The ultrasonic flow meter is required as part of a control measurement or to quickly determine the flow in a pipeline and is therefore a portable / easy-to-install measuring system. The ultrasonic flow meter works according to the transit time difference method. The measuring principle of the ultrasonic flow meter is quite simple. 

 

- Measuring range: -32 ... 32 m/s, -105 ... 105 ft/s
- Resolution: 0.0001 m/s, 0.00033 ft/s
- Pipe size: DN 15 … 100, 20 … 108 mm (approx. 3/4 ... 4")
- Pipe size: DN 50 … 700, 57 … 720 mm (approx. 2 … 28")
- Sensor temperature range: 0 ... 160°C / 32 ... 320°F
- Sensor installation: V, (N,W)
- Incl. sensors TDS-M1, TDS-S1
- Incl. evaluation software
- Incl. 2-channel temperature datalogger
- Incl. ISO Calibration Certificates

The ultrasonic flow meter is required as part of a control measurement or to quickly determine the flow in a pipeline and is therefore a portable / easy-to-install measuring system. The ultrasonic flow meter works according to the transit time difference method. The measuring principle of the ultrasonic flow meter is quite simple. 

 

- Measuring range: -32 ... 32 m/s, -105 ... 105 ft/s
- Resolution: 0.0001 m/s, 0.00033 ft/s
- Pipe size: DN 15 … 100, 20 … 108 mm (approx. 3/4 ... 4")
- Pipe size: DN 50 … 700, 57 … 720 mm (approx. 2 … 28")
- Sensor temperature range: 0 ... 160°C / 32 ... 320°F
- Sensor installation: V, (N,W)
- Incl. sensors TDS-M1, TDS-S1
- Incl. evaluation software
- Incl. 2-channel temperature datalogger
- Incl. ISO Calibration Certificates

The ultrasonic flow tester is required as part of a control measurement or to quickly determine the flow in a pipeline and is therefore a portable / easy-to-install measuring system. The ultrasonic flow tester works according to the transit time difference method. The measuring principle of the ultrasonic flow tester is quite simple. 

 

- Measuring range: -32 ... 32 m/s, -105 ... 105 ft/s
- Resolution: 0.0001 m/s, 0.00033 ft/s
- Pipe size: DN 15 … 100, 20 … 108 mm (approx. 3/4 ... 4")
- Pipe size: DN 50 … 700, 57 … 720 mm (approx. 2 … 28")
- Sensor temperature range: 0 ... 160°C / 32 ... 320°F
- Sensor installation: V, (N,W)
- Incl. sensors TDS-M1, TDS-S1
- Incl. evaluation software
- Incl. 2-channel temperature datalogger
- Incl. ISO Calibration Certificates

The PCE-DDM 50WI Crane Scale is the ideal tool for weighing big loads and for measuring strong tensile forces. The PCE-DDM 50WI Crane Scale is delivered in a protective carrying case and includes two shackles made of heavy-duty steel. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.

- Measurement range: 50,000 kg / 500 kN / 110,231 lbs
- Resolution: 20 kg / 200 N
- Units of measurement: kg / t / lbs / N / kN
- Supplied without remote control indicator

The dynamometer is ideal for mobile tensile measurements, such as those carried out by surveyors. Quality materials are used in the manufacture of the tension dynamometer. Despite the high measuring capacity, these materials enable a compact design with a low weight.

- Measurement range: 50,000 kg / 500 kN / 110,231 lb
- Resolution: 20 kg / 200 N / 44 lb
- Minimum load: 400 kg / 881 lb
- Supplied without remote control indicator

The PCE-DDM 50WI Force Gauge is the ideal tool for weighing big loads and for measuring strong tensile forces. The PCE-DDM 50WI Force Gauge is delivered in a protective carrying case and includes two shackles made of heavy-duty steel. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.

- Measurement range: 50,000 kg / 500 kN / 110,231 lbs
- Resolution: 20 kg / 200 N
- Units of measurement: kg / t / lbs / N / kN
- Supplied without remote control indicator

The PCE-DDM 50WI Hanging Scales are the ideal tool for weighing big loads and for measuring strong tensile forces. The hanging scales are delivered in a protective carrying case and includes two shackles made of heavy-duty steel. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.

- Measurement range: 50,000 kg / 500 kN / 110,231 lbs
- Resolution: 20 kg / 200 N
- Units of measurement: kg / t / lbs / N / kN
- Supplied without remote control indicator

The tension load cell is ideal for mobile tensile measurements, such as those carried out by surveyors. Quality materials are used in the manufacture of the tension load cell. Despite the high measuring capacity, these materials enable a compact design with a low weight.

- Measurement range: 50,000 kg / 500 kN / 110,231 lb
- Resolution: 20 kg / 200 N / 44 lb
- Minimum load: 400 kg / 881 lb
- Supplied without remote control indicator

The PCE-DDM 50WI weighing hook is the ideal tool for weighing big loads and for measuring strong tensile forces. The PCE-DDM 50WI weighing hook is delivered in a protective carrying case and includes two shackles made of heavy-duty steel. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.

- Measurement range: 50,000 kg / 500 kN / 110,231 lbs
- Resolution: 20 kg / 200 N
- Units of measurement: kg / t / lbs / N / kN
- Supplied without remote control indicator

- Weighing range : 3000 kg
- Readability : 1 kg
- Calibration included
- Calibratable M III

- Weighing range : 3000 kg
- Readability : 1 kg
- Calibration included
- Calibratable M III

- Weighing range : 3000 kg
- Readability : 1 kg
- Calibration included
- Calibratable M III

- Weighing range : 3000 kg
- Readability : 1 kg
- Calibration included
- Calibratable M III

- Weighing range : 3000 kg
- Readability : 1 kg
- Calibration included
- Calibratable M III

- Weighing range : 3000 kg
- Readability : 1 kg
- Calibration included
- Calibratable M III

- Weighing range : 3000 kg
- Readability : 1 kg
- Calibration included
- Calibratable M III

- Weighing range : 3000 kg
- Readability : 1 kg
- Calibration included
- Calibratable M III

- Weighing range : 3000 kg
- Readability : 1 kg
- Calibration included
- Calibratable M III

- Weighing range : 3000 kg
- Readability : 1 kg
- Calibration included
- Calibratable M III

PCE-AS1 is an air sampling meter used to assess microbiological pollution and monitor hygiene. Designed for use in hospitals, clean rooms, food, beverage, cosmetics, and pharmaceutical production facilities. The PCE-AS1 air sampler meets the latest requirements for devices used for airborne microbial analysis of bacterial and fungal counts. Rate is 100 lpm or 3.53 cfm with 300 micropores. **Optional ISO lab calibration listed under accessories**

- Accommodates manual adjustment of air volumes from 10 to 6000 liters
- Offers data storage for up to 99 parameters / 2000 measurement records
- Aids in compliance with HACCP, FDA FMSA, USP 797 and ISO 14698-1
- Runs off a rechargeable battery or AC power
- Supports standard Petri dishes of 90 mm / 3.5 in