Industrial Measurement Products and Solutions
Order no.: PCE-VM 31-HA

The PCE-VM 31-HA Condition Monitoring Human Vibration Meter is designed for measuring human vibration at the workplace. The Condition Monitoring Vibration Meter can calculate hand-arm vibration measurements according to ISO 5349 and whole-body vibration measurements according to ISO 2631.


- Measuring of human vibration at the workplace
- Velocity, acceleration, displacement
- 3 channel FFT
- TEDS support
- Includes hand-arm sensor only - whole-body sensor sold separately (see
  accessories)

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VM 31-HA

The PCE-VM 31-HA Human Vibration Analyzer is designed for measuring human vibration at the workplace. The Vibration Meter can calculate hand-arm vibration measurements according to ISO 5349 and whole-body vibration measurements according to ISO 2631.


- Measuring of human vibration at the workplace
- Velocity, acceleration, displacement
- 3 channel FFT
- TEDS support
- Includes hand-arm sensor only - whole-body sensor sold separately (see   
  accessories)

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VM 31-HA

The PCE-VM 31-HA Human Vibration Meter is designed for measuring human vibration at the workplace. The Vibration Meter can calculate hand-arm vibration measurements according to ISO 5349 and whole-body vibration measurements according to ISO 2631.


- Measuring of human vibration at the workplace
- Velocity, acceleration, displacement
- 3 channel FFT
- TEDS support
- Includes hand-arm sensor only - whole-body sensor sold separately (see
  accessories)

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VM 31-HA

The PCE-VM 31-HA Tri-Axial Accelerometer is designed for measuring human vibration at the workplace. The Accelerometer can calculate hand-arm vibration measurements according to ISO 5349 and whole-body vibration measurements according to ISO 2631.


- Measuring of human vibration at the workplace
- Velocity, acceleration, displacement
- 3 channel FFT
- TEDS support
- Includes hand-arm sensor only - whole-body sensor sold
  separately (see accessories)
 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-IVM 3D

The mechanical 3D Inspection Camera PCE-IVM 3D can be used for reflected light and transmitted light microscopy and therefore allows the creation of three-dimensional representations of the objects. This 3D mechanical Inspection Camera that allows object to be checked all around thanks to a mechanical mirror (360°).


- Magnification continuously from 12 ... 75 times
- Height adjustable for larger objects
- Incident and transmitted illumination
- Data transfer via USB 2.0
- 360° rotatable mirror


Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-IVM 3D

The mechanical 3D microscope PCE-IVM 3D can be used for reflected light and transmitted light microscopy and therefore allows the creation of three-dimensional representations of the objects. This 3D mechanical microscope that allows object to be checked all around thanks to a mechanical mirror (360°).


- Magnification continuously from 12 ... 75 times
- Height adjustable for larger objects
- Incident and transmitted illumination
- Data transfer via USB 2.0
- 360° rotatable mirror


Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DDM 50

The PCE-DDM 50 Crane Scale is the ideal tool for weighing big loads and for measuring strong tensile forces. The PCE-DDM 50 Crane Scale is delivered in a protective carrying case and includes two shackles made of heavy-duty steel. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.


- Measurement range: 50,000 kg / 500 kN / 110,231 lbs
- Resolution: 20 kg / 200 N
- Units of measurement: kg / t / lbs / N / kN
- Supplied with remote control indicator

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DDM 50

The PCE-DDM 50 Force Gauge is the ideal tool for weighing big loads and for measuring strong tensile forces. The PCE-DDM 50 Force Gauge is delivered in a protective carrying case and includes two shackles made of heavy-duty steel. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.


- Measurement range: 50,000 kg / 500 kN / 110,231 lbs
- Resolution: 20 kg / 200 N
- Units of measurement: kg / t / lbs / N / kN
- Supplied with remote control indicator

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DDM 50

The PCE-DDM 50 Hanging Scales are the ideal tool for weighing big loads and for measuring strong tensile forces. The hanging scales are delivered in a protective carrying case and includes two shackles made of heavy-duty steel. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.


- Measurement range: 50,000 kg / 500 kN / 110,231 lbs
- Resolution: 20 kg / 200 N
- Units of measurement: kg / t / lbs / N / kN
- Supplied with remote control indicator

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DDM 50

The Tension Dynamometer PCE-DDM 50 is the ideal tool for weighing big loads and for measuring strong tensile forces. The Tension Dynamometer PCE-DDM 50 is delivered in a protective carrying case and includes two shackles made of heavy-duty steel. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.


- Measurement range: 50,000 kg / 500 kN / 110,231 lbs
- Resolution: 20 kg / 200 N
- Units of measurement: kg / t / lbs / N / kN
- Supplied with remote control indicator

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DDM 50

The PCE-DDM 50 weighing hook is the ideal tool for weighing big loads and for measuring strong tensile forces. The PCE-DDM 50 weighing hook is delivered in a protective carrying case and includes two shackles made of heavy-duty steel. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.


- Measurement range: 50,000 kg / 500 kN / 110,231 lbs
- Resolution: 20 kg / 200 N
- Units of measurement: kg / t / lbs / N / kN
- Supplied with remote control indicator

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 6000F
The verifiable built-in counting scale of the PCE-SD ... F series is intended for flush installation and is optionally available with a built-in frame on request. The calibrated built-in counting scale is calibrated according to Calibration Class III and is approved throughout the EU for use for transfer of goods for two years.

- Weighing range : 6000 kg
- Readability : 2 kg
- Calibration included
- Calibratable M III
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PQC 30EU
The Dust Measuring Device PCE-PQC 30EU is the most advanced particle counter on the market. Integration into a building automation and clean room management system is easily possible via Ethernet or (optionally) Wireless 802.11 b / g, RS485 or RS232.

- Measuring range: 0.3 ... 25 μm
- Measurement channel sizes: 0.3, 0.5, 1.0, 3.0, 5.0, 10.0 μm
- Counting efficiency: 50% at 0.3 μm, 100% at > 0.45 μm according to JIS
- Interface: Ethernet, USB
- Incl. calibration certificate traceable to NIST ISO 21501-4 and JIS B9921
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 6000F
The verifiable built-in floor scale of the PCE-SD ... F series is intended for flush installation and is optionally available with a built-in frame on request. The calibrated built-in floor scale is calibrated according to Calibration Class III and is approved throughout the EU for use for transfer of goods for two years.

- Weighing range : 6000 kg
- Readability : 2 kg
- Calibration included
- Calibratable M III
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 6000F
The verifiable built-in industrial scale of the PCE-SD ... F series is intended for flush installation and is optionally available with a built-in frame on request. The calibrated built-in industrial scale is calibrated according to Calibration Class III and is approved throughout the EU for use for transfer of goods for two years.

- Weighing range : 6000 kg
- Readability : 2 kg
- Calibration included
- Calibratable M III
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 6000F
The verifiable built-in pallet scale of the PCE-SD ... F series is intended for flush installation and is optionally available with a built-in frame on request. The calibrated built-in pallet scale is calibrated according to Calibration Class III and is approved throughout the EU for use for transfer of goods for two years.

- Weighing range : 6000 kg
- Readability : 2 kg
- Calibration included
- Calibratable M III
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 6000F
The verifiable built-in parcel scale of the PCE-SD ... F series is intended for flush installation and is optionally available with a built-in frame on request. The calibrated built-in parcel scale is calibrated according to Calibration Class III and is approved throughout the EU for use for transfer of goods for two years.

- Weighing range : 6000 kg
- Readability : 2 kg
- Calibration included
- Calibratable M III
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PQC 30EU
The particle counter PCE-PQC 30EU is the most advanced particle counter on the market. Integration into a building automation and clean room management system is easily possible via Ethernet or (optionally) Wireless 802.11 b / g, RS485 or RS232.

- Measuring range: 0.3 ... 25 μm
- Measurement channel sizes: 0.3, 0.5, 1.0, 3.0, 5.0, 10.0 μm
- Counting efficiency: 50% at 0.3 μm, 100% at > 0.45 μm according to JIS
- Interface: Ethernet, USB
- Incl. calibration certificate traceable to NIST ISO 21501-4 and JIS B9921
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 6000F
The verifiable built-in platform scale of the PCE-SD ... F series is intended for flush installation and is optionally available with a built-in frame on request. The calibrated built-in platform scale is calibrated according to Calibration Class III and is approved throughout the EU for use for transfer of goods for two years.

- Weighing range : 6000 kg
- Readability : 2 kg
- Calibration included
- Calibratable M III
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 6000F
The verifiable built-in scale with software of the PCE-SD ... F series is intended for flush installation and is optionally available with a built-in frame on request. The calibrated built-in scale with software is calibrated according to Calibration Class III and is approved throughout the EU for use for transfer of goods for two years.

- Weighing range : 6000 kg
- Readability : 2 kg
- Calibration included
- Calibratable M III
Manufacturer: PCE Instruments
Test Instruments manufacturer