Industrial Measurement Products and Solutions
Order no.: CA-MN71

Clamp on Tester for multimeters, oscilloscopes and current faults, max. 200 A AC, max. Diameter 20 mm. The Clamp on Tester MN series offers 3 choices for the output. In addition to AC and AC voltage, a DC voltage output is possible from the Clamp on Tester. The test instrument is sent out manufacturer calibrated - a certification according to ISO standards is available optionally.


- Rated current: 10 A AC
- Output signal: AC voltage
- Output / input ratio: 100 mV / A AC
- Output: lead and isolated Ø 4 mm male plugs

 

Manufacturer: Chauvin Arnoux GmbH
Test Instruments manufacturer
Order no.: CA-MN71

Current Clamp for multimeters, oscilloscopes and current faults, max. 200 A AC, max. diameter 20 mm.


- Rated current: 10 A AC
- Output signal: AC voltage
- Output / input ratio: 100 mV / A AC
- Output: lead and isolated Ø 4 mm male plugs

 

Manufacturer: Chauvin Arnoux GmbH
Test Instruments manufacturer
Order no.: PT-PRBDPM-B
Internal sensor for air temperature and humidity
Test Instruments manufacturer
Order no.: PCE-CT 26FN-ICA
The PCE-CT 26FN automotive tester can measure non-destructive coatings (paints, plastics ...) on steel / iron and non-ferrous metals. The PCE-CT 26FN automotive tester is ideally suited to immediately detect, for example, accident damage to the vehicle. 

- Measuring range: 0 ... 1250 μm
- Resolution: 1 μm
- Accuracy: ± (3% + 2 μm)
- Wear-resistant sensor
- V-groove for measurement on pipes
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-BSW 3
The benchtop scale PCE-BSW 3 is an ideal companion for mobile use. Thanks to this second indicator on the benchtop scale, several viewers can follow a weighing process and analyze it.

- Measuring range: 0 ... 3000 g / 0 ... 6.6 lbs
- Resolution: 0.1 g
- Large contact surface of 235 x 190 mm / 9.3 x 7.5 in
- Different measuring ranges
- Battery operation for mobile use
- Front and back display
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-BSW 3
The checkweighing scale PCE-BSW 3 is an ideal companion for mobile use. Thanks to this second indicator on the checkweighing scale, several viewers can follow a weighing process and analyze it.

- Measuring range: 0 ... 3000 g / 0 ... 6.6 lbs
- Resolution: 0.1 g
- Large contact surface of 235 x 190 mm / 9.3 x 7.5 in
- Different measuring ranges
- Battery operation for mobile use
- Front and back display
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 26FN-ICA
The PCE-CT 26FN coating thickness gauge can measure non-destructive coatings (paints, plastics ...) on steel / iron and non-ferrous metals. The PCE-CT 26FN coating thickness gauge is ideally suited to immediately detect, for example, accident damage to the vehicle. 

- Measuring range: 0 ... 1250 μm
- Resolution: 1 μm
- Accuracy: ± (3% + 2 μm)
- Wear-resistant sensor
- V-groove for measurement on pipes
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-BSW 3
The counting scale PCE-BSW 3 is an ideal companion for mobile use. Thanks to this second indicator on the counting scale, several viewers can follow a weighing process and analyze it.

- Measuring range: 0 ... 3000 g / 0 ... 6.6 lbs
- Resolution: 0.1 g
- Large contact surface of 235 x 190 mm / 9.3 x 7.5 in
- Different measuring ranges
- Battery operation for mobile use
- Front and back display
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-BSW 3
The industrial scale PCE-BSW 3 is an ideal companion for mobile use. Thanks to this second indicator on the industrial scale, several viewers can follow a weighing process and analyze it.

- Measuring range: 0 ... 3000 g / 0 ... 6.6 lbs
- Resolution: 0.1 g
- Large contact surface of 235 x 190 mm / 9.3 x 7.5 in
- Different measuring ranges
- Battery operation for mobile use
- Front and back display
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-BSW 3
The inventory scale PCE-BSW 3 is an ideal companion for mobile use. Thanks to this second indicator on the inventory scale, several viewers can follow a weighing process and analyze it.

- Measuring range: 0 ... 3000 g / 0 ... 6.6 lbs
- Resolution: 0.1 g
- Large contact surface of 235 x 190 mm / 9.3 x 7.5 in
- Different measuring ranges
- Battery operation for mobile use
- Front and back display
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-BSW 3
The laboratory balance PCE-BSW 3 is an ideal companion for mobile use. Thanks to this second indicator on the laboratory balance, several viewers can follow a weighing process and analyze it.

- Measuring range: 0 ... 3000 g / 0 ... 6.6 lbs
- Resolution: 0.1 g
- Large contact surface of 235 x 190 mm / 9.3 x 7.5 in
- Different measuring ranges
- Battery operation for mobile use
- Front and back display
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-BSW 3
The laboratory scale PCE-BSW 3 is an ideal companion for mobile use. Thanks to this second indicator on the laboratory scale, several viewers can follow a weighing process and analyze it.

- Measuring range: 0 ... 3000 g / 0 ... 6.6 lbs
- Resolution: 0.1 g
- Large contact surface of 235 x 190 mm / 9.3 x 7.5 in
- Different measuring ranges
- Battery operation for mobile use
- Front and back display
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 26FN-ICA
The PCE-CT 26FN material tester can measure non-destructive coatings (paints, plastics ...) on steel / iron and non-ferrous metals. The PCE-CT 26FN material tester is ideally suited to immediately detect, for example, accident damage to the vehicle. 

- Measuring range: 0 ... 1250 μm
- Resolution: 1 μm
- Accuracy: ± (3% + 2 μm)
- Wear-resistant sensor
- V-groove for measurement on pipes
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 26FN-ICA
The PCE-CT 26FN material thickness meter can measure non-destructive coatings (paints, plastics ...) on steel / iron and non-ferrous metals. The PCE-CT 26FN material thickness meter is ideally suited to immediately detect, for example, accident damage to the vehicle. 

- Measuring range: 0 ... 1250 μm
- Resolution: 1 μm
- Accuracy: ± (3% + 2 μm)
- Wear-resistant sensor
- V-groove for measurement on pipes
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 26FN-ICA
The PCE-CT 26FN NDT tester can measure non-destructive coatings (paints, plastics ...) on steel / iron and non-ferrous metals. The PCE-CT 26FN NDT tester is ideally suited to immediately detect, for example, accident damage to the vehicle. 

- Measuring range: 0 ... 1250 μm
- Resolution: 1 μm
- Accuracy: ± (3% + 2 μm)
- Wear-resistant sensor
- V-groove for measurement on pipes
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 26FN-ICA
The PCE-CT 26FN paint thickness gauge can measure non-destructive coatings (paints, plastics ...) on steel / iron and non-ferrous metals. The PCE-CT 26FN paint thickness gauge is ideally suited to immediately detect, for example, accident damage to the vehicle. 

- Measuring range: 0 ... 1250 μm
- Resolution: 1 μm
- Accuracy: ± (3% + 2 μm)
- Wear-resistant sensor
- V-groove for measurement on pipes
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-BSW 3
The precision balance PCE-BSW 3 is an ideal companion for mobile use. Thanks to this second indicator on the precision balance, several viewers can follow a weighing process and analyze it.

- Measuring range: 0 ... 3000 g / 0 ... 6.6 lbs
- Resolution: 0.1 g
- Large contact surface of 235 x 190 mm / 9.3 x 7.5 in
- Different measuring ranges
- Battery operation for mobile use
- Front and back display
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 26FN-ICA
The PCE-CT 26FN surface testing - coating thickness gauge can measure non-destructive coatings (paints, plastics ...) on steel / iron and non-ferrous metals. The PCE-CT 26FN surface testing - coating thickness gauge is ideally suited to immediately detect, for example, accident damage to the vehicle. 

- Measuring range: 0 ... 1250 μm
- Resolution: 1 μm
- Accuracy: ± (3% + 2 μm)
- Wear-resistant sensor
- V-groove for measurement on pipes
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-BSW 3
The tabletop scale PCE-BSW 3 is an ideal companion for mobile use. Thanks to this second indicator on the tabletop scale, several viewers can follow a weighing process and analyze it.

- Measuring range: 0 ... 3000 g / 0 ... 6.6 lbs
- Resolution: 0.1 g
- Large contact surface of 235 x 190 mm / 9.3 x 7.5 in
- Different measuring ranges
- Battery operation for mobile use
- Front and back display
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 26FN-ICA
The PCE-CT 26FN thickness gauge can measure non-destructive coatings (paints, plastics ...) on steel / iron and non-ferrous metals. The PCE-CT 26FN thickness gauge is ideally suited to immediately detect, for example, accident damage to the vehicle. 

- Measuring range: 0 ... 1250 μm
- Resolution: 1 μm
- Accuracy: ± (3% + 2 μm)
- Wear-resistant sensor
- V-groove for measurement on pipes
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer