The PCE-P30H current signal converter is used for direct voltages and currents between 12 V ... 1000 V DC or currents up to 150 A via separate shunts. The signal converter can convert the measured signals into an analog standard signal. Furthermore, the measured values can be distributed to process control systems via Modbus RTU.

- SD card memory and internal memory
- DC input for voltage and current via shunts (shunt resistor)
- Output galvanically isolated
- Alarm relay
- Modbus interface
- LC display
- 35 mm mounting rails

PCE-322A is a handheld, portable, professional Class II sound level meter or decibel (dB) meter with built-in data-logging or data-recording functionality. Thus, PCE-322A is ideal for real-time noise measurement as well as for long-term noise exposure monitoring over time. This PCE-322A decibel meter comes with a PCE-SC 42 acoustic calibrator. The decibel meter and acoustic calibrator are sold together as a set as PCE-322-SC42.

- Sound measuring range: 30 ...130 dB
- Resolution: 0.1 dB
- Accuracy: ±1.4 dB
- Memory: Stores up to 32,700 readings
- Sampling rate: 2 times per second
- ISO calibration available as an option

 

PCE-P05 is a portable handheld digital differential pressure manometer used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-P05 displays min / max / average values right on the meter's screen for comparison against current measurement values.

- Measuring Range: ± 34.5 kPa / ± 5 psi / ± 0.345 bar

- Resolution: 6.9 Pa / 0.001 psi / 0.000069 bar

- Displayable Units: bar, mmHg, ozin², kgcm², psi, inH2O, kPa, ftH2O, inHg, cmH2O, mbar

- Features real-time data-logging capabilities using the included PC software and USB cable

- Incl. ISO calibration certificate

 

PCE-P05 is a portable handheld digital differential pressure meter or manometer used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-P05 displays min / max / average values right on the meter's screen for comparison against current measurement values.

- Measuring Range: ± 34.5 kPa / ± 5 psi / ± 0.345 bar

- Resolution: 6.9 Pa / 0.001 psi / 0.000069 bar

- Displayable Units: bar, mmHg, ozin², kgcm², psi, inH2O, kPa, ftH2O, inHg, cmH2O, mbar

- Features real-time data-logging capabilities using the included PC software and USB cable

- Incl. ISO calibration certificate

 

PCE-P05 is a portable handheld digital HVAC meter or differential pressure manometer used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-P05 displays min / max / average values right on the meter's screen for comparison against current measurement values.

- Measuring Range: ± 34.5 kPa / ± 5 psi / ± 0.345 bar

- Resolution: 6.9 Pa / 0.001 psi / 0.000069 bar

- Displayable Units: bar, mmHg, ozin², kgcm², psi, inH2O, kPa, ftH2O, inHg, cmH2O, mbar

- Features real-time data-logging capabilities using the included PC software and USB cable

- Incl. ISO calibration certificate

 

The Laboratory Switching Power Supply has a voltage output of up to 500 V. This means that even consumers who need a higher voltage can be checked with the laboratory switching power supply. This enables transformers to be checked for their winding ratio using the laboratory switched-mode power supply. In order to minimize the risk of electric shock, the connection side of the laboratory switching power supply is equipped with 4 mm safety sockets. - 4 individually adjustable channels - Output voltage up to 500 V. - Handle for mobile transportation - self-regulating active cooling - 4 mm safety banana sockets - Protective conductor connection on the connection side

PCE-322A is a handheld, portable, professional Class II noise meter, sound meter or decibel (dB) meter with built-in data-logging or data-recording functionality. Thus, PCE-322A is ideal for real-time noise measurement as well as for long-term noise exposure monitoring over time.

- Sound measuring range: 30 ...130 dB
- Resolution: 0.1 dB
- Accuracy: ±1.4 dB
- Memory: Stores up to 32,700 readings
- Sampling rate: 2 times per second
- ISO calibration available as an option
- incl. Sound Calibrator

 

- Bluetooth connection with app
- 503 nm / 570 nm / 620 nm LED
- Cuvette: 36 x ø 21 mm / 3.6 x ø 2.1 cm (10 ml)
Parameters:

- Bluetooth connection with app
- 503 nm / 570 nm / 620 nm LED
- Cuvette: 36 x ø 21 mm / 3.6 x ø 2.1 cm (10 ml)
Parameters:

The power indicator PCE-NR30 is able to measure currents directly up to 63 A AC. The power indicator measures network parameters of symmetrically and asymmetrically loaded single-phase 2-wire systems and three-phase 3 or 4-wire systems.

- DIN rail power meter
- Measurement up to 63 A.
- For single-phase and three-phase systems
- Ethernet
- Data logger
- Profinet

PCE-P05 is a portable handheld digital differential pressure meter or manometer used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-P05 displays min / max / average values right on the meter's screen for comparison against current measurement values.

- Measuring Range: ± 34.5 kPa / ± 5 psi / ± 0.345 bar

- Resolution: 6.9 Pa / 0.001 psi / 0.000069 bar

- Displayable Units: bar, mmHg, ozin², kgcm², psi, inH2O, kPa, ftH2O, inHg, cmH2O, mbar

- Features real-time data-logging capabilities using the included PC software and USB cable

- Incl. ISO calibration certificate

 

PCE-288-R Redox Meter is a very easy to use meter to measure mV /pH / ºC. In the PC-228-R Redox Meter values can be directly stored in the SD memory card (Excel format) or can be directly transferred in real time to a PC or laptop by means of the RS-232 interface.

- Good quality at an affordable price
- SD memory card (1 ... 16 GB)
- Values are directly stored in Excel format in the SD memory card (any
  additional software is required)
- RS-232 interface for real time data transference

 

PCE-322A is a handheld, portable, professional Class II sound level meter or decibel (dB) meter with built-in data-logging or data-recording functionality. Thus, PCE-322A is ideal for real-time noise measurement as well as for long-term noise exposure monitoring over time. This PCE-322A sound data logger comes with a PCE-SC 42 acoustic calibrator. The sound data logger and acoustic calibrator are sold together as a set as PCE-322-SC42.

- Sound measuring range: 30 ...130 dB
- Resolution: 0.1 dB
- Accuracy: ±1.4 dB
- Memory: Stores up to 32,700 readings
- Sampling rate: 2 times per second
- ISO calibration available as an option

 

PCE-322A is a handheld, portable, professional Class 2 sound level meter or decibel (dB) meter with built-in data-logging or data-recording functionality. Thus, PCE-322A is ideal for real-time noise measurement as well as for long-term noise exposure monitoring over time. This PCE-322A sound level meter comes with a PCE-SC 42 acoustic calibrator. The sound level meter and acoustic calibrator are sold together as a set as PCE-322-SC42.

- Class 2
- Sound measuring range: 30 ...130 dB
- Resolution: 0.1 dB
- Frequency weighting: A, C
- Time weighting: Fast, slow
- Accuracy: ±1.4 dB
- Memory: Stores up to 32,700 readings
- Sampling rate: 2 times per second
- ISO calibration available as an option

 

The temperature and signal Data Logger with memory PCE-P30U has a wide range of applications. Besides converting various signals, the Data Logger can be used with memory for easy data logging tasks. The Data Logger has an SD memory card and is suitable for use with SD and SDHC cards. These logging test instruments are calibrated by the manufacturer. An ISO calibration certificate is available as an option.

- SD memory card and internal memory
- Universal input
- Output galvanically isolated
- Alarm relay
- Memory size of 534,336 sets of data (internal memory)

The signal converter with PCE-P30U has a wide application field. Besides the conversion of different signals, the signal converter can be used with memory for simple data logging tasks. The signal converter has an SD card memory and is suitable for both SD and SDHC cards.

- SD card memory and internal memory
- Universal input
- Output galvanically isolated
- Alarm relay

The PCE-P30H voltage current signal converter data logger is used for direct voltages and currents between 12 V ... 1000 V DC or currents up to 150 A via separate shunts. The signal converter data logger can convert the measured signals into an analog standard signal. Furthermore, the measured values can be distributed to process control systems via Modbus RTU.

- SD card memory and internal memory
- DC input for voltage and current via shunts (shunt resistor)
- Output galvanically isolated
- Alarm relay
- Modbus interface
- LC display
- 35 mm mounting rails

The PCE-P30H voltage signal converter is used for direct voltages and currents between 12 V ... 1000 V DC or currents up to 150 A via separate shunts. The signal converter can convert the measured signals into an analog standard signal. Furthermore, the measured values can be distributed to process control systems via Modbus RTU.

- SD card memory and internal memory
- DC input for voltage and current via shunts (shunt resistor)
- Output galvanically isolated
- Alarm relay
- Modbus interface
- LC display
- 35 mm mounting rails