Industrial Measurement Products and Solutions
Order no.: KWG2

Basic air flow meter for monitoring tasks. Ideal measuring transducers for basic requirements and appropriate for cost effective solutions.


- Output: 0 … 10 V
- Measurement reading range: 0.9 … 40 m/s
- Accuracy: ± 0.5 m/s or 5 % v. M

Manufacturer: Adolf Thies GmbH & Co. KG
Test Instruments manufacturer
Order no.: KWG2

Basic wind transmitter for monitoring tasks. Ideal measuring transducers for basic requirements and appropriate for cost effective solutions.


- Output: 0 … 10 V
- Measurement reading range: 0.9 … 40 m/s
- Accuracy: ± 0.5 m/s or 5 % v. M

 

Manufacturer: Adolf Thies GmbH & Co. KG
Test Instruments manufacturer
Order no.: CA-C100

The Clamp on Tester from the C1XX series for multimeters has a diameter of 52 mm (2.0 in), maximum 1000 A AC, and is designed for power and harmonics measurement. The Clamp on Tester can be connected via 4 mm (0.2 in) safety plugs to a multimeter. It is also possible to connect the Clamp on Tester via the 4 mm (0.2 mm) sockets or the BNC connector to a data acquisition system. The test instrument comes manufacturer calibrated. As all instruments, it can be certified to ISO as an option.
- Measuring range: 0.1 A ... 1000 A
- Transformer Ratio: 1000 / 1
- Connection: 4 mm / 0.2 in socket

Manufacturer: Chauvin Arnoux GmbH
Test Instruments manufacturer
Order no.: CA-C100

The Current Clamp from the C1XX series for multimeters has a diameter of 52 mm (2.0 in), maximum 1000 A AC, and is designed for power and harmonics measurement. The Current Clamp can be connected via 4 mm (0.2 in) safety plugs to a multimeter. It is also possible to connect the Current Clamp via the 4 mm (0.2 mm) sockets or the BNC connector to a data acquisition system. The test instrument comes manufacturer calibrated. As all instruments, it can be certified to ISO as an option.
- Measuring range: 0.1 A ... 1000 A
- Transformer Ratio: 1000 / 1
- Connection: 4 mm / 0.2 in socket

Manufacturer: Chauvin Arnoux GmbH
Test Instruments manufacturer
Order no.: KWG2

Basic wind transmitter for monitoring tasks. Ideal measuring transducers for basic requirements and appropriate for cost effective solutions.


- Output: 0 … 10 V
- Measurement reading range: 0.9 … 40 m/s
- Accuracy: ± 0.5 m/s or 5 % v. M

 

Manufacturer: Adolf Thies GmbH & Co. KG
Test Instruments manufacturer
Order no.: KWG2

Basic wind speed meter for monitoring tasks. Ideal measuring transducers for basic requirements and appropriate for cost effective solutions.


- Output: 0 … 10 V
- Measurement reading range: 0.9 … 40 m/s
- Accuracy: ± 0.5 m/s or 5 % v. M

 

Manufacturer: Adolf Thies GmbH & Co. KG
Test Instruments manufacturer
Order no.: CAL-GS
Re-calibration for GammaScout series
Test Instruments manufacturer
Order no.: PCE-007

Air flow meter with port, memory, software for wind speed, temperature and air flow. These test instruments are calibrated by the manufacturer. An ISO calibration certificate is available as an option.

- Speed measurement up to 45 m/s or 100 mph
- Wind speed: 0.01 m/s, accuracy ±3% ±0.1
- Air temperature: 0.2°C / 32.4°F, accuracy ±1°C / 33.8°F
- Air flow: 0.001 to 100, accuracy calculated from the wind speed and surface

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-007

This air flow meter is very economical. With this air flow meter you can measure wind speed and air temperature. Once you have the right cross section, the air flow meter will show the air flow. All the test instruments come manufacturer calibrated. ISO certification can be made as an option.

 

- Speed measurement up to 45 m/s or 100 mph
- Wind speed: 0.01 m/s, accuracy ±3% ±0.1
- Air temperature: 0.2°C / 32.4°F, accuracy ±1°C / 33.8°F
- Air flow: 0.001 to 100, accuracy calculated from the wind speed and surface

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-007

This Data Logger meter is very economical. With this Data Logger meter you can measure wind speed and air temperature. These test instruments are calibrated by the manufacturer. An ISO calibration certificate is available as an option.

- Speed measurement up to 45 m/s or 100 mph
- Wind speed: 0.01 m/s, accuracy ±3% ±0.1
- Air temperature: 0.2°C / 32.4°F, accuracy ±1°C / 33.8°F
- Air flow: 0.001 to 100, accuracy calculated from the wind speed and surface

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-007

This Air velocity meter is very economical. With this air flow meter you can measure wind speed and air temperature. Once you have the right cross section, the Air velocity meter will show the air flow. All the test instruments come manufacturer calibrated. ISO certification can be made as an option.

- Speed measurement up to 45 m/s or 100 mph
- Wind speed: 0.01 m/s, accuracy ±3% ±0.1
- Air temperature: 0.2°C / 32.4°F, accuracy ±1°C / 33.8°F
- Air flow: 0.001 to 100, accuracy calculated from the wind speed and surface

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-007

Airwheel wind measurer with port, memory, software for wind speed, temperature and air flow. These test instruments are calibrated by the manufacturer. An ISO calibration certificate is available as an option.

- Speed measurement up to 45 m/s or 100 mph
- Wind speed: 0.01 m/s, accuracy ±3% ±0.1
- Air temperature: 0.2°C / 32.4°F, accuracy ±1°C / 33.8°F
- Air flow: 0.001 to 100, accuracy calculated from the wind speed and surface

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-007

Anemometer with port, memory, software for wind speed, temperature and air flow. All the test instruments come manufacturer calibrated. ISO certification can be made as an option.

- Speed measurement up to 45 m/s or 100 mph
- Wind speed: 0.01 m/s, accuracy ±3% ±0.1
- Air temperature: 0.2°C / 32.4°F, accuracy ±1°C / 33.8°F
- Air flow: 0.001 to 100, accuracy calculated from the wind speed and surface

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-N50B
The built-in display has a RS485 Modbus interface. This digital Modbus built-in display can display the measured data of up to 10 slave devices or registers. 

- Interface: RS 485 Modbus RTU Master
- Number of slave devices / registers: 10
- Baud rate individually adjustable
- Further power supply area
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PCS 6

PCE-PCS 6 is a checkweighing scale or balance with accurate weighing and piece or part counting functions. Ideal for use in laboratory, office, inventory and miscellaneous industrial applications, this portable scale can be powered by battery or by the included electric power supply. The scale's built-in RS-232 port enables data transfer and printing.


- Weight range: 0.1 ... 6000 g / 6 kg (metric only)
- Readability: 0.1 g
- Repeatability: ± 0.1 g
- TARE range: 100 %
- Memory positions for reference weight: 99

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 5000H

PCE-CT 5000H is a coating thickness measuring instrument used for the rapid determination of coating thicknesses on ferrous (Type F) and non-ferrous (Type N) metals. The coating thickness gauge automatically detects the type of metal to be measured.


- Type F measuring range: 0 ... 5000 µm / 0 ... 5 mm / 0 ... 196 mils
- Type N measuring range: 0 ... 3000 µm / 0 ... 3 mm / 0 ... 118 mils
- Displays measuring units in μm, mm or mils
- Saves up to 2000 measurements to internal memory
- Practical V-groove on the measuring head

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PCS 6

PCE-PCS 6 is a compact scale or balance with accurate weighing and piece or part counting functions. Ideal for use in laboratory, office, inventory and miscellaneous industrial applications, this portable scale can be powered by battery or by the included electric power supply. The scale's built-in RS-232 port enables data transfer and printing.


- Weight range: 0.1 ... 6000 g / 6 kg (metric only)
- Readability: 0.1 g
- Repeatability: ± 0.1 g
- TARE range: 100 %
- Memory positions for reference weight: 99


Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SLD 10
The condition monitoring device PCE-SLD 10 is used for permanent monitoring of the sound level. In addition to storing the measured values, the PCE-SLD 10 condition monitoring device is able to display the measured values ​​on a display and output them as a 4 ... 20-mA analog value.

- Measuring range: 30 ... 130 dB
- Measurement accuracy: Based on class 2 according to IEC61672
- Resolution: 0.1 dB
- LC display
- SD card memory up to 16 GB
- external microphone
- Analog output with 4 ... 20-mA
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PCS 6

PCE-PCS 6 is a counting scale or balance with accurate weighing and piece or part counting functions. Ideal for use in laboratory, office, inventory and miscellaneous industrial applications, this portable scale can be powered by battery or by the included electric power supply. The scale's built-in RS-232 port enables data transfer and printing.


- Weight range: 0.1 ... 6000 g / 6 kg (metric only)
- Readability: 0.1 g
- Repeatability: ± 0.1 g
- TARE range: 100 %
- Memory positions for reference weight: 99


Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-EP 150P1

The robust counting scales is a real all-arounder. The stand of the counting scales can be easily separated along with the tripod mount from the platform and possibly sunk into the workbench. The cable between the platform and the display has a plug attached and is about 1.6 m long.


- Weighing range: 60/150 kg
- Readability: 10/20 g
- P1 - weighing surface: 400 x 500 mm
- Removable tripod
- Calibrateable

Manufacturer: PCE Instruments
Test Instruments manufacturer