Industrial Measurement Products and Solutions
Order no.: PCE-BSK 310
The analytical balance scale is a scale for daily laboratory use. Another function besides the normal measurement function of the analytical balance scale is the piece counting function. This function allows the analytical balance scale to determine the number of screws, for example. 

- Measuring range: 0 ... 310 g
- Resolution: 0.001 g
- Piece counting function
- RS-232 interface
- External calibration
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-BSK 310
The benchtop scale is a scale for daily laboratory use. Another function besides the normal measurement function of the benchtop scale is the piece counting function. This function allows the benchtop scale to determine the number of screws, for example. 

- Measuring range: 0 ... 310 g
- Resolution: 0.001 g
- Piece counting function
- RS-232 interface
- External calibration
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-BSK 310
The counting scale is a scale for daily laboratory use. Another function besides the normal measurement function of the counting scale is the piece counting function. This function allows the counting scale to determine the number of screws, for example. 

- Measuring range: 0 ... 310 g
- Resolution: 0.001 g
- Piece counting function
- RS-232 interface
- External calibration
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-ITM 20
This digital multimeter PCE-ITM 20 combines a versatile multimeter with an insulation tester. In addition to the usual measured quantities such as voltage, current and resistance, this digital multimeter PCE-ITM 20 is also equipped with a frequency and capacitance measurement.

- Automatic range selection
- Capacitance measurement
- Integrated isolation tester
- Internal memory
- To IEC 1010, CAT III 1000V, CAT IV 600V
- Frequency measurement
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-ITM 20
This digital electrical tester PCE-ITM 20 combines a versatile multimeter with an insulation tester. In addition to the usual measured quantities such as voltage, current and resistance, this digital electrical tester PCE-ITM 20 is also equipped with a frequency and capacitance measurement.

- Automatic range selection
- Capacitance measurement
- Integrated isolation tester
- Internal memory
- To IEC 1010, CAT III 1000V, CAT IV 600V
- Frequency measurement
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-ITM 20
This Insulation Tester PCE-ITM 20 combines a versatile multimeter with an insulation tester. In addition to the usual measured quantities such as voltage, current and resistance, this insulation tester PCE-ITM 20 is also equipped with a frequency and capacitance measurement.

- Automatic range selection
- Capacitance measurement
- Integrated isolation tester
- Internal memory
- To IEC 1010, CAT III 1000V, CAT IV 600V
- Frequency measurement
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-ITM 20
This isolation meter PCE-ITM 20 combines a versatile multimeter with an insulation tester. In addition to the usual measured quantities such as voltage, current and resistance, this isolation meter PCE-ITM 20 is also equipped with a frequency and capacitance measurement.

- Automatic range selection
- Capacitance measurement
- Integrated isolation tester
- Internal memory
- To IEC 1010, CAT III 1000 V, CAT IV 600 V
- Frequency measurement
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-BSK 310
The laboratory balance scale is a scale for daily laboratory use. Another function besides the normal measurement function of the laboratory balance scale is the piece counting function. This function allows the laboratory balance scale to determine the number of screws, for example. 

- Measuring range: 0 ... 310 g
- Resolution: 0.001 g
- Piece counting function
- RS-232 interface
- External calibration
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-BSK 310
The laboratory scale is a scale for daily laboratory use. Another function besides the normal measurement function of the laboratory scale is the piece counting function. This function allows the laboratory scale to determine the number of screws, for example. 

- Measuring range: 0 ... 310 g
- Resolution: 0.001 g
- Piece counting function
- RS-232 interface
- External calibration
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-BSK 310
The precision balance scale is a scale for daily laboratory use. Another function besides the normal measurement function of the precision balance scale is the piece counting function. This function allows the precision balance scale to determine the number of screws, for example. 

- Measuring range: 0 ... 310 g
- Resolution: 0.001 g
- Piece counting function
- RS-232 interface
- External calibration
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-BSK 310
The tabletop scale is a scale for daily laboratory use. Another function besides the normal measurement function of the tabletop scale is the piece counting function. This function allows the tabletop scale to determine the number of screws, for example. 

- Measuring range: 0 ... 310 g
- Resolution: 0.001 g
- Piece counting function
- RS-232 interface
- External calibration
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: CA-C103

The Clamp on Tester from the C1XX series for multimeters has a diameter of 52 mm (2.0 in), maximum 1000 A AC, and is designed for power and harmonics measurement. The Clamp on Tester can be connected via 4 mm (0.2 in) safety plugs to a multimeter. It is also possible to connect the Clamp on Tester via the 4 mm (0.2 mm) sockets or the BNC connector to a data acquisition system. The test instrument comes manufacturer calibrated. As all instruments, it can be certified to ISO as an option.
- Measuring range: 0.1 A ... 1000 A
- Transformer Ratio: 1000 / 1
- Connection: 4 mm / 0.2 in male plugs

Manufacturer: Chauvin Arnoux GmbH
Test Instruments manufacturer
Order no.: CA-C103

The Current Clamp from the C1XX series for multimeters has a diameter of 52 mm (2.0 in), maximum 1000 A AC, and is designed for power and harmonics measurement. The Current Clamp can be connected via 4 mm (0.2 in) safety plugs to a multimeter. It is also possible to connect the Current Clamp via the 4 mm (0.2 mm) sockets or the BNC connector to a data acquisition system. The test instrument comes manufacturer calibrated. As all instruments, it can be certified to ISO as an option.
- Measuring range: 0.1 A ... 1000 A
- Transformer Ratio: 1000 / 1
- Connection: 4 mm / 0.2 in male plugs

Manufacturer: Chauvin Arnoux GmbH
Test Instruments manufacturer
Order no.: PCE-S 42

The automotive-testing mechanics stethoscope PCE-S 42 is designed for listening to individual machine parts. The industrial stethoscope is used to perform maintenance and repair work. The use of an industrial stethoscope thus facilitates the interception of acoustic phenomena on bearings and motors to prevent failures.


- Frequency range: 30 Hz ... 15 KHz
- For preventative maintenance and servicing
- Sound suppressing headphones included
- Easy operation
- Headphones, 70 mm long sensor, 280 mm long sensor, battery, carrying case

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-330

PCE-330 is a climate meter with a quick-response sensor for determining ambient temperature, relative humidity and dew point temperature. Equipped with an easy-to-read dual display, this multifunction data-logging indoor air quality (IAQ) meter features a large internal memory with storage for up to 16,000 recorded values.


- Temperature range: -20 ... 60°C / -4 ... 140°F
- Relative humidity range: 0 ... 100% RH
- Resolution: 0.1° / 0.18°F
- Accuracy: ± 0.8°C / ± 1.5°F, ± 2.0 ... 4.0% RH

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HT 420
The climate meter records humidity and air temperature and stores it internally. This compact and robust climate meter in mini format and with a large memory (up to a maximum of 32,000 values ​​/ 16,000 values ​​per parameter) is mainly used for long-term registration (refrigerated counters in department stores, refrigerated transport, warehouses, PC climate chambers).

- Temperature: -40 ... 70°C / -40 ... 158°F
- Humidity: 0 ... 100%
- Dew point calculation (accuracy ± 2°C / 3.6°F)
- Operating temperature: -40 ... 80°C / -40 ... 176°F, max. 80% rF
- Datalogger for temperature and humidity
- LCD display
- E-mail when value is exceeded
- Ethernet
- Power supply or PoE (selectable)
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PH 25
The conductivity meter PCE-PH 25 offers the user comprehensive measuring applications. In addition to determining the pH value, the PCE-PH 25 conductivity meter also shows the conductivity, the filtrate dry residue, the salinity and the temperature of the sample. The conductivity meter PCE-PH 25 is a measuring instrument for mobile use.

- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Accuracy: ± 0.01 pH
- Measurement data memory for 50 data sets
- Self-calibration possible
- Display of salinity and conductivity
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HT 420
The datalogger records humidity and air temperature and stores it internally. This compact and robust datalogger in mini format and with a large memory (up to a maximum of 32,000 values ​​/ 16,000 values ​​per parameter) is mainly used for long-term registration (refrigerated counters in department stores, refrigerated transport, warehouses, PC climate chambers).

- Temperature: -40 ... 70°C / -40 ... 158°F
- Humidity: 0 ... 100%
- Dew point calculation (accuracy ± 2°C / 3.6°F)
- Operating temperature: -40 ... 80°C / -40 ... 176°F, max. 80% rF
- Datalogger for temperature and humidity
- LCD display
- E-mail when value is exceeded
- Ethernet
- Power supply or PoE (selectable)
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HT 420
The dew point thermometer records humidity and air temperature and stores it internally. This compact and robust dew point thermometer in mini format and with a large memory (up to a maximum of 32,000 values ​​/ 16,000 values ​​per parameter) is mainly used for long-term registration (refrigerated counters in department stores, refrigerated transport, warehouses, PC climate chambers).

- Temperature: -40 ... 70°C / -40 ... 158°F
- Humidity: 0 ... 100%
- Dew point calculation (accuracy ± 2°C / 3.6°F)
- Operating temperature: -40 ... 80°C / -40 ... 176°F, max. 80% rF
- Datalogger for temperature and humidity
- LCD display
- E-mail when value is exceeded
- Ethernet
- Power supply or PoE (selectable)
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-228LIQ
The environmental meter PCE-228LIQ is a very easy-to-use pH / mV / °C / °F handheld instrument. The pH value and the temperature can be stored directly on the SD card (Excel file) or transferred directly from the environmental meter to a PC via the RS-232 interface. You can buy the environmental meter PCE-228LIQ here in our shop.

- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Accuracy: ± (0.02 pH + 2d)
- Memory: flexible via SD card memory 1 ... 16 GB
- Interface: RS -232
- Especially for beer, blood, and dairy products
Manufacturer: PCE Instruments
Test Instruments manufacturer