Order no.: PCE-GM 75
The surface tester has a measuring surface of Ø 4.5 mm. Thanks to this small measuring surface, the surface tester enables measurements on particularly small surfaces. With a maximum inaccuracy of 1%, the surface tester is a high-precision measuring instrument for fast and easy measurements on surfaces.

- Measuring range up to 1000 GU
- For measurements on small surfaces
- Precise measurements thanks to high accuracy
- Micro-USB interface for the PC connection
- Data memory for later evaluations
- Data memory: 1,245 measured values
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VE 200-KIT2

PCE-VE 200 is a surface testing - automotive tester / borescope or inspection camera, for nondestructive evaluation (NDE) and machine diagnostics. The PCE-VE 200 borescope provides excellent image quality at an affordable price. An ideal camera tool for diagnosing hard-to-reach places, the scope can be rotated 180 ° and offers 6 LED lights with adjustable intensity for optimal illumination. In addition, digital image magnification or zoom of up to 4 times is available.


Surface Testing - Automotive Tester / Borescope
- 3.5 in LCD display
- 3.28 ft cable length
- 0.18 in camera cable diameter
- 1/8 in camera head / CMOS chip image sensor
- 640 x 480 pixels AVI video resolution
- Micro SD card memory
- Micro USB 2.0 and TV outputs

Clamp Meter
This Clamp Meter has been developed to determine indirectly, the the AC/DC currents with high accuracy. A non-contact clamp meter and a torch to illuminate the area being measured, have been integrated into this device. The small size of this  Clamp Meter, makes it possible to use in small spaces with limited access.

- 4 digit LCD display with backlighting
- save function
- DCA zero rest function
- current tester, non-contact
- integrated light to illuminate measured area
- automatic range selection
- automatic disconnect
- clamp diameter: 18 mm 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VE 200-KIT2

PCE-VE 200 is a videoscope or inspection camera, for nondestructive evaluation (NDE) and machine diagnostics. The PCE-VE 200 videoscope provides excellent image quality at an affordable price. An ideal camera tool for diagnosing hard-to-reach places, the scope can be rotated 180 ° and offers 6 LED lights with adjustable intensity for optimal illumination. In addition, digital image magnification or zoom of up to 4 times is available.


Videoscope
- 3.5 in LCD display
- 3.28 ft cable length
- 0.18 in camera cable diameter
- 1/8 in camera head / CMOS chip image sensor
- 640 x 480 pixels AVI video resolution
- Micro SD card memory
- Micro USB 2.0 and TV outputs

Clamp Meter
This Clamp Meter has been developed to determine indirectly, the the AC/DC currents with high accuracy. A non-contact clamp meter and a torch to illuminate the area being measured, have been integrated into this device. The small size of this  Clamp Meter, makes it possible to use in small spaces with limited access.

- 4 digit LCD display with backlighting
- save function
- DCA zero rest function
- current tester, non-contact
- integrated light to illuminate measured area
- automatic range selection
- automatic disconnect
- clamp diameter: 18 mm 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SM61
The Data Logger PCE-SM61 allows you to quickly and easily query your process data via the Internet. Any device with RS485 interface can be connected to data logger. The data is retrieved via a web browser and can be carried out simultaneously by the PC, smartphone, tablet, etc., and by several users. In addition to the data query, the data logger can trigger alarms. The configuration can be done via USB or Ethernet interface.

 

- up to 100 devices with 25 registers can be connected
- Configuration via webbrowser
- Interface: RS485, Ethernet
- Memory: 1 GB Flash
- additional inputs / outputs: digital input or relay output (selectable)

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PH20M-ICA
The Food / Hygiene Meter PCE-PH20M is a useful handheld pH meter for food. The pH can be read off the large LCD display of the pH meter. pH measurement in foodstuffs production and processing is a ubiquitous method of measurement. It is needed in many downstream process steps and has a direct influence on the tactile, sensory and hygienic quality of foodstuffs.


- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Waterproof (IP 67)
- Data-Hold function
- Calibration: automatic, pH 4, 7, or 10
- Food: Meat etc.
- Including ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PH20M-ICA
The pH Meter PCE-PH20M is a useful handheld pH meter for food. The pH can be read off the large LCD display. pH measurement in foodstuffs production and processing is a ubiquitous method of measurement. It is needed in many downstream process steps and has a direct influence on the tactile, sensory and hygienic quality of foodstuffs.


- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Waterproof (IP 67)
- Data-Hold function
- Calibration: automatic, pH 4, 7, or 10
- Food: Meat etc.
- Including ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SM61
The remote maintenance module PCE-SM61 allows you to quickly and easily query your process data via the Internet. Any device with RS485 interface can be connected to the remote maintenance module. The data is retrieved via a web browser and can be carried out simultaneously by the PC, smartphone, tablet, etc., and by several users. In addition to the data query, the remote maintenance module can trigger alarms. The configuration can be done via USB or Ethernet interface.

 

- up to 100 devices with 25 registers can be connected
- Configuration via webbrowser
- Interface: RS485, Ethernet
- Memory: 1 GB Flash
- additional inputs / outputs: digital input or relay output (selectable)

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HT 300
The air humidity meter PCE-HT 300 is a laboratory data logger for temperature, dew point and humidity. The air humidity meter stores the measurement data on an internal 16 GB memory in CSV format. 

Measuring function
- Temperature: -10 ... 80°C / 14 ... 176°F
- Dew point: -10 ... 80°C / 14 ... 176°F
- Humidity: 0 ... 100% RH
- 16 GB of memory
- Storage as CSV
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RCM 12
The air humidity meter PCE-RCM 12 is used for indicative testing of environmental parameters. The air humidity meter PCE-RCM 12 enables the measurement of CO2, fine dust, temperature and relative humidity. The bright display of the air humidity meter provides information about these parameters. 


- Fine dust, CO2, formaldehyde, humidity, temperature
- Particle size channels: PM 2.5 / PM 10
- Temperature measuring range: -20 ... 70°C / -4 ... 158°F
- Humidity measuring range: 0 ... 100% r.H.
- Formaldehyde measuring range: 0.00 ... 5.00 mg/m³
- CO2 measuring range: 0 ... 9999 ppm
- For indicative measurements
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RCM 12
The Air Quality Particle Counting Meter PCE-RCM 12 is used for indicative testing of environmental parameters. The air quality particle counting meter PCE-RCM 12 enables the measurement of CO2, fine dust, temperature and relative humidity. The bright display of the air quality particle counting meter provides information about these parameters. 


- Fine dust, CO2, formaldehyde, humidity, temperature
- Particle size channels: PM 2.5 / PM 10
- Temperature measuring range: -20 ... 70°C / -4 ... 158°F
- Humidity measuring range: 0 ... 100% r.H.
- Formaldehyde measuring range: 0.00 ... 5.00 mg/m³
- CO2 measuring range: 0 ... 9999 ppm
- For indicative measurements
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RCM 12
The air sampler PCE-RCM 12 is used for indicative testing of environmental parameters. The air sampler PCE-RCM 12 enables the measurement of CO2, fine dust, temperature and relative humidity. The bright display of the air sampler provides information about these parameters. 


- Fine dust, CO2, formaldehyde, humidity, temperature
- Particle size channels: PM 2.5 / PM 10
- Temperature measuring range: -20 ... 70°C / -4 ... 158°F
- Humidity measuring range: 0 ... 100% r.H.
- Formaldehyde measuring range: 0.00 ... 5.00 mg/m³
- CO2 measuring range: 0 ... 9999 ppm
- For indicative measurements
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RCM 12
The Airborne Particle-Counting Hygiene Meter PCE-RCM 12 is used for indicative testing of environmental parameters. The airborne particle-counting hygiene meter PCE-RCM 12 enables the measurement of CO2, fine dust, temperature and relative humidity. The bright display of the airborne particle-counting hygiene meter provides information about these parameters. 


- Fine dust, CO2, formaldehyde, humidity, temperature
- Particle size channels: PM 2.5 / PM 10
- Temperature measuring range: -20 ... 70°C / -4 ... 158°F
- Humidity measuring range: 0 ... 100% r.H.
- Formaldehyde measuring range: 0.00 ... 5.00 mg/m³
- CO2 measuring range: 0 ... 9999 ppm
- For indicative measurements
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-BTT 1

The Automotive Tester / Belt Force Gauge PCE-BTT 1 is made to detect tension of gear belts. The measurement with the Automotive Tester / belt force gauge is really easy.


- Measuring range: 0 ... 750 N
- Display of status: Low, ok, high
- Maximum of thickness: 36 mm
- Overload alarm function: 750 N

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PS 150XL

Extremely affordable, Bench scale for everyday use. The Bench scale has a platform size 600 x 900 x 80 mm. The capacity of the Bench scale is 75 kg or 150 kg. Initialise the balance, weigh - it could not be easier.


- Weighing range: 150 kg
- Readability: 50 g
- Weighing surface: 600 x 900 mm
- Calibrateable

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DSX 20
The car measuring device PCE-DSX 20 is mostly used for speed or vibration measurement or for motion observations. This car measuring device has a small design and has a low weight. Thus, the car measuring device can be conveniently used even in measurements in hard to reach places.

Function
- Speed: 50 ... 35000 RPM / FPM
- Flash frequency
- phase shift
- Lamp type: Xenon flash
- Flash response time: 10 ... 30 μs
- With trigger input
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RCM 12
The carbon dioxide meter PCE-RCM 12 is used for indicative testing of environmental parameters. The carbon dioxide meter PCE-RCM 12 enables the measurement of CO2, fine dust, temperature and relative humidity. The bright display of the carbon dioxide meter provides information about these parameters. 


- Fine dust, CO2, formaldehyde, humidity, temperature
- Particle size channels: PM 2.5 / PM 10
- Temperature measuring range: -20 ... 70°C / -4 ... 158°F
- Humidity measuring range: 0 ... 100% r.H.
- Formaldehyde measuring range: 0.00 ... 5.00 mg/m³
- CO2 measuring range: 0 ... 9999 ppm
- For indicative measurements
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HT 300
The climate meter PCE-HT 300 is a laboratory data logger for temperature, dew point and humidity. The climate meter stores the measurement data on an internal 16 GB memory in CSV format. 

Measuring function
- Temperature: -10 ... 80°C / 14 ... 176°F
- Dew point: -10 ... 80°C / 14 ... 176°F
- Humidity: 0 ... 100% RH
- 16 GB of memory
- Storage as CSV
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RCM 12
The CO2 Analyzer PCE-RCM 12 is used for indicative testing of environmental parameters. The CO2 Analyzer PCE-RCM 12 enables the measurement of CO2, fine dust, temperature and relative humidity. The bright display of the CO2 Analyzer provides information about these parameters. 


- Fine dust, CO2, formaldehyde, humidity, temperature
- Particle size channels: PM 2.5 / PM 10
- Temperature measuring range: -20 ... 70°C / -4 ... 158°F
- Humidity measuring range: 0 ... 100% r.H.
- Formaldehyde measuring range: 0.00 ... 5.00 mg/m³
- CO2 measuring range: 0 ... 9999 ppm
- For indicative measurements
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RCM 12
The CO2 data logger PCE-RCM 12 is used for indicative testing of environmental parameters. The CO2 data logger PCE-RCM 12 enables the measurement of CO2, fine dust, temperature and relative humidity. The bright display of the CO2 data logger provides information about these parameters. 


- Fine dust, CO2, formaldehyde, humidity, temperature
- Particle size channels: PM 2.5 / PM 10
- Temperature measuring range: -20 ... 70°C / -4 ... 158°F
- Humidity measuring range: 0 ... 100% r.H.
- Formaldehyde measuring range: 0.00 ... 5.00 mg/m³
- CO2 measuring range: 0 ... 9999 ppm
- For indicative measurements
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DSX 20
The condition monitoring stroboscope PCE-DSX 20 is mostly used for speed or vibration measurement or for motion observations. This condition monitoring stroboscope has a small design and has a low weight. Thus, the tachometer can be conveniently used even in measurements in hard to reach places.

Function
- Speed: 50 ... 35000 RPM / FPM
- Flash frequency
- phase shift
- Lamp type: Xenon flash
- Flash response time: 10 ... 30 μs
- With trigger input
Manufacturer: PCE Instruments
Test Instruments manufacturer