Order no.: CA-MN73

Current Clamp for multimeters, oscilloscopes and current faults, max. 200 A AC, max. diameter 20 mm.


- Output signal: AC voltage
- Output / input ratio: 1,000 mV / A AC, 10 mV / A AC
- Output: lead and isolated Ø 4 mm male plugs

 

Manufacturer: Chauvin Arnoux GmbH
Test Instruments manufacturer
Order no.: SLT-TRM-ICA
The decibel meter SLT-TRM-ICA consists of a measuring microphone with handle, a wall bracket with 1.5 m / 4.9 ft cable, and a sound transmitter. The main field of application of this noise measuring device SLT-TRM-ICA lies in the continuous sound measurement and sound monitoring of factory buildings, production areas and major events. 

- Measuring range: 30 ... 130 dB in three ranges
- Resolution: 0.1 dB
- Relay output and control output
- Handle and wall holder
- Analog output signal
- Incl. ISO calibration
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: SLT-TRM-ICA
The noise meter SLT-TRM-ICA consists of a measuring microphone with handle, a wall bracket with 1.5 m / 4.9 ft cable, and a sound transmitter. The main field of application of this noise measuring device SLT-TRM-ICA lies in the continuous sound measurement and sound monitoring of factory buildings, production areas and major events. 

- Measuring range: 30 ... 130 dB in three ranges
- Resolution: 0.1 dB
- Relay output and control output
- Handle and wall holder
- Analog output signal
- Incl. ISO calibration
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: SLT-TRM-ICA
The sound level meter SLT-TRM-ICA consists of a microphone with handle, a wall bracket with 1.5 m / 4.9 ft cable, and a sound transmitter. The main application area of this sound level meter SLT-TRM-ICA lies in continuous noise monitoring of factory sites, production lines, as well as in major events such as auto racing and festivals. 

- Measuring range: 30 ... 130 dB in three ranges
- Resolution: 0.1 dB
- Relay output and control output
- Handle and wall holder
- Analog output signal
- Incl. ISO calibration
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: SLT-TRM-ICA
The SPL meter SLT-TRM-ICA consists of a measuring microphone with handle, a wall bracket with 1.5 m / 4.9 ft cable, and a sound transmitter. The main field of application of this noise measuring device SLT-TRM-ICA lies in the continuous sound measurement and sound monitoring of factory buildings, production areas and major events. 

- Measuring range: 30 ... 130 dB in three ranges
- Resolution: 0.1 dB
- Relay output and control output
- Handle and wall holder
- Analog output signal
- Incl. ISO calibration
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-172-ICA

The PCE-172 environmental meter is used for accurate measuring of brightness in the industrial sector, commercial sector, agricultural sector, and for research.


- Range: 40 ... 400,000 lux
- Accuracy: ± 5% of reading ± 10 digits (10,000 lux)
- 3.5-digit LCD display
- Incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-172-ICA

The PCE-172 environmental tester is used for accurate measuring of brightness in the industrial sector, commercial sector, agricultural sector, and for research.


- Range: 40 ... 400,000 lux
- Accuracy: ± 5% of reading ± 10 digits (10,000 lux)
- 3.5-digit LCD display
- Incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-172-ICA

The PCE-172 illuminometer is used for accurate measuring of brightness in the industrial sector, commercial sector, agricultural sector, and for research.


- Range: 40 ... 400,000 lux
- Accuracy: ± 5% of reading ± 10 digits (10,000 lux)
- 3.5-digit LCD display
- Incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-172-ICA

The PCE-172 Light Meter is used for accurate measuring of brightness in the industrial sector, commercial sector, agricultural sector, and for research.


- Range: 40 ... 400,000 lux
- Accuracy: ± 5% of reading ± 10 digits (10,000 lux)
- 3.5-digit LCD display
- Incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-172-ICA

The PCE-172 Lux Meter is used for accurate measuring of brightness in the industrial sector, commercial sector, agricultural sector, and for research.


- Range: 40 ... 400,000 lux
- Accuracy: ± 5% of reading ± 10 digits (10,000 lux)
- 3.5-digit LCD display
- Incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VA 11-ICA

The Air and Temperature Meter PCE-VA 11 is a useful and versatile device for measuring air speeds, air temperature and infrared temperature. Thanks to the fast response time of the device, real-time measurement is possible without problems. The large display provides an accurate overview of the measured values.


- Air speed range: 0.4 ... 30 m/s / 0.9 ... 67 mph
- Air flow range: 0 ... 9999 CFM / CMM
- Air temperature range: -10 ... 60°C / 14 ... 140°F
- IR temperature range: -50 ... 500°C / -58 ... 932°F
- USB interface
- Incl. ISO Calibration Certificate 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VA 11-ICA

The Air Flow Meter PCE-VA 11 is a useful and versatile device for measuring air speeds, air temperature and infrared temperature. Thanks to the fast response time of the device, real-time measurement is possible without problems. The large display provides an accurate overview of the measured values.


- Air speed range: 0.4 ... 30 m/s / 0.9 ... 67 mph
- Air flow range: 0 ... 9999 CFM / CMM
- Air temperature range: -10 ... 60°C / 14 ... 140°F
- IR temperature range: -50 ... 500°C / -58 ... 932°F
- USB interface
- Incl. ISO Calibration Certificate 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VA 11-ICA

The Air Velocity Meter PCE-VA 11 is a useful and versatile device for measuring air speeds, air temperature and infrared temperature. Thanks to the fast response time of the device, real-time measurement is possible without problems. The large display provides an accurate overview of the measured values.


- Air speed range: 0.4 ... 30 m/s / 0.9 ... 67 mph
- Air flow range: 0 ... 9999 CFM / CMM
- Air temperature range: -10 ... 60°C / 14 ... 140°F
- IR temperature range: -50 ... 500°C / -58 ... 932°F
- USB interface
- Incl. ISO Calibration Certificate 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-T 238-ICA
The condition monitoring tachometer PCE-T 238 is a battery-powered hand-held device that allows mobile use. The condition monitoring tachometer can perform a contact measurement as well as a non-contact measurement. It is also possible to perform a measurement of the surface velocity. The condition monitoring tachometer allows a measurement of up to 99,999 revolutions per minute. This measuring range is possible with contactless measurements with the optical tachometer.

- Continuous data output
- Contactless measurement range: 5 ... 99,999 RPM
- Contact measurement range: 0.5 ... 19,999 RPM
- Surface measurement range: 0.05 ... 1,999.9 m/min
- Measuring distance without contact: 5 ... 150 cm / 1.9" ... 4.9 ft
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-EP 150P2

The robust counting scales is a real all-rounder. The stand of the counting scales can be easily separated along with the tripod mount from the platform and possibly sunk into the workbench. The cable between the platform and the display has a plug attached and is about 1.6 m long.


- Weighing range: 60/150 kg
- Readability: 10/20 g
- P2 - weighing surface: 500 x 600 mm
- Removable tripod
- Calibrateable

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-EP 30P2

The robust counting scales is a real all-rounder. The stand of the counting scales can be easily separated along with the tripod mount from the platform and possibly sunk into the workbench. The cable between the platform and the display has a plug attached and is about 1.6 m long.


- Weighing range: 15/30 kg
- Readability: 2/5 g
- P2 - weighing surface: 500 x 600 mm
- Removable tripod
- Calibrateable

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VA 11-ICA

The Flow Meter PCE-VA 11 is a useful and versatile device for measuring air speeds, air temperature and infrared temperature. Thanks to the fast response time of the device, real-time measurement is possible without problems. The large display provides an accurate overview of the measured values.


- Air speed range: 0.4 ... 30 m/s / 0.9 ... 67 mph
- Air flow range: 0 ... 9999 CFM / CMM
- Air temperature range: -10 ... 60°C / 14 ... 140°F
- IR temperature range: -50 ... 500°C / -58 ... 932°F
- USB interface
- Incl. ISO Calibration Certificate 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-T 238-ICA
The handheld tachometer PCE-T 238 is a battery-powered device that allows mobile use. The handheld tachometer can perform a contact measurement as well as a non-contact measurement. It is also possible to perform a measurement of the surface velocity. The handheld tachometer allows a measurement of up to 99,999 revolutions per minute. This measuring range is possible with contactless measurements with the optical tachometer.

- Continuous data output
- Contactless measurement range: 5 ... 99,999 RPM
- Contact measurement range: 0.5 ... 19,999 RPM
- Surface measurement range: 0.05 ... 1,999.9 m/min
- Measuring distance without contact: 5 ... 150 cm / 1.9" ... 4.9 ft
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-EP 150P2

The robust industrial scale is a real all-rounder. The stand of the industrial scale can be easily separated along with the tripod mount from the platform and possibly sunk into the workbench. The cable between the platform and the display has a plug attached and is about 1.6 m long.


- Weighing range: 60/150 kg
- Readability: 10/20 g
- P2 - weighing surface: 500 x 600 mm
- Removable tripod
- Calibrateable

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-EP 30P2

The robust industrial scale is a real all-rounder. The stand of the industrial scale can be easily separated along with the tripod mount from the platform and possibly sunk into the workbench. The cable between the platform and the display has a plug attached and is about 1.6 m long.


- Weighing range: 15/30 kg
- Readability: 2/5 g
- P2 - weighing surface: 500 x 600 mm
- Removable tripod
- Calibrateable

Manufacturer: PCE Instruments
Test Instruments manufacturer