Order no.: PCE-322ALEQ
The environmental meter PCE-322ALEQ is particularly suitable for measuring noise in the field of industrial, health, safety and environmental monitoring.
The PCE-322ALEQ environmental meter has a logger function, which allows storage of up to 32700 readings.
- Automatic range: 30 ... 130 dB
- Manual range: 30 ... 80 / 50 ... 100 / 80 ... 130 dB
- Resolution: 0.1 dB
- Accuracy: ±1.4 dB
- Memory capacity: 32700 values
- incl. software for LEQ calculation
Important! The LEQ value is only calculated by the software after the data transfer from the device to the PC or laptop.
Manufacturer: PCE Instruments
Order no.: PCE-RCM 12
The environmental meter PCE-RCM 12 is used for indicative testing of environmental parameters.
The environmental meter PCE-RCM 12 enables the measurement of CO2, fine dust, temperature and relative humidity.
The bright display of the environmental meter provides information about these parameters.
- Fine dust, CO2, formaldehyde, humidity, temperature
- Particle size channels: PM 2.5 / PM 10
- Temperature measuring range: -20 ... 70°C
/ -4 ... 158°F
- Humidity measuring range: 0 ... 100% r.H.
- Formaldehyde measuring range: 0.00 ... 5.00 mg/m³
- CO2 measuring range: 0 ... 9999 ppm
- Formaldehyde measuring range: 0.00 ... 5.00 mg/m³
- CO2 measuring range: 0 ... 9999 ppm
- For indicative measurements
Manufacturer: PCE Instruments
Order no.: PCE-RCM 12
The environmental tester PCE-RCM 12 is used for indicative testing of environmental parameters.
The environmental tester PCE-RCM 12 enables the measurement of CO2, fine dust, temperature and relative humidity.
The bright display of the environmental tester provides information about these parameters.
- Fine dust, CO2, formaldehyde, humidity, temperature
- Particle size channels: PM 2.5 / PM 10
- Temperature measuring range: -20 ... 70°C
/ -4 ... 158°F
- Humidity measuring range: 0 ... 100% r.H.
- Formaldehyde measuring range: 0.00 ... 5.00 mg/m³
- CO2 measuring range: 0 ... 9999 ppm
- Formaldehyde measuring range: 0.00 ... 5.00 mg/m³
- CO2 measuring range: 0 ... 9999 ppm
- For indicative measurements
Manufacturer: PCE Instruments
Order no.: PCE-RCM 12
The formaldehyde meter PCE-RCM 12 is used for indicative testing of environmental parameters.
The formaldehyde meter PCE-RCM 12 enables the measurement of CO2, fine dust, temperature and relative humidity.
The bright display of the formaldehyde meter provides information about these parameters.
- Fine dust, CO2, formaldehyde, humidity, temperature
- Particle size channels: PM 2.5 / PM 10
- Temperature measuring range: -20 ... 70°C
/ -4 ... 158°F
- Humidity measuring range: 0 ... 100% r.H.
- Formaldehyde measuring range: 0.00 ... 5.00 mg/m³
- CO2 measuring range: 0 ... 9999 ppm
- Formaldehyde measuring range: 0.00 ... 5.00 mg/m³
- CO2 measuring range: 0 ... 9999 ppm
- For indicative measurements
Manufacturer: PCE Instruments
Order no.: PCE-RCM 12
The gas detector PCE-RCM 12 is used for indicative testing of environmental parameters.
The gas detector PCE-RCM 12 enables the measurement of CO2, fine dust, temperature and relative humidity.
The bright display of the gas detector provides information about these parameters.
- Fine dust, CO2, formaldehyde, humidity, temperature
- Particle size channels: PM 2.5 / PM 10
- Temperature measuring range: -20 ... 70°C
/ -4 ... 158°F
- Humidity measuring range: 0 ... 100% r.H.
- Formaldehyde measuring range: 0.00 ... 5.00 mg/m³
- CO2 measuring range: 0 ... 9999 ppm
- Formaldehyde measuring range: 0.00 ... 5.00 mg/m³
- CO2 measuring range: 0 ... 9999 ppm
- For indicative measurements
Manufacturer: PCE Instruments
Order no.: PCE-RCM 12
The gas leak detector PCE-RCM 12 is used for indicative testing of environmental parameters.
The gas leak detector PCE-RCM 12 enables the measurement of CO2, fine dust, temperature and relative humidity.
The bright display of the gas leak detector provides information about these parameters.
- Fine dust, CO2, formaldehyde, humidity, temperature
- Particle size channels: PM 2.5 / PM 10
- Temperature measuring range: -20 ... 70°C
/ -4 ... 158°F
- Humidity measuring range: 0 ... 100% r.H.
- Formaldehyde measuring range: 0.00 ... 5.00 mg/m³
- CO2 measuring range: 0 ... 9999 ppm
- Formaldehyde measuring range: 0.00 ... 5.00 mg/m³
- CO2 measuring range: 0 ... 9999 ppm
- For indicative measurements
Manufacturer: PCE Instruments
Order no.: PCE-RCM 12
The humidity detector PCE-RCM 12 is used for indicative testing of environmental parameters.
The humidity detector PCE-RCM 12 enables the measurement of CO2, fine dust, temperature and relative humidity.
The bright display of the humidity detector provides information about these parameters.
- Fine dust, CO2, formaldehyde, humidity, temperature
- Particle size channels: PM 2.5 / PM 10
- Temperature measuring range: -20 ... 70°C
/ -4 ... 158°F
- Humidity measuring range: 0 ... 100% r.H.
- Formaldehyde measuring range: 0.00 ... 5.00 mg/m³
- CO2 measuring range: 0 ... 9999 ppm
- Formaldehyde measuring range: 0.00 ... 5.00 mg/m³
- CO2 measuring range: 0 ... 9999 ppm
- For indicative measurements
Manufacturer: PCE Instruments
Order no.: color squid Union Jack
Magnetic stirrers are available in various designs. The further development of the magnetic stirrer is now with new motifs. Magnetic stirrers are generally characterized by their low maintenance, their small and robust design, the versatile designs and the design for continuous operation.
- digital speed indicator (LED)
- electronically controlled motor for more power
- larger speed range from 0 - 2,500 min-1
- colour: squid union jack
Manufacturer: IKA Werke GmbH & Co. KG
Order no.: PCE-DMM 50
The manometer PCE-DMM 50 is suitable for stationary and mobile pressure measurement. The manometer PCE-DMM 50 is used in mechanical and plant engineering, laboratory technology and environmental technology. This manometer is battery powered. The measuring range of the manometer reaches up to 600 bar.
- Max. 600 bar / 8702 psi
- Rotating display
- For hygienic applications
- Media: water, oxygen, fuels and oils
- Print: absolute or relative (user selectable)
- Diaphragm: Ceramics
- Accuracy class: 0.2
Manufacturer: PCE Instruments
Order no.: PCE-DMM 51
The manometer PCE-DMM 51 is suitable for flush mounting hygiene. Thus, the manometer can be installed both in the food industry as well as in medical technology. The manometer shows on its rotatable display pressures up to 400 bar, relative or absolute. The operating fluid of the manometer has a food safe FDA approval.
- Max. 400 bar / 5801 psi
- Rotating display
- For hygienic applications
- Media: water, paints and coatings, gases, viscous and paste media
- Pressure: relative
- Diaphragm: stainless steel flush
- Accuracy class: 0.2
Manufacturer: PCE Instruments
Order no.: PCE-322ALEQ
The noise datalogger PCE-322ALEQ is particularly suitable for measuring noise in the field of industrial, health, safety and environmental monitoring.
The PCE-322ALEQ noise datalogger has a logger function, which allows storage of up to 32700 readings.
- Automatic range: 30 ... 130 dB
- Manual range: 30 ... 80 / 50 ... 100 / 80 ... 130 dB
- Resolution: 0.1 dB
- Accuracy: ±1.4 dB
- Memory capacity: 32700 values
- incl. software for LEQ calculation
Important! The LEQ value is only calculated by the software after the data transfer from the device to the PC or laptop.
Manufacturer: PCE Instruments
Order no.: PCE-322ALEQ
The noise dose meter PCE-322ALEQ is particularly suitable for measuring noise in the field of industrial, health, safety and environmental monitoring.
The PCE-322ALEQ noise dose meter has a logger function, which allows storage of up to 32700 readings.
- Automatic range: 30 ... 130 dB
- Manual range: 30 ... 80 / 50 ... 100 / 80 ... 130 dB
- Resolution: 0.1 dB
- Accuracy: ±1.4 dB
- Memory capacity: 32700 values
- Incl. software for LEQ calculation
Important! The LEQ value is only calculated by the software after the data transfer from the device to the PC or laptop.
Manufacturer: PCE Instruments
Order no.: PCE-322ALEQ
The noise meter / sound meter PCE-322ALEQ is particularly suitable for measuring noise in the field of industrial, health, safety and environmental monitoring.
The PCE-322ALEQ noise meter / sound meter has a logger function, which allows storage of up to 32700 readings.
- Automatic range: 30 ... 130 dB
- Manual range: 30 ... 80 / 50 ... 100 / 80 ... 130 dB
- Resolution: 0.1 dB
- Accuracy: ±1.4 dB
- Memory capacity: 32700 values
- incl. software for LEQ calculation
Important! The LEQ value is only calculated by the software after the data transfer from the device to the PC or laptop.
Manufacturer: PCE Instruments
Order no.: PCE-RCM 12
The particle counter PCE-RCM 12 is used for indicative testing of environmental parameters.
The particle counter PCE-RCM 12 enables the measurement of CO2, fine dust, temperature and relative humidity.
The bright display of the particle counter provides information about these parameters.
- Fine dust, CO2, formaldehyde, humidity, temperature
- Particle size channels: PM 2.5 / PM 10
- Temperature measuring range: -20 ... 70°C
/ -4 ... 158°F
- Humidity measuring range: 0 ... 100% r.H.
- Formaldehyde measuring range: 0.00 ... 5.00 mg/m³
- CO2 measuring range: 0 ... 9999 ppm
- Formaldehyde measuring range: 0.00 ... 5.00 mg/m³
- CO2 measuring range: 0 ... 9999 ppm
- For indicative measurements
Manufacturer: PCE Instruments
Order no.: PCE-DMM 50
The pressure gauge PCE-DMM 50 is suitable for stationary and mobile pressure measurement. The pressure gauge PCE-DMM 50 is used in mechanical and plant engineering, laboratory technology and environmental technology. This pressure gauge is battery powered. The measuring range of the pressure gauge reaches up to 600 bar.
- Max. 600 bar / 8702 psi
- Rotating display
- For hygienic applications
- Media: water, oxygen, fuels and oils
- Print: absolute or relative (user selectable)
- Diaphragm: Ceramics
- Accuracy class: 0.2
Manufacturer: PCE Instruments
Order no.: PCE-DMM 51
The pressure gauge PCE-DMM 51 is suitable for flush mounting hygiene. Thus, the gauge can be installed both in the food industry as well as in medical technology. The pressure gauge shows on its rotatable display pressures up to 400 bar, relative or absolute. The operating fluid of the pressure gauge has a food safe FDA approval.
- Max. 400 bar / 5801 psi
- Rotating display
- For hygienic applications
- Media: water, paints and coatings, gases, viscous and paste media
- Pressure: relative
- Diaphragm: stainless steel flush
- Accuracy class: 0.2
Manufacturer: PCE Instruments
Order no.: PCE-DMM 50
The pressure indicator PCE-DMM 50 is suitable for stationary and mobile pressure measurement. The pressure indicator PCE-DMM 50 is used in mechanical and plant engineering, laboratory technology and environmental technology. This pressure indicator is battery powered. The measuring range of the pressure indicator reaches up to 600 bar.
- Max. 600 bar / 8702 psi
- Rotating display
- For hygienic applications
- Media: water, oxygen, fuels and oils
- Print: absolute or relative (user selectable)
- Diaphragm: Ceramics
- Accuracy class: 0.2
Manufacturer: PCE Instruments
Order no.: PCE-DMM 51
The pressure indicator PCE-DMM 51 is suitable for flush mounting hygiene. Thus, the indicator can be installed both in the food industry as well as in medical technology. The pressure indicator on its rotatable display pressures up to 400 bar, relative or absolute. The operating fluid of the pressure indicator has a food safe FDA approval.
- Max. 400 bar / 5801 psi
- Rotating display
- For hygienic applications
- Media: water, paints and coatings, gases, viscous and paste media
- Pressure: relative
- Diaphragm: stainless steel flush
- Accuracy class: 0.2
Manufacturer: PCE Instruments
Order no.: PCE-DMM 50
The pressure meter PCE-DMM 50 is suitable for stationary and mobile pressure measurement. The pressure meter PCE-DMM 50 is used in mechanical and plant engineering, laboratory technology and environmental technology. This pressure meter is battery powered. The measuring range of the pressure meter reaches up to 600 bar.
- Max. 600 bar / 8702 psi
- Rotating display
- For hygienic applications
- Media: water, oxygen, fuels and oils
- Print: absolute or relative (user selectable)
- Diaphragm: Ceramics
- Accuracy class: 0.2
Manufacturer: PCE Instruments
Order no.: PCE-DMM 51
The pressure meter PCE-DMM 51 is suitable for flush mounting hygiene. Thus, the meter can be installed both in the food industry as well as in medical technology. The pressure meter shows on its rotatable display pressures up to 400 bar, relative or absolute. The operating fluid of the pressure meter has a food safe FDA approval.
- Max. 400 bar / 5801 psi
- Rotating display
- For hygienic applications
- Media: water, paints and coatings, gases, viscous and paste media
- Pressure: relative
- Diaphragm: stainless steel flush
- Accuracy class: 0.2
Manufacturer: PCE Instruments