Order no.: PCE-228-R

The PCE-288-R Water Analysis Meter or Redox Meter is a very easy to use meter to measure mV / pH / ºC. In the PCE-228-R Redox Meter, values can be directly stored in the SD memory card (Excel format) or can be directly transferred in real time to a PC or laptop by means of the RS-232 interface.


- Good quality at an affordable price
- SD memory card (1 ... 16 GB)
- Values are directly stored in Excel format in the SD memory card (any
  additional software is required)
- RS-232 interface for real-time data transfer

 

Manufacturer: PCE Instruments
£ 258.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-CP 20
The multi-parameter water analysis meter PCE-CP 20 is a mobile measuring device for liquid analysis. This enables the most varied of measurements to be carried out with the multi-parameter water analysis meter. With this multi-parameter water analysis meter, for example, it is possible to determine alkalinity, chlorine, cyanuric acid or the pH value.

- Adjustable units: mg / l, ppm
- Bluetooth connection with app
- 503 nm / 570 nm / 620 nm LED
- Cuvette: 36 x ø 21 mm / 3.6 x ø 2.1 cm (10 ml)
- Up to 7 selectable parameters
Manufacturer: PCE Instruments
£ 258.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-T 238-ICA
The condition monitoring tachometer PCE-T 238 is a battery-powered hand-held device that allows mobile use. The condition monitoring tachometer can perform a contact measurement as well as a non-contact measurement. It is also possible to perform a measurement of the surface velocity. The condition monitoring tachometer allows a measurement of up to 99,999 revolutions per minute. This measuring range is possible with contactless measurements with the optical tachometer.

- Continuous data output
- Contactless measurement range: 5 ... 99,999 RPM
- Contact measurement range: 0.5 ... 19,999 RPM
- Surface measurement range: 0.05 ... 1,999.9 m/min
- Measuring distance without contact: 5 ... 150 cm / 1.9" ... 4.9 ft
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
£ 254.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-VD 3-ICA

PCE-VD 3-ICA is a condition monitoring vibration meter that measures 3-axis shock/vibration via a built-in accelerometer sensor. This condition monitoring vibration meter records 3-axis acceleration (X, Y, Z) vibration measurement data for Fast Fourier Transform (FFT) waveform analysis. The condition monitoring vibration meter connects to your PC via a USB port for configuration and for quick and easy data transfer.


- Measuring range: ±18 g per axis
- Frequency range: 0 ... 60 Hz
- Recording interval: Adjustable from 1 sec .... 24 hr
- Logs and stores up to 85,764 records
- Includes magnetic bracket with wall-mounting screws
- incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
£ 254.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-PH 25
The conductivity meter PCE-PH 25 offers the user comprehensive measuring applications. In addition to determining the pH value, the PCE-PH 25 conductivity meter also shows the conductivity, the filtrate dry residue, the salinity and the temperature of the sample. The conductivity meter PCE-PH 25 is a measuring instrument for mobile use.

- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Accuracy: ± 0.01 pH
- Measurement data memory for 50 data sets
- Self-calibration possible
- Display of salinity and conductivity
Manufacturer: PCE Instruments
£ 254.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-T 330-ICA
The digital thermometer has two measuring inputs. Each measuring input from the digital thermometer can be connected to a thermocouple of type K, T and J. With a measuring rate of 2 Hz, the digital thermometer shows rapid temperature fluctuations.

- Measuring range dependent on sensor: -200 ... 1370 °C / -328 ... 2498 °F
- Resolution: 0.01 °C
- Two-channel temperature data logger
- For thermocouples type K, T and J
- Data storage for 20,000 measuring points
- incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
£ 254.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-PH 25
The environmental meter PCE-PH 25 offers the user comprehensive measuring applications. In addition to determining the pH value, the PCE-PH 25 environmental meter also shows the conductivity, the filtrate dry residue, the salinity and the temperature of the sample. The environmental meter PCE-PH 25 is a measuring instrument for mobile use.

- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Accuracy: ± 0.01 pH
- Measurement data memory for 50 data sets
- Self-calibration possible
- Display of salinity and conductivity
Manufacturer: PCE Instruments
£ 254.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-PH 25
The environmental tester PCE-PH 25 offers the user comprehensive measuring applications. In addition to determining the pH value, the PCE-PH 25 environmental tester also shows the conductivity, the filtrate dry residue, the salinity and the temperature of the sample. The environmental tester PCE-PH 25 is a measuring instrument for mobile use.

- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Accuracy: ± 0.01 pH
- Measurement data memory for 50 data sets
- Self-calibration possible
- Display of salinity and conductivity
Manufacturer: PCE Instruments
£ 254.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-PH 25
The pH meter PCE-PH 25 offers the user comprehensive measuring applications. In addition to determining the pH value, the meter also shows the conductivity, the filtrate dry residue, the salinity and the temperature of the sample. The filtrate dry residue meter is a measuring instrument for mobile use.

- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Accuracy: ± 0.01 pH
- Measurement data memory for 50 data sets
- Self-calibration possible
- Display of salinity and conductivity
Manufacturer: PCE Instruments
£ 254.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-T 238-ICA
The handheld tachometer PCE-T 238 is a battery-powered device that allows mobile use. The handheld tachometer can perform a contact measurement as well as a non-contact measurement. It is also possible to perform a measurement of the surface velocity. The handheld tachometer allows a measurement of up to 99,999 revolutions per minute. This measuring range is possible with contactless measurements with the optical tachometer.

- Continuous data output
- Contactless measurement range: 5 ... 99,999 RPM
- Contact measurement range: 0.5 ... 19,999 RPM
- Surface measurement range: 0.05 ... 1,999.9 m/min
- Measuring distance without contact: 5 ... 150 cm / 1.9" ... 4.9 ft
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
£ 254.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-T 330-ICA
The HVAC meter has two measuring inputs. Each measuring input from the HVAC meter can be connected to a thermocouple of type K, T and J. With a measuring rate of 2 Hz, the HVAC meter shows rapid temperature fluctuations.

- Measuring range dependent on sensor: -200 ... 1370 °C / -328 ... 2498 °F
- Resolution: 0.01 °C
- Two-channel temperature data logger
- For thermocouples type K, T and J
- Data storage for 20,000 measuring points
- incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
£ 254.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-MO 2001

This Milliohmmeter comes with a large 3½ positions LCD display that shows the measurement values. Used for measuring binding energy in mines, planes, boats and also for both industrial and home installations.


- Measuring ranges: 100 μΩ ... 2000 Ω
- Resolution: 0.1 / 1/10 mΩ; 0.1 / 1 Ω
- Accuracy: ± 0.1%
- Measuring rate: approx. 0.4 s


Manufacturer: PCE Instruments
£ 254.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-VD 3-ICA

PCE-VD 3-ICA is a shock data logger that measures 3-axis shock/vibration via a built-in accelerometer sensor. This shock data logger records 3-axis acceleration (X, Y, Z) vibration measurement data for Fast Fourier Transform (FFT) waveform analysis. The shock data logger connects to your PC via a USB port for configuration and for quick and easy data transfer.


- Measuring range: ±18 g per axis
- Frequency range: 0 ... 60 Hz
- Recording interval: Adjustable from 1 sec .... 24 hr
- Logs and stores up to 85,764 records
- Includes magnetic bracket with wall-mounting screws
- incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
£ 254.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-T 238-ICA
The tachometer PCE-T 238 is a battery-powered hand-held device that allows mobile use. The handheld tachometer can perform a contact measurement as well as a non-contact measurement. It is also possible to perform a measurement of the surface velocity. The handheld tachometer allows a measurement of up to 99,999 revolutions per minute. This measuring range is possible with contactless measurements with the optical tachometer.

- Continuous data output
- Contactless measurement range: 5 ... 99,999 RPM
- Contact measurement range: 0.5 ... 19,999 RPM
- Surface measurement range: 0.05 ... 1,999.9 m/min
- Measuring distance without contact: 5 ... 150 cm / 1.9" ... 4.9 ft
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
£ 254.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-T 330-ICA
The temperature data logger has two measuring inputs. Each measuring input from the temperature data logger can be connected to a thermocouple of type K, T and J. With a measuring rate of 2 Hz, the temperature data logger shows rapid temperature fluctuations.

- Measuring range dependent on sensor: -200 ... 1370 °C / -328 ... 2498 °F
- Resolution: 0.01 °C
- Two-channel temperature data logger
- For thermocouples type K, T and J
- Data storage for 20,000 measuring points
- incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
£ 254.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-T 330-ICA
The temperature meter has two measuring inputs. Each measuring input from the temperature meter can be connected to a thermocouple of type K, T and J. With a measuring rate of 2 Hz, the temperature meter shows rapid temperature fluctuations.

- Measuring range dependent on sensor: -200 ... 1370 °C / -328 ... 2498 °F
- Resolution: 0.01 °C
- Two-channel temperature data logger
- For thermocouples type K, T and J
- Data storage for 20,000 measuring points
- incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
£ 254.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-T 330-ICA
The thermometer has two measuring inputs. Each measuring input from the thermometer can be connected to a thermocouple of type K, T and J. With a measuring rate of 2 Hz, the thermometer shows rapid temperature fluctuations.

- Measuring range dependent on sensor: -200 ... 1370 °C / -328 ... 2498 °F
- Resolution: 0.01 °C
- Two-channel temperature data logger
- For thermocouples type K, T and J
- Data storage for 20,000 measuring points
- incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
£ 254.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-VD 3-ICA

PCE-VD 3-ICA is a vibration analyzer that measures 3-axis shock/vibration via a built-in accelerometer sensor. This vibration analyzer records 3-axis acceleration (X, Y, Z) vibration measurement data for Fast Fourier Transform (FFT) waveform analysis. The vibration analyzer connects to your PC via a USB port for configuration and for quick and easy data transfer.


- Measuring range: ±18 g per axis
- Frequency range: 0 ... 60 Hz
- Recording interval: Adjustable from 1 sec .... 24 hr
- Logs and stores up to 85,764 records
- Includes magnetic bracket with wall-mounting screws
- incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
£ 254.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-VD 3-ICA

PCE-VD 3-ICA is a vibration data logger that measures 3-axis shock/vibration via a built-in accelerometer sensor. This vibration data logger records 3-axis acceleration (X, Y, Z) vibration measurement data for Fast Fourier Transform (FFT) waveform analysis. The vibration data logger connects to your PC via a USB port for configuration and for quick and easy data transfer.


- Measuring range: ±18 g per axis
- Frequency range: 0 ... 60 Hz
- Recording interval: Adjustable from 1 sec .... 24 hr
- Logs and stores up to 85,764 records
- Includes magnetic bracket with wall-mounting screws
- incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
£ 254.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-VD 3-ICA

PCE-VD 3-ICA is a vibration meter that measures 3-axis shock/vibration via a built-in accelerometer sensor. This vibration meter records 3-axis acceleration (X, Y, Z) vibration measurement data for Fast Fourier Transform (FFT) waveform analysis. The vibration meter connects to your PC via a USB port for configuration and for quick and easy data transfer.


- Measuring range: ±18 g per axis
- Frequency range: 0 ... 60 Hz
- Recording interval: Adjustable from 1 sec .... 24 hr
- Logs and stores up to 85,764 records
- Includes magnetic bracket with wall-mounting screws
- incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
£ 254.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer