The current clamp is the ideal measuring device to measure leakage currents. This is made possible by the extensive measuring range of the current clamp.

Measuring function
- AC current measurement
- DC voltage
- AC voltage
- Resistance
- Continuity test
- Temperature
- Capacity
- Diode test
- incl. ISO Calibration Certificate

The digital multimeter is the ideal measuring device to measure leakage currents. This is made possible by the extensive measuring range of the digital multimeter.

Measuring function
- AC current measurement
- DC voltage
- AC voltage
- Resistance
- Continuity test
- Temperature
- Capacity
- Diode test
- incl. ISO Calibration Certificate

The electrical tester is the ideal measuring device to measure leakage currents. This is made possible by the extensive measuring range of the electrical tester.

Measuring function
- AC current measurement
- DC voltage
- AC voltage
- Resistance
- Continuity test
- Temperature
- Capacity
- Diode test
- incl. ISO Calibration Certificate

The HVAC meter is the ideal measuring device to measure leakage currents. This is made possible by the extensive measuring range of the HVAC meter.

Measuring function
- AC current measurement
- DC voltage
- AC voltage
- Resistance
- Continuity test
- Temperature
- Capacity
- Diode test
- incl. ISO Calibration Certificate

The voltmeter is the ideal measuring device to measure leakage currents. This is made possible by the extensive measuring range of the voltmeter.

Measuring function
- AC current measurement
- DC voltage
- AC voltage
- Resistance
- Continuity test
- Temperature
- Capacity
- Diode test
- incl. ISO Calibration Certificate

Clamping table for HTGS for samples with Ø from 7 to 50 mm (max. 5 Nm nominal load).

Including clamping pins (ST-P) with urethane surface, length 10 mm. Recommended for locks, containers for eye drops, etc.

PCE-VS10 is a vibration meter, analyzer or sensor condition monitoring switch used to measure RMS and peak value of vibration velocity or acceleration piezoelectrically. This IP67-rated vibration monitoring switch features a red and green visual warning or alarm with programmable high pass and low pass filters.

- Frequency range (max.): 0.1 Hz ...10 kHz
- Measuring range: Acceleration = 0.1 ... 1000 m/s², Speed = Frequency-dependent
- Connections: Screw terminals for power supply (5 ... 30V DC) and Micro USB (internal)
- Mounting: M8 stud bolt

PCE-VS10 is a vibration meter, analyzer or sensor condition monitoring switch used to measure RMS and peak value of vibration velocity or acceleration piezoelectrically. This IP67-rated vibration monitoring switch features a red and green visual warning or alarm with programmable high pass and low pass filters.

- Frequency range (max.): 0.1 Hz ...10 kHz
- Measuring range: Acceleration = 0.1 ... 1000 m/s², Speed = Frequency-dependent
- Connections: Screw terminals for power supply (5 ... 30V DC) and Micro USB (internal)
- Mounting: M8 stud bolt

PCE-VS10 is a vibration meter, analyzer or sensor condition monitoring switch used to measure RMS and peak value of vibration velocity or acceleration piezoelectrically. This IP67-rated vibration monitoring switch features a red and green visual warning or alarm with programmable high pass and low pass filters.

- Frequency range (max.): 0.1 Hz ...10 kHz
- Measuring range: Acceleration = 0.1 ... 1000 m/s², Speed = Frequency-dependent
- Connections: Screw terminals for power supply (5 ... 30V DC) and Micro USB (internal)
- Mounting: M8 stud bolt

PCE-VS10 is a vibration meter, analyzer or sensor condition monitoring switch used to measure RMS and peak value of vibration velocity or acceleration piezoelectrically. This IP67-rated vibration monitoring switch features a red and green visual warning or alarm with programmable high pass and low pass filters.

- Frequency range (max.): 0.1 Hz ...10 kHz
- Measuring range: Acceleration = 0.1 ... 1000 m/s², Speed = Frequency-dependent
- Connections: Screw terminals for power supply (5 ... 30V DC) and Micro USB (internal)
- Mounting: M8 stud bolt

- Frequency range: 1 ... 15 KHz (HI)
- Measures speed, distance, acceleration
- Piezoelectric ceramic acceleration sensor
- Handy and battery operated
- Standard sensor: 10 mm / 0.4 in  attachment

- Frequency range: 1 ... 15 KHz (HI)
- Measures speed, distance, acceleration
- Piezoelectric ceramic acceleration sensor
- Handy and battery operated
- Standard sensor: 45 mm / 1.8" needle tip

The combination PCE-T 260 is a measuring instrument for use in maintenance, and production. In addition to the stroboscope function, the automotive tester also has the option of removing the rotational contacts and measuring temperatures.

- Optical tachometer
- Measuring range: 5 ... 99999 rpm
- Contact tachometer
- Stroboscope LED
- Temperature measurement: Type K, PT 1000, Infrared

The combination PCE-T 260 is a measuring instrument for use in maintenance, and production. In addition to the stroboscope function, the condition monitoring tachometer-stroboscope also has the option of removing the rotational contacts and measuring temperatures.

- Optical tachometer
- Measuring range: 5 ... 99999 rpm
- Contact tachometer
- Stroboscope LED
- Temperature measurement: Type K, PT 1000, Infrared

- Frequency range: 1 ... 15 KHz (HI)
- Measures speed, distance, acceleration
- Piezoelectric ceramic acceleration sensor
- Handy and battery operated
- Standard sensor: 10 mm / 0.4 in  attachment

- Frequency range: 1 ... 15 KHz (HI)
- Measures speed, distance, acceleration
- Piezoelectric ceramic acceleration sensor
- Handy and battery operated
- Standard sensor: 45 mm / 1.8" needle tip

The environmental meter PCE-228HTE is a mobile device for measuring pH, mV, °C and °F, complete with SD card memory and an RS-232 interface. This particular model includes a special pH electrode suitable for temperatures up to 100°C / 212°F.

- Measurement range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Accuracy: ±(0.02 pH + 2 digits)
- Memory: flexible via SD card memory 1 ... 16 GB
- Interface: RS-232
- Incl. special pH electrode: for temperatures to 100°C / 212°F
- Incl. ISO Calibration Certificate

The environmental tester PCE-228HTE is a mobile device for measuring pH, mV, °C and °F, complete with SD card memory and an RS-232 interface. This particular model includes a special pH electrode suitable for temperatures up to 100°C / 212°F.

- Measurement range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Accuracy: ±(0.02 pH + 2 digits)
- Memory: flexible via SD card memory 1 ... 16 GB
- Interface: RS-232
- Incl. special pH electrode: for temperatures to 100°C / 212°F
- Incl. ISO Calibration Certificate

The combination PCE-T 260 is a measuring instrument for use in maintenance, and production. In addition to the stroboscope function, the handheld tachometer also has the option of removing the rotational contacts and measuring temperatures.

- Optical tachometer
- Measuring range: 5 ... 99999 rpm
- Contact tachometer
- Stroboscope LED
- Temperature measurement: Type K, PT 1000, Infrared

The PCE-JR-911 HVAC Meter with Thermometer is a versatile tool in that it can measure the temperature of objects without contact and readings can be stored in memory and transferred to a computer by way of its RS-232 interface and software. This HVAC Meter comes complete with a Thermometer, allowing the user to program specific time intervals for taking measurements, such as over an entire week.

- Temperature range: -40 to 500°C / -40 ... 932°F
- Resolution: 0.1°C / 0.18°F
- Accuracy: ±2% of reading or ±2°C / 3.6°F
- Optical resolution: 8:1
- Emissivity: 0.3 to 1.0 (adjustable)
- Interface: RS-232
- Display: LCD