Earth Tester / Earth Resistance Meter PCE-ET 5000
£ 2,559.00
Price excl. VAT &. delivery
2 year Warranty
The earth tester / earth resistance meter is a versatile ohmmeter. With this earth tester / earth resistance meter a variety of resistance measurements can be performed. Thus, with the earth tester / earth resistance meter, the possibility exists to perform a normal resistance measurement of 2- or 4-pole application.

- Interference currents, interference voltages, frequencies
- Direct and indirect resistance measurement
- Data memory for later analysis on the PC
- Mobile use thanks to battery and batteries
PAT Tester PCE-ET 5000
£ 2,559.00
Price excl. VAT &. delivery
2 year Warranty
The PAT Tester is a versatile ohmmeter. With this earth tester / earth resistance meter a variety of resistance measurements can be performed. Thus, with the PAT Tester, the possibility exists to perform a normal resistance measurement of 2- or 4-pole application.

- Interference currents, interference voltages, frequencies
- Direct and indirect resistance measurement
- Data memory for later analysis on the PC
- Mobile use thanks to battery and batteries
Clamp Meter PCE-830-1-ICA incl. ISO Calibration Certificate
£ 2,554.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The PCE-830 Clamp Meter is used for measuring one to three phases of electrical quantities for alternating current (AC). This 3-Phase Clamp Meter also measures such parameters as voltage, current, frequency, harmonics and power as well as indicating, according to standard EN50160, harmonic values, interharmonics and asymmetrics. Interference, such as interruptions, leaks, overloads or transience (from 16µs) are detected with their corresponding values.


- PCE-830 + PCE-6801 amp clamp (100 A)
- Electrical conductor pick-up: 30 mm diameter
- Range selection: manual (1 A, 10 A, 100 A)
- Clamp dimensions: 210 x 62 x 36 mm
- Incl. ISO calibration certificate

Clamp Meter PCE-830-3-ICA incl. ISO Calibration Certificate
£ 2,554.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The PCE-830-3 Clamp Meter is used for measuring one to three phases of electrical quantities for alternating current (AC). This Clamp Meter also measures such parameters as voltage, current, frequency, harmonics and power as well as indicating, according to standard EN50160, harmonic values, interharmonics and asymmetrics. Interference, such as interruptions, leaks, overloads or transience (from 16µs) are detected with their corresponding values.


- PCE-830 + PCE-3007 flexible amp clamp (3000A)
- Electrical conductor pick-up: 170 mm / 6.7 in diameter
- Minimum radial curve: 35 mm / 1.4 in
- Length of electrical conductor: 610 mm / 24 in
- Sampling rate: 2 sec.
- Memory size: 512 kB / max. 52,420 data (1 phase)
- Incl. ISO calibration certificate

Clamp on Tester PCE-830-1-ICA incl. ISO Calibration Certificate
£ 2,554.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The PCE-830 Clamp on Tester is used for measuring one to three phases of electrical quantities for alternating current (AC). This 3-Phase Clamp on Tester also measures such parameters as voltage, current, frequency, harmonics and power as well as indicating, according to standard EN50160, harmonic values, interharmonics and asymmetrics. Interference, such as interruptions, leaks, overloads or transience (from 16µs) are detected with their corresponding values.


- PCE-830 + PCE-6801 amp clamp (100 A)
- Electrical conductor pick-up: 30 mm diameter
- Range selection: manual (1 A, 10 A, 100 A)
- Clamp dimensions: 210 x 62 x 36 mm
- Incl. ISO calibration certificate

Clamp on Tester PCE-830-3-ICA incl. ISO Calibration Certificate
£ 2,554.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The PCE-830-3 Clamp on Tester is used for measuring one to three phases of electrical quantities for alternating current (AC). This Clamp on Tester also measures such parameters as voltage, current, frequency, harmonics and power as well as indicating, according to standard EN50160, harmonic values, interharmonics and asymmetrics. Interference, such as interruptions, leaks, overloads or transience (from 16µs) are detected with their corresponding values.


- PCE-830 + PCE-3007 flexible amp clamp (3000A)
- Electrical conductor pick-up: 170 mm / 6.7 in diameter
- Minimum radial curve: 35 mm / 1.4 in
- Length of electrical conductor: 610 mm / 24 in
- Sampling rate: 2 sec.
- Memory size: 512 kB / max. 52,420 data (1 phase)
- Incl. ISO calibration certificate

Counting Scale PCE-SD 300
£ 2,554.00
Price excl. VAT &. delivery
2 year Warranty
Verification for Trade / conformity assessment
The calibrated counting scale is ideal if you do not want to install a platform scale into the ground. Simply set up the counting scale in the hall, fix the counting scale and the access ramp with the fixing plates included in the scope of delivery, connect the control terminal to the socket and you can start weighing.

- Weighing range: 300 kg
- Readability: 0.1 kg
- Calibration included
- Verifiable M III
Counting Scale PCE-SD 600
£ 2,554.00
Price excl. VAT &. delivery
2 year Warranty
Verification for Trade / conformity assessment
The calibrated counting scale is ideal if you do not want to install a platform scale into the ground. Simply set up the counting scale in the hall, fix the counting scale and the access ramp with the fixing plates included in the scope of delivery, connect the control terminal to the socket and you can start weighing.

- Weighing range: 600 kg
- Readability: 0.2 kg
- Calibration included
- Verifiable M III
Current Clamp PCE-830-1-ICA incl. ISO Calibration Certificate
£ 2,554.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The PCE-830 Current Clamp is used for measuring one to three phases of electrical quantities for alternating current (AC). This 3-Phase Current Clamp also measures such parameters as voltage, current, frequency, harmonics and power as well as indicating, according to standard EN50160, harmonic values, interharmonics and asymmetrics. Interference, such as interruptions, leaks, overloads or transience (from 16µs) are detected with their corresponding values.


- PCE-830 + PCE-6801 amp clamp (100 A)
- Electrical conductor pick-up: 30 mm diameter
- Range selection: manual (1 A, 10 A, 100 A)
- Clamp dimensions: 210 x 62 x 36 mm
- Incl. ISO calibration certificate

Current Clamp PCE-830-3-ICA incl. ISO Calibration Certificate
£ 2,554.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The PCE-830-3 Current Clamp is used for measuring one to three phases of electrical quantities for alternating current (AC). This Current Clamp also measures such parameters as voltage, current, frequency, harmonics and power as well as indicating, according to standard EN50160, harmonic values, interharmonics and asymmetrics. Interference, such as interruptions, leaks, overloads or transience (from 16µs) are detected with their corresponding values.


- PCE-830 + PCE-3007 flexible amp clamp (3000A)
- Electrical conductor pick-up: 170 mm / 6.7 in diameter
- Minimum radial curve: 35 mm / 1.4 in
- Length of electrical conductor: 610 mm / 24 in
- Sampling rate: 2 sec.
- Memory size: 512 kB / max. 52,420 data (1 phase)
- Incl. ISO calibration certificate

Data Logging Instrument PCE-830-1-ICA incl. ISO Calibration Certificate
£ 2,554.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The PCE-830 Data Logging Instrument is used for measuring one to three phases of electrical quantities for alternating current (AC). This 3-Phase Data Logging Instrument also measures such parameters as voltage, current, frequency, harmonics and power as well as indicating, according to standard EN50160, harmonic values, interharmonics and asymmetrics. Interference, such as interruptions, leaks, overloads or transience (from 16µs) are detected with their corresponding values.


- PCE-830 + PCE-6801 amp clamp (100 A)
- Electrical conductor pick-up: 30 mm diameter
- Range selection: manual (1 A, 10 A, 100 A)
- Clamp dimensions: 210 x 62 x 36 mm
- Incl. ISO calibration certificate

Data Logging Instrument PCE-830-3-ICA incl. ISO Calibration Certificate
£ 2,554.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The PCE-830-3 Data Logging Instrument is used for measuring one to three phases of electrical quantities for alternating current (AC). This Data Logging Instrument also measures such parameters as voltage, current, frequency, harmonics and power as well as indicating, according to standard EN50160, harmonic values, interharmonics and asymmetrics. Interference, such as interruptions, leaks, overloads or transience (from 16µs) are detected with their corresponding values.


- PCE-830 + PCE-3007 flexible amp clamp (3000A)
- Electrical conductor pick-up: 170 mm / 6.7 in diameter
- Minimum radial curve: 35 mm / 1.4 in
- Length of electrical conductor: 610 mm / 24 in
- Sampling rate: 2 sec.
- Memory size: 512 kB / max. 52,420 data (1 phase)
- Incl. ISO calibration certificate

Electrical Tester PCE-830-1-ICA incl. ISO Calibration Certificate
£ 2,554.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The Electrical Tester is used for measuring one to three phases of electrical quantities for alternating current (AC). This 3-Phase Electrical Tester also measures such parameters as voltage, current, frequency, harmonics and power as well as indicating, according to standard EN50160, harmonic values, interharmonics and asymmetrics. Interference, such as interruptions, leaks, overloads or transience (from 16µs) are detected with their corresponding values.


- PCE-830 + PCE-6801 amp clamp (100 A)
- Electrical conductor pick-up: 30 mm diameter
- Range selection: manual (1 A, 10 A, 100 A)
- Clamp dimensions: 210 x 62 x 36 mm
- Incl. ISO calibration certificate

Electrical Tester PCE-830-3-ICA incl. ISO Calibration Certificate
£ 2,554.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The Electrical Tester is used for measuring one to three phases of electrical quantities for alternating current (AC). This Electrical Tester also measures such parameters as voltage, current, frequency, harmonics and power as well as indicating, according to standard EN50160, harmonic values, interharmonics and asymmetrics. Interference, such as interruptions, leaks, overloads or transience (from 16µs) are detected with their corresponding values.


- PCE-830 + PCE-3007 flexible amp clamp (3000A)
- Electrical conductor pick-up: 170 mm / 6.7 in diameter
- Minimum radial curve: 35 mm / 1.4 in
- Length of electrical conductor: 610 mm / 24 in
- Sampling rate: 2 sec.
- Memory size: 512 kB / max. 52,420 data (1 phase)
- Incl. ISO calibration certificate

Floor Scale PCE-SD 300
£ 2,554.00
Price excl. VAT &. delivery
2 year Warranty
Verification for Trade / conformity assessment
The calibrated floor scale is ideal if you do not want to install a platform scale into the ground. Simply set up the floor scale in the hall, fix the platform scale and the access ramp with the fixing plates included in the scope of delivery, connect the control terminal to the socket and you can start weighing.

- Weighing range: 300 kg
- Readability: 0.1 kg
- Calibration included
- Verifiable M III
Floor Scale PCE-SD 600
£ 2,554.00
Price excl. VAT &. delivery
2 year Warranty
Verification for Trade / conformity assessment
The calibrated floor scale is ideal if you do not want to install a platform scale into the ground. Simply set up the floor scale in the hall, fix the floor scale and the access ramp with the fixing plates included in the scope of delivery, connect the control terminal to the socket and you can start weighing.

- Weighing range: 600 kg
- Readability: 0.2 kg
- Calibration included
- Verifiable M III
HVACR Tester PCE-830-1-ICA incl. ISO Calibration Certificate
£ 2,554.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The HVACR Tester is used for measuring one to three phases of electrical quantities for alternating current (AC). This 3-Phase HVACR Tester also measures such parameters as voltage, current, frequency, harmonics and power as well as indicating, according to standard EN50160, harmonic values, interharmonics and asymmetrics. Interference, such as interruptions, leaks, overloads or transience (from 16µs) are detected with their corresponding values.


- PCE-830 + PCE-6801 amp clamp (100 A)
- Electrical conductor pick-up: 30 mm diameter
- Range selection: manual (1 A, 10 A, 100 A)
- Clamp dimensions: 210 x 62 x 36 mm
- Incl. ISO calibration certificate

HVACR Tester PCE-830-3-ICA incl. ISO Calibration Certificate
£ 2,554.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The HVACR Tester is used for measuring one to three phases of electrical quantities for alternating current (AC). This HVACR Tester also measures such parameters as voltage, current, frequency, harmonics and power as well as indicating, according to standard EN50160, harmonic values, interharmonics and asymmetrics. Interference, such as interruptions, leaks, overloads or transience (from 16µs) are detected with their corresponding values.


- PCE-830 + PCE-3007 flexible amp clamp (3000A)
- Electrical conductor pick-up: 170 mm / 6.7 in diameter
- Minimum radial curve: 35 mm / 1.4 in
- Length of electrical conductor: 610 mm / 24 in
- Sampling rate: 2 sec.
- Memory size: 512 kB / max. 52,420 data (1 phase)
- Incl. ISO calibration certificate