Order no.: PCE-SD 3000F
The verifiable built-in floor scale of the PCE-SD ... F series is intended for flush installation and is optionally available with a built-in frame on request.
The calibrated built-in floor scale is calibrated according to Calibration Class III and is approved throughout the EU for use for transfer of goods for two years.
- Weighing range : 3000 kg
- Readability : 1 kg
- Calibration included
- Calibratable M III
Manufacturer: PCE Instruments
£ 2,510.00
Price excl. VAT &. delivery
2 year Warranty
Order no.: PCE-SD 3000F
The verifiable built-in industrial scale of the PCE-SD ... F series is intended for flush installation and is optionally available with a built-in frame on request.
The calibrated built-in floor scale is calibrated according to Calibration Class III and is approved throughout the EU for use for transfer of goods for two years.
- Weighing range : 3000 kg
- Readability : 1 kg
- Calibration included
- Calibratable M III
Manufacturer: PCE Instruments
£ 2,510.00
Price excl. VAT &. delivery
2 year Warranty
Order no.: PCE-SD 3000F
The legal for trade balance is intended for flush installation and is optionally available with a built-in frame on request.
The legal for trade balance is calibrated according to Calibration Class III and is approved throughout the EU for use for transfer of goods for two years.
- Weighing range : 3000 kg
- Readability : 1 kg
- Calibration included
- Calibratable M III
Catalogue: Weighing Equipment / Scales and Balances / Legal for Trade Scales / Legal for Trade Balances
Manufacturer: PCE Instruments
£ 2,510.00
Price excl. VAT &. delivery
2 year Warranty
Order no.: PCE-SD 3000F
The legal for trade balance is intended for flush installation and is optionally available with a built-in frame on request.
The legal for trade balance is calibrated according to Calibration Class III and is approved throughout the EU for use for transfer of goods for two years.
- Weighing range : 3000 kg
- Readability : 1 kg
- Calibration included
- Calibratable M III
Catalogue: Weighing Equipment / Scales and Balances / Legal for Trade Scales / Legal for Trade Balances
Manufacturer: PCE Instruments
£ 2,510.00
Price excl. VAT &. delivery
2 year Warranty
Order no.: PCE-SD 3000F
The verifiable built-in pallet scale of the PCE-SD ... F series is intended for flush installation and is optionally available with a built-in frame on request.
The calibrated built-in pallet scale is calibrated according to Calibration Class III and is approved throughout the EU for use for transfer of goods for two years.
- Weighing range : 3000 kg
- Readability : 1 kg
- Calibration included
- Calibratable M III
Manufacturer: PCE Instruments
£ 2,510.00
Price excl. VAT &. delivery
2 year Warranty
Order no.: PCE-SD 3000F
The verifiable built-in parcel scale of the PCE-SD ... F series is intended for flush installation and is optionally available with a built-in frame on request.
The calibrated built-in parcel scale is calibrated according to Calibration Class III and is approved throughout the EU for use for transfer of goods for two years.
- Weighing range : 3000 kg
- Readability : 1 kg
- Calibration included
- Calibratable M III
Manufacturer: PCE Instruments
£ 2,510.00
Price excl. VAT &. delivery
2 year Warranty
Order no.: PCE-SD 3000F
The verifiable built-in platform scale of the PCE-SD ... F series is intended for flush installation and is optionally available with a built-in frame on request.
The calibrated built-in platform scale is calibrated according to Calibration Class III and is approved throughout the EU for use for transfer of goods for two years.
- Weighing range : 3000 kg
- Readability : 1 kg
- Calibration included
- Calibratable M III
Manufacturer: PCE Instruments
£ 2,510.00
Price excl. VAT &. delivery
2 year Warranty
Order no.: PCE-SD 3000F
The verifiable built-in scale with software of the PCE-SD ... F series is intended for flush installation and is optionally available with a built-in frame on request.
The calibrated built-in scale with software is calibrated according to Calibration Class III and is approved throughout the EU for use for transfer of goods for two years.
- Weighing range : 3000 kg
- Readability : 1 kg
- Calibration included
- Calibratable M III
Manufacturer: PCE Instruments
£ 2,510.00
Price excl. VAT &. delivery
2 year Warranty
Order no.: PCE-SD 3000F
The verifiable built-in shipping scale of the PCE-SD ... F series is intended for flush installation and is optionally available with a built-in frame on request.
The calibrated built-in shipping scale is calibrated according to Calibration Class III and is approved throughout the EU for use for transfer of goods for two years.
- Weighing range : 3000 kg
- Readability : 1 kg
- Calibration included
- Calibratable M III
Manufacturer: PCE Instruments
£ 2,510.00
Price excl. VAT &. delivery
2 year Warranty
Order no.: PCE-SD 3000F
The verifiable built-in weighbridge of the PCE-SD ... F series is intended for flush installation and is optionally available with a built-in frame on request.
The calibrated built-in weighbridge is calibrated according to Calibration Class III and is approved throughout the EU for use for transfer of goods for two years.
- Weighing range : 3000 kg
- Readability : 1 kg
- Calibration included
- Calibratable M III
Manufacturer: PCE Instruments
£ 2,510.00
Price excl. VAT &. delivery
2 year Warranty
Order no.: PCE-SD 3000F
The verifiable built-in weighing platform of the PCE-SD ... F series is intended for flush installation and is optionally available with a built-in frame on request.
The calibrated built-in weighing platform is calibrated according to Calibration Class III and is approved throughout the EU for use for transfer of goods for two years.
- Weighing range : 3000 kg
- Readability : 1 kg
- Calibration included
- Calibratable M III
Manufacturer: PCE Instruments
£ 2,510.00
Price excl. VAT &. delivery
2 year Warranty
Order no.: PCE-AS1
PCE-AS1 is an air sampling meter used to assess microbiological pollution and monitor hygiene. Designed for use in hospitals, clean rooms, food, beverage, cosmetics, and pharmaceutical production facilities. The PCE-AS1 air sampler meets the latest requirements for devices used for airborne microbial analysis of bacterial and fungal counts. Rate is 100 lpm or 3.53 cfm with 300 micropores. **Optional ISO lab calibration listed under accessories**
- Accommodates manual adjustment of air volumes from 10 to 6000 liters
- Offers data storage for up to 99 parameters / 2000 measurement records
- Aids in compliance with HACCP, FDA FMSA, USP 797 and ISO 14698-1
- Runs off a rechargeable battery or AC power
- Supports standard Petri dishes of 90 mm / 3.5 in
Manufacturer: PCE Instruments
£ 2,492.00
Price excl. VAT &. delivery
2 year Warranty
Order no.: PCE-SD 1500
The calibrated counting scales are ideal if you do not want to put scales into the ground.
Simply place the counting scales in the room, fix the floor scales to the ramp with the fixing plates included in the scope of delivery, connect the operating terminal to the socket, and you can start weighing.
- Weighing range: 1500 kg
- Readability: 0.5 kg
- Calibration included
- Verifiable M III
Manufacturer: PCE Instruments
£ 2,487.00
Price excl. VAT &. delivery
2 year Warranty
Order no.: PCE-SD 2000
The calibrated counting scale is ideal if you do not want to install a platform scale into the ground. Simply set up the counting scale in the hall, fix the counting scale and the access ramp with the fixing plates included in the scope of delivery, connect the control terminal to the socket and you can start weighing.
- Weighing range: 2000 kg
- Readability: 1 kg
- Calibration included
- Verifiable M III
- Weighing range: 2000 kg
- Readability: 1 kg
- Calibration included
- Verifiable M III
Manufacturer: PCE Instruments
£ 2,487.00
Price excl. VAT &. delivery
2 year Warranty
Order no.: PCE-3000UL
The UCI hardness tester PCE-3000UL can be used for quickly checking the hardness of components even after installation. The device offers a wide measurement range, easy handling, robust design, and a temperature resistance up to 40 °C (104 °F). Measures hardness in Rockwell, Brinell and Vickers, the UCI hardness tester can test the tensile strength of steels up to 1740 MPa or 70 HRC. The tester comes with two probes, one UCI probe for non-destructive testing and one Leeb probe for rebound testing.
- Non-destructive hardness testing
- Ultrasonic + Leeb hardness test method
- Ideal for thin metals, complex shapes, hardened layers, or requiring very small indentation
- Fast measurement times with very high accuracy
- 2 probes for UCI and Leeb rebound testing
Manufacturer: PCE Instruments
£ 2,487.00
Price excl. VAT &. delivery
2 year Warranty
Order no.: PCE-SD 1500
The calibrated floor scales are ideal if you do not want to fix scales into the ground.
Simply place the floor scales in the room, fix the floor scales to the ramp with the fixing plates included in the scope of delivery, connect the operating terminal to the socket, and you can start weighing.
- Weighing range: 1500 kg
- Readability: 0.5 kg
- Calibration included
- Verifiable M III
Manufacturer: PCE Instruments
£ 2,487.00
Price excl. VAT &. delivery
2 year Warranty
Order no.: PCE-SD 2000
The calibrated floor scale is ideal if you do not want to install a platform scale into the ground. Simply set up the floor scale in the hall, fix the floor scale and the access ramp with the fixing plates included in the scope of delivery, connect the control terminal to the socket and you can start weighing.
- Weighing range: 2000 kg
- Readability: 1 kg
- Calibration included
- Verifiable M III
- Weighing range: 2000 kg
- Readability: 1 kg
- Calibration included
- Verifiable M III
Manufacturer: PCE Instruments
£ 2,487.00
Price excl. VAT &. delivery
2 year Warranty
Order no.: PCE-3000UL
The UCI hardness tester PCE-3000UL can be used for quickly checking the hardness of components even after installation, two probes are included. The device offers a wide measurement range, easy handling, robust design, and a temperature resistance up to 40 °C (104 °F). Measures hardness in Rockwell, Brinell and Vickers, the UCI hardness tester can test the tensile strength of steels up to 1740 MPa or 70 HRC. The tester comes with two probes, one UCI probe for non-destructive testing and one Leeb probe for rebound testing.
- Non-destructive hardness testing
- Ultrasonic + Leeb hardness test method
- Ideal for thin metals, complex shapes, hardened layers, or requiring very small indentation
- Fast measurement times with very high accuracy
- 2 probes for UCI and Leeb rebound testing
Manufacturer: PCE Instruments
£ 2,487.00
Price excl. VAT &. delivery
2 year Warranty
Order no.: PCE-SD 1500
The calibrated industrial scales are ideal if you do not want to put scales into the ground.
Simply place the counting scales in the room, fix the industrial scales to the ramp with the fixing plates included in the scope of delivery, connect the operating terminal to the socket, and you can start weighing.
- Weighing range: 1500 kg
- Readability: 0.5 kg
- Calibration included
- Verifiable M III
Manufacturer: PCE Instruments
£ 2,487.00
Price excl. VAT &. delivery
2 year Warranty
Order no.: PCE-SD 2000
The calibrated industrial scale is ideal if you do not want to install a platform scale into the ground. Simply set up the industrial scale in the hall, fix the industrial scale and the access ramp with the fixing plates included in the scope of delivery, connect the control terminal to the socket and you can start weighing.
- Weighing range: 2000 kg
- Readability: 1 kg
- Calibration included
- Verifiable M III
- Weighing range: 2000 kg
- Readability: 1 kg
- Calibration included
- Verifiable M III
Manufacturer: PCE Instruments
£ 2,487.00
Price excl. VAT &. delivery
2 year Warranty