Order no.: PCE-THB 38-ICA

The PCE-THB 38 environmental meter is ideal for detecting and digitally displaying humidity, temperature and barometric pressure. Temperature is measured by an RTD sensor and air humidity is measured by a highly repeatable, capacitive sensor. All products are test instruments, and the environmental meter is sent out manufacturer calibrated. An ISO certification is available optionally.


- Temperature: 0 ... 50°C / 32 ... 122°F
- Relative air humidity: 10 ... 95% r.h.
- Barometric pressure: 10 ... 1100 hPa (mbar) / 0.14 psi ... 16 psi.
- Dew point temperature: -25 ... 49°C / -13 ... 120°F
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-THB 38-ICA

The PCE-THB 38 environmental tester is ideal for detecting and digitally displaying humidity, temperature and barometric pressure. Temperature is measured by an RTD sensor and air humidity is measured by a highly repeatable, capacitive sensor. All products are test instruments, and the environmental tester is sent out manufacturer calibrated. An ISO certification is available optionally.


- Temperature: 0 ... 50°C / 32 ... 122°F
- Relative air humidity: 10 ... 95% r.h.
- Barometric pressure: 10 ... 1100 hPa (mbar) / 0.14 psi ... 16 psi.
- Dew point temperature: -25 ... 49°C / -13 ... 120°F
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-THB 38-ICA

The PCE-THB 38 humidity detector is ideal for detecting and digitally displaying humidity, temperature and barometric pressure. Temperature is measured by an RTD sensor and air humidity is measured by a highly repeatable, capacitive sensor. All products are test instruments, and the humidity detector is sent out manufacturer calibrated. An ISO certification is available optionally.


- Temperature: 0 ... 50°C / 32 ... 122°F
- Relative air humidity: 10 ... 95% r.h.
- Barometric pressure: 10 ... 1100 hPa (mbar) / 0.14 psi ... 16 psi.
- Dew point temperature: -25 ... 49°C / -13 ... 120°F
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-THB 38-ICA

The PCE-THB 38 HVAC meter is ideal for detecting and digitally displaying humidity, temperature and barometric pressure. Temperature is measured by an RTD sensor and air humidity is measured by a highly repeatable, capacitive sensor. All products are test instruments, and the HVAC meter is sent out manufacturer calibrated. An ISO certification is available optionally.


- Temperature: 0 ... 50°C / 32 ... 122°F
- Relative air humidity: 10 ... 95% r.h.
- Barometric pressure: 10 ... 1100 hPa (mbar) / 0.14 psi ... 16 psi.
- Dew point temperature: -25 ... 49°C / -13 ... 120°F
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-THB 38-ICA

The PCE-THB 38 Hygrometer is ideal for detecting and digitally displaying humidity, temperature and barometric pressure. Temperature is measured by an RTD sensor and air humidity is measured by a highly repeatable, capacitive sensor. All products are test instruments, and the Hygrometer is sent out manufacturer calibrated. An ISO certification is available optionally.


- Temperature: 0 ... 50°C / 32 ... 122°F
- Relative air humidity: 10 ... 95% r.h.
- Barometric pressure: 10 ... 1100 hPa (mbar) / 0.14 psi ... 16 psi.
- Dew point temperature: -25 ... 49°C / -13 ... 120°F
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: CAL-GS
Re-calibration for GammaScout series
Test Instruments manufacturer
Order no.: PCE-THB 38-ICA

The PCE-THB 38 relative humidity meter is ideal for detecting and digitally displaying humidity, temperature and barometric pressure. Temperature is measured by an RTD sensor and air humidity is measured by a highly repeatable, capacitive sensor. All products are test instruments, and the relative humidity meter is sent out manufacturer calibrated. An ISO certification is available optionally.


- Temperature: 0 ... 50°C / 32 ... 122°F
- Relative air humidity: 10 ... 95% r.h.
- Barometric pressure: 10 ... 1100 hPa (mbar) / 0.14 psi ... 16 psi.
- Dew point temperature: -25 ... 49°C / -13 ... 120°F
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-THB 38-ICA

The PCE-THB 38 temperature meter is ideal for detecting and digitally displaying humidity, temperature and barometric pressure. Temperature is measured by an RTD sensor and air humidity is measured by a highly repeatable, capacitive sensor. All products are test instruments, and the temperature meter is sent out manufacturer calibrated. An ISO certification is available optionally.


- Temperature: 0 ... 50°C / 32 ... 122°F
- Relative air humidity: 10 ... 95% r.h.
- Barometric pressure: 10 ... 1100 hPa (mbar) / 0.14 psi ... 16 psi.
- Dew point temperature: -25 ... 49°C / -13 ... 120°F
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-007

Air flow meter with port, memory, software for wind speed, temperature and air flow. These test instruments are calibrated by the manufacturer. An ISO calibration certificate is available as an option.

- Speed measurement up to 45 m/s or 100 mph
- Wind speed: 0.01 m/s, accuracy ±3% ±0.1
- Air temperature: 0.2°C / 32.4°F, accuracy ±1°C / 33.8°F
- Air flow: 0.001 to 100, accuracy calculated from the wind speed and surface

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-007

This air flow meter is very economical. With this air flow meter you can measure wind speed and air temperature. Once you have the right cross section, the air flow meter will show the air flow. All the test instruments come manufacturer calibrated. ISO certification can be made as an option.

 

- Speed measurement up to 45 m/s or 100 mph
- Wind speed: 0.01 m/s, accuracy ±3% ±0.1
- Air temperature: 0.2°C / 32.4°F, accuracy ±1°C / 33.8°F
- Air flow: 0.001 to 100, accuracy calculated from the wind speed and surface

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-007

This Data Logger meter is very economical. With this Data Logger meter you can measure wind speed and air temperature. These test instruments are calibrated by the manufacturer. An ISO calibration certificate is available as an option.

- Speed measurement up to 45 m/s or 100 mph
- Wind speed: 0.01 m/s, accuracy ±3% ±0.1
- Air temperature: 0.2°C / 32.4°F, accuracy ±1°C / 33.8°F
- Air flow: 0.001 to 100, accuracy calculated from the wind speed and surface

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-007

This Air velocity meter is very economical. With this air flow meter you can measure wind speed and air temperature. Once you have the right cross section, the Air velocity meter will show the air flow. All the test instruments come manufacturer calibrated. ISO certification can be made as an option.

- Speed measurement up to 45 m/s or 100 mph
- Wind speed: 0.01 m/s, accuracy ±3% ±0.1
- Air temperature: 0.2°C / 32.4°F, accuracy ±1°C / 33.8°F
- Air flow: 0.001 to 100, accuracy calculated from the wind speed and surface

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-007

Airwheel wind measurer with port, memory, software for wind speed, temperature and air flow. These test instruments are calibrated by the manufacturer. An ISO calibration certificate is available as an option.

- Speed measurement up to 45 m/s or 100 mph
- Wind speed: 0.01 m/s, accuracy ±3% ±0.1
- Air temperature: 0.2°C / 32.4°F, accuracy ±1°C / 33.8°F
- Air flow: 0.001 to 100, accuracy calculated from the wind speed and surface

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-007

Anemometer with port, memory, software for wind speed, temperature and air flow. All the test instruments come manufacturer calibrated. ISO certification can be made as an option.

- Speed measurement up to 45 m/s or 100 mph
- Wind speed: 0.01 m/s, accuracy ±3% ±0.1
- Air temperature: 0.2°C / 32.4°F, accuracy ±1°C / 33.8°F
- Air flow: 0.001 to 100, accuracy calculated from the wind speed and surface

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PCS 6

PCE-PCS 6 is a Benchtop scale or balance with accurate weighing and piece or part counting functions. Ideal for use in laboratory, office, inventory and miscellaneous industrial applications, this portable Benchtop scale can be powered by battery or by the included electric power supply. The scale's built-in RS-232 port enables data transfer and printing.


- Weight range: 0.1 ... 6000 g / 6 kg (metric only)
- Readability: 0.1 g
- Repeatability: ± 0.1 g
- TARE range: 100 %
- Memory positions for reference weight: 99

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PCS 6

PCE-PCS 6 is a checkweighing scale or balance with accurate weighing and piece or part counting functions. Ideal for use in laboratory, office, inventory and miscellaneous industrial applications, this portable scale can be powered by battery or by the included electric power supply. The scale's built-in RS-232 port enables data transfer and printing.


- Weight range: 0.1 ... 6000 g / 6 kg (metric only)
- Readability: 0.1 g
- Repeatability: ± 0.1 g
- TARE range: 100 %
- Memory positions for reference weight: 99

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DC 41-ICA

The Clamp Meter PCE-DC 41 can measure voltages up to 600 V, currents up to 600 A and electrical resistance up to 1000 Ω. To perform a measurement, you can either use the measuring leads, which are included in the package of the digital clamp meter, or you can use the integrated clamp mechanism. By using the clamp of the digital clamp meter, you are able to measure the electrical parameters of an electrical conductor contact-free and without disconnecting it.


- Voltage: 600 V AC/DC
- Current: 600 A AC/DC
- Electrical Resistance: 1000 Ω
- Clamp mechanism
- Incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DC 41-ICA

The clamp on tester PCE-DC 41 can measure voltages up to 600 V, currents up to 600 A and electrical resistance up to 1000 Ω. To perform a measurement, you can either use the measuring leads, which are included in the package of the clamp on tester, or you can use the integrated clamp mechanism. By using the clamp of the clamp on tester, you are able to measure the electrical parameters of an electrical conductor contact-free and without disconnecting it.


- Voltage: 600 V AC/DC
- Current: 600 A AC/DC
- Electrical Resistance: 1000 Ω
- Clamp mechanism
- Incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 5000H

PCE-CT 5000H is a coating thickness measuring instrument used for the rapid determination of coating thicknesses on ferrous (Type F) and non-ferrous (Type N) metals. The coating thickness gauge automatically detects the type of metal to be measured.


- Type F measuring range: 0 ... 5000 µm / 0 ... 5 mm / 0 ... 196 mils
- Type N measuring range: 0 ... 3000 µm / 0 ... 3 mm / 0 ... 118 mils
- Displays measuring units in μm, mm or mils
- Saves up to 2000 measurements to internal memory
- Practical V-groove on the measuring head

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PCS 6

PCE-PCS 6 is a compact scale or balance with accurate weighing and piece or part counting functions. Ideal for use in laboratory, office, inventory and miscellaneous industrial applications, this portable scale can be powered by battery or by the included electric power supply. The scale's built-in RS-232 port enables data transfer and printing.


- Weight range: 0.1 ... 6000 g / 6 kg (metric only)
- Readability: 0.1 g
- Repeatability: ± 0.1 g
- TARE range: 100 %
- Memory positions for reference weight: 99


Manufacturer: PCE Instruments
Test Instruments manufacturer