Industrial Measurement Products and Solutions
Order no.: PCE-VDL 24I
For this data logger PCE-VDL 24I the acceleration sensor is delivered with a sampling rate of 1600 Hz. The sensor measures the acceleration, which is currently acting on it (3 axes), for example shock / vibration. The measurements take place at predetermined (selectable) time intervals.

- 3-Axis acceleration up to 1600 Hz and ±16 g
- Evaluation software
- 32 GB SD memory card
- Small design: 86.8 x 44.1 x 22.2 mm / 3.4 x 1.7 x 0.87 in
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VDL 24I
For this accelerometer PCE-VDL 24I the acceleration sensor is delivered with a sampling rate of 1600 Hz. The sensor measures the acceleration, which is currently acting on it (3 axes), for example shock / vibration. The measurements take place at predetermined (selectable) time intervals.

- 3-Axis acceleration up to 1600 Hz and ±16 g
- 32 GB SD memory card
- Evaluation software
- Small design: 86.8 x 44.1 x 22.2 mm / 3.4 x 1.7 x 0.87 in
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RCM 12
The air humidity meter PCE-RCM 12 is used for indicative testing of environmental parameters. The air humidity meter PCE-RCM 12 enables the measurement of CO2, fine dust, temperature and relative humidity. The bright display of the air humidity meter provides information about these parameters. 


- Fine dust, CO2, formaldehyde, humidity, temperature
- Particle size channels: PM 2.5 / PM 10
- Temperature measuring range: -20 ... 70°C / -4 ... 158°F
- Humidity measuring range: 0 ... 100% r.H.
- Formaldehyde measuring range: 0.00 ... 5.00 mg/m³
- CO2 measuring range: 0 ... 9999 ppm
- For indicative measurements
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RCM 12
The Air Quality Particle Counting Meter PCE-RCM 12 is used for indicative testing of environmental parameters. The air quality particle counting meter PCE-RCM 12 enables the measurement of CO2, fine dust, temperature and relative humidity. The bright display of the air quality particle counting meter provides information about these parameters. 


- Fine dust, CO2, formaldehyde, humidity, temperature
- Particle size channels: PM 2.5 / PM 10
- Temperature measuring range: -20 ... 70°C / -4 ... 158°F
- Humidity measuring range: 0 ... 100% r.H.
- Formaldehyde measuring range: 0.00 ... 5.00 mg/m³
- CO2 measuring range: 0 ... 9999 ppm
- For indicative measurements
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RCM 12
The air sampler PCE-RCM 12 is used for indicative testing of environmental parameters. The air sampler PCE-RCM 12 enables the measurement of CO2, fine dust, temperature and relative humidity. The bright display of the air sampler provides information about these parameters. 


- Fine dust, CO2, formaldehyde, humidity, temperature
- Particle size channels: PM 2.5 / PM 10
- Temperature measuring range: -20 ... 70°C / -4 ... 158°F
- Humidity measuring range: 0 ... 100% r.H.
- Formaldehyde measuring range: 0.00 ... 5.00 mg/m³
- CO2 measuring range: 0 ... 9999 ppm
- For indicative measurements
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RCM 12
The Airborne Particle-Counting Hygiene Meter PCE-RCM 12 is used for indicative testing of environmental parameters. The airborne particle-counting hygiene meter PCE-RCM 12 enables the measurement of CO2, fine dust, temperature and relative humidity. The bright display of the airborne particle-counting hygiene meter provides information about these parameters. 


- Fine dust, CO2, formaldehyde, humidity, temperature
- Particle size channels: PM 2.5 / PM 10
- Temperature measuring range: -20 ... 70°C / -4 ... 158°F
- Humidity measuring range: 0 ... 100% r.H.
- Formaldehyde measuring range: 0.00 ... 5.00 mg/m³
- CO2 measuring range: 0 ... 9999 ppm
- For indicative measurements
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RCM 12
The carbon dioxide meter PCE-RCM 12 is used for indicative testing of environmental parameters. The carbon dioxide meter PCE-RCM 12 enables the measurement of CO2, fine dust, temperature and relative humidity. The bright display of the carbon dioxide meter provides information about these parameters. 


- Fine dust, CO2, formaldehyde, humidity, temperature
- Particle size channels: PM 2.5 / PM 10
- Temperature measuring range: -20 ... 70°C / -4 ... 158°F
- Humidity measuring range: 0 ... 100% r.H.
- Formaldehyde measuring range: 0.00 ... 5.00 mg/m³
- CO2 measuring range: 0 ... 9999 ppm
- For indicative measurements
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VDL 24I
For this climate meter PCE-VDL 24I the acceleration sensor is delivered with a sampling rate of 1600 Hz. The sensor measures the acceleration, which is currently acting on it (3 axes), for example shock / vibration. The measurements take place at predetermined (selectable) time intervals.

- 3-Axis acceleration up to 1600 Hz and ±16 g
- 32 GB SD memory card
- Evaluation software
- Small design: 86.8 x 44.1 x 22.2 mm / 3.4 x 1.7 x 0.87 in
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RCM 12
The CO2 Analyzer PCE-RCM 12 is used for indicative testing of environmental parameters. The CO2 Analyzer PCE-RCM 12 enables the measurement of CO2, fine dust, temperature and relative humidity. The bright display of the CO2 Analyzer provides information about these parameters. 


- Fine dust, CO2, formaldehyde, humidity, temperature
- Particle size channels: PM 2.5 / PM 10
- Temperature measuring range: -20 ... 70°C / -4 ... 158°F
- Humidity measuring range: 0 ... 100% r.H.
- Formaldehyde measuring range: 0.00 ... 5.00 mg/m³
- CO2 measuring range: 0 ... 9999 ppm
- For indicative measurements
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RCM 12
The CO2 data logger PCE-RCM 12 is used for indicative testing of environmental parameters. The CO2 data logger PCE-RCM 12 enables the measurement of CO2, fine dust, temperature and relative humidity. The bright display of the CO2 data logger provides information about these parameters. 


- Fine dust, CO2, formaldehyde, humidity, temperature
- Particle size channels: PM 2.5 / PM 10
- Temperature measuring range: -20 ... 70°C / -4 ... 158°F
- Humidity measuring range: 0 ... 100% r.H.
- Formaldehyde measuring range: 0.00 ... 5.00 mg/m³
- CO2 measuring range: 0 ... 9999 ppm
- For indicative measurements
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VDL 24I
For this vibration meter PCE-VDL 24I the acceleration sensor is delivered with a sampling rate of 1600 Hz. The sensor measures the acceleration, which is currently acting on it (3 axes), for example shock / vibration. The measurements take place at predetermined (selectable) time intervals.

- 3-Axis acceleration up to 1600 Hz and ±16 g
- 32 GB SD memory card
- Evaluation software
- Small design: 86.8 x 44.1 x 22.2 mm / 3.4 x 1.7 x 0.87 in
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-322ALEQ
The decibel meter PCE-322ALEQ is particularly suitable for measuring noise in the field of industrial, health, safety and environmental monitoring. The PCE-322ALEQ decibel meter has a logger function, which allows storage of up to 32700 readings.


- Automatic range: 30 ... 130 dB
- Manual range: 30 ... 80 / 50 ... 100 / 80 ... 130 dB
- Resolution: 0.1 dB
- Accuracy: ±1.4 dB
- Memory capacity: 32700 values
- incl. software for LEQ calculation


Important! The LEQ value is only calculated by the software after the data transfer from the device to the PC or laptop.

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RCM 12
The Dust Monitor PCE-RCM 12 is used for indicative testing of environmental parameters. The Dust Monitor PCE-RCM 12 enables the measurement of CO2, fine dust, temperature and relative humidity. The bright display of the Dust Monitor provides information about these parameters. 


- Fine dust, CO2, formaldehyde, humidity, temperature
- Particle size channels: PM 2.5 / PM 10
- Temperature measuring range: -20 ... 70°C / -4 ... 158°F
- Humidity measuring range: 0 ... 100% r.H.
- Formaldehyde measuring range: 0.00 ... 5.00 mg/m³
- CO2 measuring range: 0 ... 9999 ppm
- For indicative measurements
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RCM 12
The dust particle measuring device PCE-RCM 12 is used for orientation testing of environmental parameters. The dust particle measuring device PCE-RCM 12 enables the measurement of CO2, fine dust, temperature and relative humidity. The bright display of the dust particle measuring device provides information about these parameters. 


- Fine dust, CO2, formaldehyde, humidity, temperature
- Particle size channels: PM 2.5 / PM 10
- Temperature measuring range: -20 ... 70°C / -4 ... 158°F
- Humidity measuring range: 0 ... 100% r.H.
- Formaldehyde measuring range: 0.00 ... 5.00 mg/m³
- CO2 measuring range: 0 ... 9999 ppm
- For indicative measurements
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-322ALEQ
The environmental meter PCE-322ALEQ is particularly suitable for measuring noise in the field of industrial, health, safety and environmental monitoring. The PCE-322ALEQ environmental meter has a logger function, which allows storage of up to 32700 readings.


- Automatic range: 30 ... 130 dB
- Manual range: 30 ... 80 / 50 ... 100 / 80 ... 130 dB
- Resolution: 0.1 dB
- Accuracy: ±1.4 dB
- Memory capacity: 32700 values
- incl. software for LEQ calculation


Important! The LEQ value is only calculated by the software after the data transfer from the device to the PC or laptop.

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RCM 12
The environmental meter PCE-RCM 12 is used for indicative testing of environmental parameters. The environmental meter PCE-RCM 12 enables the measurement of CO2, fine dust, temperature and relative humidity. The bright display of the environmental meter provides information about these parameters. 


- Fine dust, CO2, formaldehyde, humidity, temperature
- Particle size channels: PM 2.5 / PM 10
- Temperature measuring range: -20 ... 70°C / -4 ... 158°F
- Humidity measuring range: 0 ... 100% r.H.
- Formaldehyde measuring range: 0.00 ... 5.00 mg/m³
- CO2 measuring range: 0 ... 9999 ppm
- For indicative measurements
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RCM 12
The environmental tester PCE-RCM 12 is used for indicative testing of environmental parameters. The environmental tester PCE-RCM 12 enables the measurement of CO2, fine dust, temperature and relative humidity. The bright display of the environmental tester provides information about these parameters. 


- Fine dust, CO2, formaldehyde, humidity, temperature
- Particle size channels: PM 2.5 / PM 10
- Temperature measuring range: -20 ... 70°C / -4 ... 158°F
- Humidity measuring range: 0 ... 100% r.H.
- Formaldehyde measuring range: 0.00 ... 5.00 mg/m³
- CO2 measuring range: 0 ... 9999 ppm
- For indicative measurements
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RCM 12
The formaldehyde meter PCE-RCM 12 is used for indicative testing of environmental parameters. The formaldehyde meter PCE-RCM 12 enables the measurement of CO2, fine dust, temperature and relative humidity. The bright display of the formaldehyde meter provides information about these parameters. 


- Fine dust, CO2, formaldehyde, humidity, temperature
- Particle size channels: PM 2.5 / PM 10
- Temperature measuring range: -20 ... 70°C / -4 ... 158°F
- Humidity measuring range: 0 ... 100% r.H.
- Formaldehyde measuring range: 0.00 ... 5.00 mg/m³
- CO2 measuring range: 0 ... 9999 ppm
- For indicative measurements
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RCM 12
The gas detector PCE-RCM 12 is used for indicative testing of environmental parameters. The gas detector PCE-RCM 12 enables the measurement of CO2, fine dust, temperature and relative humidity. The bright display of the gas detector provides information about these parameters. 


- Fine dust, CO2, formaldehyde, humidity, temperature
- Particle size channels: PM 2.5 / PM 10
- Temperature measuring range: -20 ... 70°C / -4 ... 158°F
- Humidity measuring range: 0 ... 100% r.H.
- Formaldehyde measuring range: 0.00 ... 5.00 mg/m³
- CO2 measuring range: 0 ... 9999 ppm
- For indicative measurements
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RCM 12
The gas leak detector PCE-RCM 12 is used for indicative testing of environmental parameters. The gas leak detector PCE-RCM 12 enables the measurement of CO2, fine dust, temperature and relative humidity. The bright display of the gas leak detector provides information about these parameters. 


- Fine dust, CO2, formaldehyde, humidity, temperature
- Particle size channels: PM 2.5 / PM 10
- Temperature measuring range: -20 ... 70°C / -4 ... 158°F
- Humidity measuring range: 0 ... 100% r.H.
- Formaldehyde measuring range: 0.00 ... 5.00 mg/m³
- CO2 measuring range: 0 ... 9999 ppm
- For indicative measurements
Manufacturer: PCE Instruments
Test Instruments manufacturer