Climate Meter PCE-VA 20
£ 260.00
Price excl. VAT &. delivery

PCE-VA 20 is a climate meter for testing heating, ventilation and air conditioning or cooling (HVAC) systems. This climate meter features a 10 cm / 3.9" Ø fan impeller, easy-to-read backlit LCD, and functions such as display hold, average value, maximum value, minimum value, battery-saving automatic power off, low-battery indicator, and metric or imperial unit selection.


  • Measures air flow velocity, volume flow, relative humidity, air temperature, dew  point temperature and wet-bulb temperature
  • Air flow velocity range: 0.2 … 30 m/s (39.4 … 5905.5 fpm)
  • Accuracy: ±(1.5% of measured value + 0.3 m/s) when less than 20 m/s, ±(3% of  measured value + 0.3 m/s) when more than 20 m/s
  • Resolution: 0.1

Condition Monitoring Anemometer PCE-VA 20
£ 260.00
Price excl. VAT &. delivery

The PCE-VA 20 is a Condition Monitoring Anemometer for testing heating, ventilation and air conditioning or cooling (HVAC) systems. This Condition Monitoring Anemometer features a 10 cm / 3.9" Ø fan impeller, easy-to-read backlit LCD, and functions such as display hold, average value, maximum value, minimum value, battery-saving automatic power off, low-battery indicator, and metric or imperial unit selection.


  • Measures air flow velocity, volume flow, relative humidity, air temperature, dew  point temperature and wet-bulb temperature
  • Air flow velocity range: 0.2 … 30 m/s (39.4 … 5905.5 fpm)
  • Accuracy: ±(1.5% of measured value + 0.3 m/s) when less than 20 m/s, ±(3% of  measured value + 0.3 m/s) when more than 20 m/s
  • Resolution: 0.1

 

Condition Monitoring Stroboscope PCE-DSX 10
£ 260.00
Price excl. VAT &. delivery
The condition monitoring stroboscope uses the so-called "stroboscope effect" to analyse fast movements, vibrations or periodic processes. With the help of 9 high-intensity LEDs, the condition monitoring stroboscope generates short flashes of light with an illuminance of up to 1500 lx. These flashes of light are emitted in synchronisation with the frequency of the movement to be monitored until the object appears to stand still to the observer.

  • Measuring range: 60 … 999999 rpm
  • Resolution: 1 rpm
  • Accuracy: 0.001 %
  • Frequency: 1 … 16666.66 Hz
  • Fine adjustment in steps, +10, +100 FPM
  • Light source 9 LEDs
  • 2.6" graphic display
Condition Monitoring Vibration Meter PCE-VT 1100
£ 260.00
Price excl. VAT &. delivery

The condition monitoring vibration meter is used as a hand-held measuring device for the individual assessment of vibrations on machines and systems. With the help of this condition monitoring vibration meter, the actual state can easily be determined on site. Thus, corresponding changes can be made directly on site after the measurement. 

  • Frequency range: 10 Hz … 1 kHz
  • Measures speed, distance, acceleration in metric units
  • Holds the reading after each measurement
  • Easy to handle and battery operated
  • Standard probe: 10mm
Condition Monitoring Vibration Meter PCE-VT 1100S
£ 260.00
Price excl. VAT &. delivery
The condition monitoring vibration meter is suitable for relative measurements on various machines. With the 45 mm long needle probe, you can access hard-to-reach places in machines and motors. For this reason, this condition monitoring vibration meter is used for rapid measurement of imbalance and for checking bearing and gear conditions.

 

  • Frequency range: 10 Hz … 1 kHz
  • Measures speed, distance, acceleration in metric units
  • Holds the reading after each measurement
  • Portable and battery operated
  • Needle probe: 45mm / 1.77"

 

Current Clamp PCE-MCM 10
£ 260.00
Price excl. VAT &. delivery
No-Shopping
The current clamp has a measurement range of ±99.9 mA DC. With an accuracy of 0.3% of rdg. +8 digits, the current clamp is a particularly accurate measuring instrument. In order to conveniently perform measurements with the current clamp, the current clamp itself is connected to a 1 meter / 3.3 ft cable.

  • Measuring range 1: ±20.99 mA DC
  • Measuring range 2: ±21.0 … ±99.9 mA DC
  • Diameter of clamp opening: Ø5 mm
  • Detachable current clamp with 1 m / 3.3 ft cable
Current Clamp PCE-MCM 10
£ 260.00
Price excl. VAT &. delivery
No-Shopping
The current clamp has a measurement range of ±99.9 mA DC. With an accuracy of 0.3% of rdg. +8 digits, the current clamp is a particularly accurate measuring instrument. In order to conveniently perform measurements with the current clamp, the current clamp itself is connected to a 1 meter / 3.3 ft cable.

  • Measuring range 1: ±20.99 mA DC
  • Measuring range 2: ±21.0 … ±99.9 mA DC
  • Diameter of clamp opening: Ø5 mm
  • Detachable current clamp with 1 m / 3.3 ft cable
Data Logger for Temperature and Humidity PCE-THD 50-ICA incl. Certificate
£ 260.00
Price excl. VAT &. delivery
ISO Calibration
The data logger for temperature and humidity is the ideal measuring device to check the climatic conditions in, for example, warehouses, production halls or greenhouses. The data logger for temperature and humidity can measure the ambient temperature and humidity.

  • Air temperature: -20 … 60 °C / -4 … 140 °F
  • Humidity: 0 … 100% RH
  • Wet bulb temperature, dew point
  • Data memory for 32,000 readings
  • Type K thermocouple
  • incl. ISO Calibration Certificate
Data Logger PCE-RD 100
£ 260.00
Price excl. VAT &. delivery
The Data Logger offers precise monitoring of the radon concentration within the range of 0.1 ... 99.9 pCi/L with an accuracy of < 10% at 10 pCi/L and a sensitivity of 30 CPH at 1 pCi/L. Our Data Logger discovers radon at an early stage, minimises health risks and enables continuous real-time monitoring. Current measurement data is recorded every 10 minutes and average values are calculated for 1 hour, 1 day and 7 days. The first reliable data output takes less than 1 hour.

  • measurement range: 0.1 ... 99.9 pCi/L (3700 Bq/m³)
  • resolution: 0.01 pCi/L
  • accuracy: <10 % at 10 pCi/L
  • data export to PC via memory card
  • app connection via WiFi
  • adjustable alarm
  • display: green, yellow, red