Order no.: PCE-P05-ICA
PCE-P05 is a portable handheld digital differential pressure manometer used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-P05 displays min / max / average values right on the meter's screen for comparison against current measurement values.
- -0.344 to 0.344 bar (-5.000 to 5.000 psi) measuring range
- 11 measurement units: bar, mmHg, ozin², kgcm², psi, inH2O, kPa, ftH2O, inHg, cmH2O, mbar
- Features real-time data-logging capabilities using the included PC software and USB cable
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Order no.: PCE-P01-ICA
PCE-P01 is a portable handheld digital differential pressure meter used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-P01 displays min / max / average values right on the meter's screen for comparison against current measurement values.
- -0.137 to 0.137 bar (-2.000 to 2.000 psi) measuring range
- 11 measurement units: bar, mmHg, ozin², kgcm², psi, inH2O, kPa, ftH2O, inHg, cmH2O, mbar
- Features real-time data-logging capabilities using the included PC software and USB cable
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Order no.: PCE-P05-ICA
PCE-P05 is a portable handheld digital differential pressure meter or manometer used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-P05 displays min / max / average values right on the meter's screen for comparison against current measurement values.
- -0.344 to 0.344 bar (-5.000 to 5.000 psi) measuring range
- 11 measurement units: bar, mmHg, ozin², kgcm², psi, inH2O, kPa, ftH2O, inHg, cmH2O, mbar
- Features real-time data-logging capabilities using the included PC software and USB cable
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Order no.: PCE-FM 500N
The PCE-FM 500N dynamometer is a microprocessor controlled dynamometer with fast and accurate readout of tensile and compressive forces in N, Kg and lb. The display of the force gauge is easily readable by the large numbers. The force gauge is equipped with an internal load cell for tensile and compression tests.
- Measuring range: 0 ... 500 N / 0 ... 112 lbs
- Resolution: 0.1 N / 0.02 lbs
- Differently shaped measuring adapter
- Evaluation via USB interface
- Device for mounting on test stands
Manufacturer: PCE Instruments
Order no.: PCE-FM 500N
The PCE-FM 500N force gauge is a microprocessor controlled dynamometer with fast and accurate readout of tensile and compressive forces in N, Kg and lb. The display of the force gauge is easily readable by the large numbers. The force gauge is equipped with an internal load cell for tensile and compression tests.
- Measuring range: 0 ... 500 N / 0 ... 112 lbs
- Resolution: 0.1 N / 0.02 lbs
- Differently shaped measuring adapter
- Evaluation via USB interface
- Device for mounting on test stands
Manufacturer: PCE Instruments
Order no.: PCE-P01-ICA
PCE-P01 is a portable handheld digital HVAC meter used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-P01 displays min / max / average values right on the meter's screen for comparison against current measurement values.
- -0.137 to 0.137 bar (-2.000 to 2.000 psi) measuring range
- 11 measurement units: bar, mmHg, ozin², kgcm², psi, inH2O, kPa, ftH2O, inHg, cmH2O, mbar
- Features real-time data-logging capabilities using the included PC software and USB cable
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Order no.: PCE-P05-ICA
PCE-P05 is a portable handheld digital HVAC meter or differential pressure manometer used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-P05 displays min / max / average values right on the meter's screen for comparison against current measurement values.
- 0.001 to 0.344 bar (0.001 to 5.000 psi) measuring range
- 11 measurement units: bar, mmHg, ozin², kgcm², psi, inH2O, kPa, ftH2O, inHg, cmH2O, mbar
- Features real-time data-logging capabilities using the included PC software and USB cable
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Order no.: PCE-XXM 20
The material tester PCE-XXM 20 is used to quickly measure the color of surfaces. The material tester has a highly sensitive RGB photodiode as a color sensor.
The measurement of the color with the material tester PCE-XXM 20 takes place in the LAB color space.
- Color spaces: CIE LAB, CIE XYZ, RGB,
CMYK, Pantone
- Wavelength colour sensor: 400 ... 720 nm
- Interface: Micro-USB / Bluetooth
- Sensor: RGB Photodiode
- "Meterbox Lab" App (Playstore) (Android)
- "Meterbox Lab" App (App Store) (IOS)
Manufacturer: PCE Instruments
Order no.: PCE-ND30
The one phase power meter PCE-ND30 can be used to measure 54 parameters in a UI network. In addition to the performance measurement of the power indicator PCE-ND30, it can detect voltage, current, and harmonics up to the 51st order. The power display can be used as 1 or 3 phase. It does not matter if the connected load is balanced or unbalanced.
- Measurement of all parameters of a U/I network
- Harmonics measurement up to 51st order
- 2 x PT100 Input Optional
- RS485 Modbus
Note: This item must be configured before ordering!
Manufacturer: PCE Instruments
Order no.: PCE-ND30
The power display PCE-ND30 can be used to measure 54 parameters in a UI network. In addition to the performance measurement of the power meter PCE-ND30, it can detect voltage, current, and harmonics up to the 51st order. The power indicator can be used as 1 or 3 phase. It does not matter if the connected load is balanced or unbalanced.
- Measurement of all parameters of a U/I network
- Harmonics measurement up to 51st order
- 2 x PT100 Input Optional
- RS485 Modbus
Note: This item must be configured before ordering!
Manufacturer: PCE Instruments
Order no.: PCE-ND30
The power indicator PCE-ND30 can be used to measure 54 parameters in a UI network. In addition to the performance measurement of the power indicator PCE-ND30, it can detect voltage, current, and harmonics up to the 51st order. The power display can be used as 1 or 3 phase. It does not matter if the connected load is balanced or unbalanced.
- Measurement of all parameters of a U/I network
- Harmonics measurement up to 51st order
- 2 x PT100 Input Optional
- RS485 Modbus
Note: This item must be configured before ordering!
Catalogue: Control Systems / Indicator
Manufacturer: PCE Instruments
Order no.: PCE-ND30
The power meter PCE-ND30 can be used to measure 54 parameters in a UI network. In addition to the performance measurement of the power indicator PCE-ND30, it can detect voltage, current, and harmonics up to the 51st order. The power display can be used as 1 or 3 phase. It does not matter if the connected load is balanced or unbalanced.
- Measurement of all parameters of a U/I network
- Harmonics measurement up to 51st order
- 2 x PT100 Input Optional
- RS485 Modbus
Note: This item must be configured before ordering!
Manufacturer: PCE Instruments
Order no.: PCE-P01-ICA
PCE-P01 is a portable handheld digital differential pressure meter used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-P01 displays min / max / average values right on the meter's screen for comparison against current measurement values.
- -0.137 to 0.137 bar (-2.000 to 2.000 psi) measuring range
- 11 measurement units: bar, mmHg, ozin², kgcm², psi, inH2O, kPa, ftH2O, inHg, cmH2O, mbar
- Features real-time data-logging capabilities using the included PC software and USB cable
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Order no.: PCE-P05-ICA
PCE-P05 is a portable handheld digital differential pressure meter or manometer used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-P05 displays min / max / average values right on the meter's screen for comparison against current measurement values.
- -0.344 to 0.344 bar (-5.000 to 5.000 psi) measuring range
- 11 measurement units: bar, mmHg, ozin², kgcm², psi, inH2O, kPa, ftH2O, inHg, cmH2O, mbar
- Features real-time data-logging capabilities using the included PC software and USB cable
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Order no.: PCE-XXM 20
The spectrophotometer PCE-XXM 20 is used to quickly measure the color of surfaces. The spectrophotometer has a highly sensitive RGB photodiode as a color sensor.
The measurement of the color with the spectrophotometer PCE-XXM 20 takes place in the LAB color space.
- Color spaces: CIE LAB, CIE XYZ, RGB,
CMYK, Pantone
- Wavelength colour sensor: 400 ... 720 nm
- Interface: Micro-USB / Bluetooth
- Sensor: RGB Photodiode
- "Meterbox Lab" App (Playstore) (Android)
- "Meterbox Lab" App (App Store) (IOS)
Manufacturer: PCE Instruments
Order no.: PCE-XXM 20
The surface tester PCE-XXM 20 is used to quickly measure the color of surfaces. The surface tester has a highly sensitive RGB photodiode as a color sensor.
The measurement of the color with the surface tester PCE-XXM 20 takes place in the LAB color space.
- Color spaces: CIE LAB, CIE XYZ, RGB,
CMYK, Pantone
- Wavelength colour sensor: 400 ... 720 nm
- Interface: Micro-USB / Bluetooth
- Sensor: RGB Photodiode
- "Meterbox Lab" App (Playstore) (Android)
- "Meterbox Lab" App (App Store) (IOS)
Manufacturer: PCE Instruments
Order no.: PCE-RE100P
The universal temperature controller is used for temperature and process control. The various inputs and outputs, which are installed as standard on the PID controller, make it possible for the PID controller to be used universally.
Measurement functions:
- Process flow
- mV
- Process voltage
- Resistance
- Autotune PID
- Memory for several PID parameters
- RS485 Modbus interface
Manufacturer: PCE Instruments
Order no.: PCE-ND30
The three phase power meter PCE-ND30 can be used to measure 54 parameters in a UI network. In addition to the performance measurement of the power indicator PCE-ND30, it can detect voltage, current, and harmonics up to the 51st order. The power display can be used as 1 or 3 phase. It does not matter if the connected load is balanced or unbalanced.
- Measurement of all parameters of a U/I network
- Harmonics measurement up to 51st order
- 2 x PT100 Input Optional
- RS485 Modbus
Note: This item must be configured before ordering!
Manufacturer: PCE Instruments
Order no.: PCE-RE100P
The universal input controller is used for temperature and process control. The various inputs and outputs, which are installed as standard on the PID controller, make it possible for the PID controller to be used universally.
Measurement functions:
- Process flow
- mV
- Process voltage
- Resistance
- Autotune PID
- Memory for several PID parameters
- RS485 Modbus interface
Manufacturer: PCE Instruments
Order no.: CA-MN73
Clamp on Tester for multimeters, oscilloscopes and current faults, max. 200 A AC, max. Diameter 20 mm. The Clamp on Tester MN series offers 3 choices for the output. In addition to AC and AC voltage, a DC voltage output is possible from the Clamp on Tester. The test instrument is sent out manufacturer calibrated - a certification according to ISO standards is available optionally.
- Output signal: AC voltage
- Output / input ratio: 1,000 mV / A AC, 10 mV / A AC
- Output: lead and isolated Ø 4 mm male plugs
Manufacturer: Chauvin Arnoux GmbH