Industrial Measurement Products and Solutions
Order no.: PCE-G 2
The Air Humidity Meter PCE-G 2 is used to measure the environmental parameters of temperature and humidity. The air humidity meter is used in warehouses, open-plan offices, schools, etc.

- Measuring range temperature: -40 ... 85 °C
- Measuring range humidity: 0 ... 99 % r.H.
- 55 mm character height
- Up to 30 m reading distance
- External sensor (wired)
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VE 200SV3

The automotive tester PCE-VE 200SV3 is a nondestructive inspection camera. Thus, the automotive tester PCE-VE 200SV3 is the ideal instrument for diagnosis in hard-to-reach places. For example, the areas of mechanical engineering, sanitary and heating engineering, and the entire construction and construction industry are among the main areas of application of the automotive tester PCE-VE 200SV3.

- Camera head diameter 9 mm / 0.4 in
- Cable length: 3 m / 9.9 ft
- Interface: Micro USB 2.0
- Memory: Micro SD card
- Front and side view camera

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 27FN

PCE-CT 27FN is a Car Measuring Device that takes non-destructive measurements of nonmagnetic coating, insulating layer and dry film thickness (DFT) on metal substrates such as steel and aluminum. Ideal for surface testing, automotive paint inspection, material testing and manufacturing quality control applications.


- Measuring range of 0 ... 1250 µm / 0 ... 50 mils
- Accuracy of ± (2% + 2 µm) / ± (2% + 0.1 mils)
- Features a resolution of 0.1 µ / 0.1 mils 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 27FN

PCE-CT 27FN is a Coating Thickness Gauge that takes non-destructive measurements of nonmagnetic coating, insulating layer and dry film thickness (DFT) on metal substrates such as steel and aluminum. Ideal for surface testing, automotive paint inspection, material testing and manufacturing quality control applications.


- Measuring range of 0 ... 1250 µm / 0 ... 50 mils
- Accuracy of ± (2% + 2 µm) / ± (2% + 0.1 mils)
- Features a resolution of 0.1 µ / 0.1 mils 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PMI 4
The concrete moisture meter is a measuring device for nondestructive moisture measurement on concrete and screed. Here, the spring electrodes of the concrete moisture meter are pressed onto the surface to be tested. Within seconds, the concrete moisture meter will show the moisture content to the operator.

- Relative scale: 0 ... 100%
- Accuracy: ± 0.5%
- Resolution: 0.1%
- For measuring the moisture in concrete and screed
- Numeric and graphical view
- Eight spring electrodes are used for the measurement

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CS 5000N

PCE-CS 5000N is a digital battery-powered Crane Scale that displays measurement values in kilograms (kg) or pounds (lbs). The Crane Scale comes factory calibrated and includes a hook, shackle and remote control. For an additional fee, the scale can be calibrated according to ISO standards.


- Maximum weighing capacity: 5000 kg / 11023 lbs ≈ 5 Tons
- Resolution: 1 kg
- Tare range: 100% full scale

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PMI 4
The damp meter is a measuring device for nondestructive moisture measurement on concrete and screed. Here, the spring electrodes of the damp meter are pressed onto the surface to be tested. Within seconds, the damp meter will show the moisture content to the operator.

- Relative scale: 0 ... 100%
- Accuracy: ± 0.5%
- Resolution: 0.1%
- For measuring the moisture in concrete and screed
- Numeric and graphical view
- Eight spring electrodes are used for the measurement

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-P15-ICA

PCE-P15 is a differential pressure manometer used to measure gauge pressure and true differential pressure in pneumatic, hydraulic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. 11 pressure units are selectable for Imperial and Metric measurement, including bar, mmHg, ozin², kgcm², psi, inH2, kPa, ftH2O|, inHg, cmH2O and mbar.

- Pressure measuring range: 0 to 1.034 bar / 0 to 15 psi
- Resolution: 0.001 bar / 0.01 psi
- Accuracy: ± 0.3% of full scale at 25°C / 77°F
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-P30-ICA

PCE-P30 is a differential pressure manometer used to measure gauge pressure and true differential pressure in pneumatic, hydraulic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. 11 pressure units are selectable for Imperial and Metric measurement, including bar, mmHg, ozin², kgcm², psi, inH2, kPa, ftH2O|, inHg, cmH2O and mbar.

- Pressure measuring range: 0 to 2.068 bar / 0 to 30 psi
- Resolution: 0.001 bar / 0.02 psi
- Accuracy: ± 0.3% of full scale at 25°C / 77°F
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-P15-ICA

PCE-P15 is a differential pressure meter used to measure gauge pressure and true differential pressure in pneumatic, hydraulic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. 11 pressure units are selectable for Imperial and Metric measurement, including bar, mmHg, ozin², kgcm², psi, inH2, kPa, ftH2O|, inHg, cmH2O and mbar.

- Pressure measuring range: 0 to 1.034 bar / 0 to 15 psi
- Resolution: 0.001 bar / 0.01 psi
- Accuracy: ± 0.3% of full scale at 25°C / 77°F
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-P30-ICA

PCE-P30 is a differential pressure meter used to measure gauge pressure and true differential pressure in pneumatic, hydraulic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. 11 pressure units are selectable for Imperial and Metric measurement, including bar, mmHg, ozin², kgcm², psi, inH2, kPa, ftH2O|, inHg, cmH2O and mbar.

- Pressure measuring range: 0 to 2.068 bar / 0 to 30 psi
- Resolution: 0.001 bar / 0.02 psi
- Accuracy: ± 0.3% of full scale at 25°C / 77°F
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-G 2
The digital thermometer PCE-G 2 is used to measure the environmental parameters of temperature and humidity. The digital thermometer is used in warehouses, open-plan offices, schools, etc.

- Measuring range temperature: -40 ... 85 °C
- Measuring range humidity: 0 ... 99 % r.H.
- 55 mm character height
- Up to 30 m reading distance
- External sensor (wired)
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CS 5000N

PCE-CS 5000N is a digital battery-powered Dynamometer that displays measurement values in kilograms (kg) or pounds (lbs). The Dynamometer comes factory calibrated and includes a hook, shackle and remote control. For an additional fee, the scale can be calibrated according to ISO standards.


- Maximum weighing capacity: 5000 kg / 11023 lbs ≈ 5 Tons
- Resolution: 1 kg
- Tare range: 100% full scale

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-G 2
The Environmental Meter PCE-G 2 is used to measure the environmental parameters of temperature and humidity. The environmental meter is used in warehouses, open-plan offices, schools, etc.

- Measuring range temperature: -40 ... 85 °C
- Measuring range humidity: 0 ... 99 % r.H.
- 55 mm character height
- Up to 30 m reading distance
- External sensor (wired)
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-G 2
The Environmental Tester PCE-G 2 is used to measure the environmental parameters of temperature and humidity. The environmental tester is used in warehouses, open-plan offices, schools, etc.

- Measuring range temperature: -40 ... 85 °C
- Measuring range humidity: 0 ... 99 % r.H.
- 55 mm character height
- Up to 30 m reading distance
- External sensor (wired)
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CS 5000N

PCE-CS 5000N is a digital battery-powered Force Gauge that displays measurement values in kilograms (kg) or pounds (lbs). The Force Gauge comes factory calibrated and includes a hook, shackle and remote control. For an additional fee, the scale can be calibrated according to ISO standards.


- Maximum weighing capacity: 5000 kg / 11023 lbs ≈ 5 Tons
- Resolution: 1 kg
- Tare range: 100% full scale 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CS 5000N

PCE-CS 5000N is a digital battery-powered hanging scale that displays measurement values in kilograms (kg) or pounds (lbs). The hanging scales come factory calibrated and includes a hook, shackle and remote control. For an additional fee, the scales can be calibrated according to ISO standards.


- Maximum weighing capacity: 5000 kg / 11023 lbs ≈ 5 Tons
- Resolution: 1 kg
- Tare range: 100% full scale

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CS 5000N

PCE-CS 5000N is a digital battery-powered Heavy Duty Scale that displays measurement values in kilograms (kg) or pounds (lbs). The Heavy Duty Scale comes factory calibrated and includes a hook, shackle and remote control. For an additional fee, the scale can be calibrated according to ISO standards.


- Maximum weighing capacity: 5000 kg / 11023 lbs ≈ 5 Tons
- Resolution: 1 kg
- Tare range: 100% full scale

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-G 2
The humidity detector PCE-G 2 is used to measure the environmental parameters of temperature and humidity. The humidity detector is used in warehouses, open-plan offices, schools, etc.

- Measuring range temperature: -40 ... 85 °C
- Measuring range humidity: 0 ... 99 % r.H.
- 55 mm character height
- Up to 30 m reading distance
- External sensor (wired)
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-G 2
The HVAC Meter PCE-G 2 is used to measure the environmental parameters of temperature and humidity. The HVAC meter is used in warehouses, open-plan offices, schools, etc.

- Measuring range temperature: -40 ... 85 °C
- Measuring range humidity: 0 ... 99 % r.H.
- 55 mm character height
- Up to 30 m reading distance
- External sensor (wired)
Manufacturer: PCE Instruments
Test Instruments manufacturer