness gauge automatically detects the type of metal to be measured.


- Type F measuring range: 0 ... 5000 µm / 0 ... 5 mm / 0 ... 196 mils
- Type N measuring range: 0 ... 3000 µm / 0 ... 3 mm / 0 ... 118 mils
- Displays measuring units in μm, mm or mils
- Saves up to 2000 measurements to internal memory
- Practical V-groove on the measuring head
- Incl. ISO Calibration Certificate 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 5000H-ICA

PCE-CT 5000H is a surface testing - coating thickness measuring instrument used for the rapid determination of coating thicknesses on ferrous (Type F) and non-ferrous (Type N) metals. The coating thickness gauge automatically detects the type of metal to be measured.


- Type F measuring range: 0 ... 5000 µm / 0 ... 5 mm / 0 ... 196 mils
- Type N measuring range: 0 ... 3000 µm / 0 ... 3 mm / 0 ... 118 mils
- Displays measuring units in μm, mm or mils
- Saves up to 2000 measurements to internal memory
- Practical V-groove on the measuring head
- Incl. ISO Calibration Certificate 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 5000H-ICA

PCE-CT 5000H is a thickness measuring instrument used for the rapid determination of coating thicknesses on ferrous (Type F) and non-ferrous (Type N) metals. The thickness gauge automatically detects the type of metal to be measured.


- Type F measuring range: 0 ... 5000 µm / 0 ... 5 mm / 0 ... 196 mils
- Type N measuring range: 0 ... 3000 µm / 0 ... 3 mm / 0 ... 118 mils
- Displays measuring units in μm, mm or mils
- Saves up to 2000 measurements to internal memory
- Practical V-groove on the measuring head
- Incl. ISO Calibration Certificate 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HDM 15
The digital multimeter PCE-HDM 15 is a universal and robust measuring device. With this digital multimeter, voltages, currents, resistances and many other electrical quantities can be measured. As an additional function with the digital multimeter PCE-HDM 15, a Bluetooth connection can be established with a smartphone.

Multimeter with 11 measuring functions
- AC voltage AC V TRMS
- DC voltage DC V
- AC and DC AC + DC TRMS
- AC AC TRMS
- AC and DC AC + DC TRMS
- DC DC A
- Resistance
- Capacity
- Frequency
- Diode test
- Continuity test
- Thermal image
- Bluetooth interface
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HDM 15
The electrical tester PCE-HDM 15 is a universal and robust measuring device. With this electrical tester, voltages, currents, resistances and many other electrical quantities can be measured. As an additional function with the electrical tester PCE-HDM 15, a Bluetooth connection can be established with a smartphone.

Multimeter with 11 measuring functions
- AC voltage AC V TRMS
- DC voltage DC V
- AC and DC AC + DC TRMS
- AC AC TRMS
- AC and DC AC + DC TRMS
- DC DC A
- Resistance
- Capacity
- Frequency
- Diode test
- Continuity test
- Thermal image
- Bluetooth interface
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-IR10

Infrared Thermometer with LCD for continuous measurement of surface temperature of all solid materials, designed for fixed installation.


- Temperature range: -40 ... 600 °C / -40 ... 1112 °F
- Accuracy: ± 1% or ± 1°C / 1.8°F
- Optical resolution: 15:1
- Storage conditions: -40 ... 85°C / -40 ... 185°F
- Spectral range: 8.0 ... 14 µm
- Emissivity: 0.100 - 1.000 adjustable in digital mode, by units of 0.001
- Outputs: analogue, USB, RS-232, RS-485, relay

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PA C1
3 x current clamps for the PCE-PA 8300 (up to 1,200 A)
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-IR10

The PCE-IR10 HVAC Meter is made up of a small sensor head and a separate electrical component. The HVAC Meter sensor is so small that it can fit in almost any space. part from this, the device offers similar specifications as other devices.


- Temperature range: -40 ... 600°C / -40 ... 1112°F
- Accuracy: ± 1% or ± 1°C / 1.8°F
- Optical resolution: 15:1
- Storage conditions: -40 ... 85°C / -40 ... 185°F
- Spectral range: 8.0 ... 14 µm
- Emissivity: 0.100 - 1.000 adjustable in digital mode, by units of 0.001
- Outputs: analogue, USB, RS-232, RS-485, relay

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HDM 15
The infrared imaging camera is a universal and robust measuring device. With this infrared imaging camera, voltages, currents, resistances and many other electrical quantities can be measured. As an additional function with the infrared imaging camera, a Bluetooth connection can be established with a smartphone.

Multimeter with 11 measuring functions
- AC voltage AC V TRMS
- DC voltage DC V
- AC and DC AC + DC TRMS
- AC AC TRMS
- AC and DC AC + DC TRMS
- DC DC A
- Resistance
- Capacity
- Frequency
- Diode test
- Continuity test
- Thermal image
- Bluetooth interface
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VA 20-ICA

The PCE-VA 20 is a versatile multifunction air flow meter for determining environmental conditions such as wind, temperature and humidity. It is additionally used to test heating, ventilation and air conditioning / cooling (HVAC) systems. This triple thermometer-hygrometer-anemometer device has a 10 cm / 3.9" Ø fan impeller and a clear backlit LCD. Available functions include display hold, average / maximum / minimum value, auto shutdown, low-battery warning, and metric / imperial choice.


- Measures air flow velocity, volume flow, relative humidity, air temperature, dew
  point temperature and wet-bulb temperature
- Air flow velocity range: 0.2 ... 30 m/s (39.4 ... 5905.5 fpm)
- Accuracy: ±(1.5% of measured value + 0.3 m/s) when less than 20 m/s, ±
  (3% of measured value + 0.3 m/s) when more than 20 m/s
- Resolution: 0.1
- Incl. ISO Calibration Certificate 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VA 20-ICA

The PCE-VA 20 is a versatile multifunction air flow meter for determining environmental conditions such as wind, temperature and humidity. It is additionally used to test heating, ventilation and air conditioning / cooling (HVAC) systems. This triple thermometer-hygrometer-anemometer device has a 10 cm / 3.9" Ø fan impeller and a clear backlit LCD. Available functions include display hold, average / maximum / minimum value, auto shutdown, low-battery warning, and metric / imperial choice.


- Measures air flow velocity, volume flow, relative humidity, air temperature, dew
  point temperature and wet-bulb temperature
- Air flow velocity range: 0.2 ... 30 m/s (39.4 ... 5905.5 fpm)
- Accuracy: ±(1.5% of measured value + 0.3 m/s) when less than 20 m/s, ±
  (3% of measured value + 0.3 m/s) when more than 20 m/s
- Resolution: 0.1
- Incl. ISO Calibration Certificate 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VA 20-ICA

The PCE-VA 20 is a versatile multifunction air velocity meter for determining environmental conditions such as wind, temperature and humidity. It is additionally used to test heating, ventilation and air conditioning / cooling (HVAC) systems. This triple thermometer-hygrometer-anemometer device has a 10 cm / 3.9" Ø fan impeller and a clear backlit LCD. Available functions include display hold, average / maximum / minimum value, auto shutdown, low-battery warning, and metric / imperial choice.


- Measures air flow velocity, volume flow, relative humidity, air temperature, dew
  point temperature and wet-bulb temperature
- Air flow velocity range: 0.2 ... 30 m/s (39.4 ... 5905.5 fpm)
- Accuracy: ±(1.5% of measured value + 0.3 m/s) when less than 20 m/s, ±
  (3% of measured value + 0.3 m/s) when more than 20 m/s
- Resolution: 0.1
- Incl. ISO Calibration Certificate 

Manufacturer: PCE Instruments
Test Instruments manufacturer