Industrial Measurement Products and Solutions
Order no.: PCE-432-SC 09
The class 1 decibel meter PCE-432 meets all requirements for noise measurement and frequency analysis. In addition to the sound measurement function, the decibel meter is equipped with a GPS receiver. The GPS function allows the user to assign the measured values ​​to an exact position.

- Accuracy class 1
- GPS function
- A, B, C & Z frequency weighting
- Fast, Slow, Impulse and Peak time weighting
- Statistics function
- 1/1 octave band included
- 1/3 octave band optional
- Incl. Class 1 sound calibrator (for verification only)
Manufacturer: PCE Instruments
£ 2,184.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-432-SC 09
The class 1 noise meter PCE-432 meets all requirements for noise measurement and frequency analysis. In addition to the sound measurement function, the noise meter is equipped with a GPS receiver. The GPS function allows the user to assign the measured values ​​to an exact position.

- Accuracy class 1
- GPS function
- A, B, C & Z frequency weighting
- Fast, Slow, Impulse and Peak time weighting
- Statistics function
- 1/1 octave band included
- 1/3 octave band optional
- Incl. Class 1 sound calibrator (for verification only)
Manufacturer: PCE Instruments
£ 2,184.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-432-SC 09
The class 1 sound level meter PCE-432 meets all requirements for noise measurement and frequency analysis. In addition to the sound measurement function, the sound level meter is equipped with a GPS receiver. The GPS function allows the user to assign the measured values ​​to an exact position.

- Accuracy class 1
- GPS function
- A, B, C & Z frequency weighting
- Fast, Slow, Impulse and Peak time weighting
- Statistics function
- 1/1 octave band included
- 1/3 octave band optional
- Incl. Class 1 sound calibrator (for verification only)
Manufacturer: PCE Instruments
£ 2,184.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-432-SC 09
The class 1 SPL meter PCE-432 meets all requirements for noise measurement and frequency analysis. In addition to the sound measurement function, the SPL meter is equipped with a GPS receiver. The GPS function allows the user to assign the measured values ​​to an exact position.

- Accuracy class 1
- GPS function
- A, B, C & Z frequency weighting
- Fast, Slow, Impulse and Peak time weighting
- Statistics function
- 1/1 octave band included
- 1/3 octave band optional
- Incl. Class 1 sound calibrator (for verification only)
Manufacturer: PCE Instruments
£ 2,184.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-DDM 20-ICA

The PCE-DDM 20 Crane Scale is the ideal tool for weighing big loads and for measuring strong tensile forces. The PCE-DDM 20 Crane Scale is delivered in a protective carrying case and includes two shackles made of heavy-duty steel. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.


- Measurement range: 20,000 kg / 200 kN / 44,092 lbs
- Resolution: 10 kg / 100 N
- Units of measurement: kg / t / lbs / N / kN
- Supplied with remote control indicator
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
£ 2,167.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-DDM 20-ICA
The force gage is ideal for mobile tensile measurements, such as those carried out by surveyors. Quality materials are used in the manufacture of the tension force gage. Despite the high measuring capacity, these materials enable a compact design with a low weight.

- Measurement range: 20,000 kg / 200 kN / 44,092 lb
- Resolution: 10 kg / 100 N / 22 lb
- Minimum load: 200 kg / 440 lb
- Supplied with remote control indicator
- incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
£ 2,167.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-DDM 20-ICA
The force gauge is ideal for mobile tensile measurements, such as those carried out by surveyors. Quality materials are used in the manufacture of the force gauge. Despite the high measuring capacity, these materials enable a compact design with a low weight.

- Measurement range: 20,000 kg / 200 kN / 44,092 lb
- Resolution: 10 kg / 100 N / 22 lb
- Minimum load: 200 kg / 440 lb
- Supplied with remote control indicator
- incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
£ 2,167.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-DDM 20-ICA

The PCE-DDM 20 Hanging Scale is the ideal tool for weighing big loads and for measuring strong tensile forces. The PCE-DDM 20 Hanging Scale is delivered in a protective carrying case and includes two shackles made of heavy-duty steel. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.


- Measurement range: 20,000 kg / 200 kN / 44,092 lbs
- Resolution: 10 kg / 100 N
- Units of measurement: kg / t / lbs / N / kN
- Supplied with remote control indicator
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
£ 2,167.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-DDM 20-ICA
The tension dynamometer is ideal for mobile tensile measurements, such as those carried out by surveyors. Quality materials are used in the manufacture of the tension dynamometer. Despite the high measuring capacity, these materials enable a compact design with a low weight.

- Measurement range: 20,000 kg / 200 kN / 44,092 lb
- Resolution: 10 kg / 100 N / 22 lb
- Minimum load: 200 kg / 440 lb
- Supplied with remote control indicator
- incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
£ 2,167.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-DDM 20-ICA

The PCE-DDM 20 weighing hook is the ideal tool for weighing big loads and for measuring strong tensile forces. The PCE-DDM 20 weighing hook is delivered in a protective carrying case and includes two shackles made of heavy-duty steel. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.


- Measurement range: 20,000 kg / 200 kN / 44,092 lbs
- Resolution: 10 kg / 100 N
- Units of measurement: kg / t / lbs / N / kN
- Supplied with remote control indicator
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
£ 2,167.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-830-1-ICA

The PCE-830 Power Analyzer is used for measuring one to three phases of electrical quantities for alternating current (AC). This 3-Phase Power Analyzer also measures such parameters as voltage, current, frequency, hrmonics and power as well as indicting, according to standard EN50160, harmonic values, interharmonics and asymmetrics. Interference, such as interruptions, leaks, overloads or transience (from 16µs) are detected with their corresponding values.


- PCE-830 + PCE-6801 amp clamp (100 A)
- Electrical conductor pick-up: 30 mm diameter
- Range selection: manual (1 A, 10 A, 100 A)
- Clamp dimensions: 210 x 62 x 36 mm
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
£ 2,149.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-830-3-ICA

The PCE-830-3 Power Analyzer is used for measuring one to three phases of electrical quantities for alternating current (AC). This Power Analyzer also measures such parameters as voltage, current, frequency, harmonics and power as well as indicting, according to standard EN50160, harmonic values, interharmonics and asymmetrics. Interference, such as interruptions, leaks, overloads or transience (from 16µs) are detected with their corresponding values.


- PCE-830 + PCE-3007 flexible amp clamp (3000A)
- Electrical conductor pick-up: 170 mm / 6.7 in diameter
- Minimum radial curve: 35 mm / 1.4 in
- Length of electrical conductor: 610 mm / 24 in
- Sampling rate: 2 sec.
- Memory size: 512 kB / max. 52,420 data (1 phase)
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
£ 2,149.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-830-1-ICA

The PCE-830 Data Logger is used for measuring one to three phases of electrical quantities for alternating current (AC). This 3-Phase Data Logger also measures such parameters as voltage, current, frequency, hrmonics and power as well as indicting, according to standard EN50160, harmonic values, interharmonics and asymmetrics. Interference, such as interruptions, leaks, overloads or transience (from 16µs) are detected with their corresponding values.


- PCE-830 + PCE-6801 amp clamp (100 A)
- Electrical conductor pick-up: 30 mm diameter
- Range selection: manual (1 A, 10 A, 100 A)
- Clamp dimensions: 210 x 62 x 36 mm
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
£ 2,149.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-830-3-ICA

The PCE-830-3 Data Logger is used for measuring one to three phases of electrical quantities for alternating current (AC). This Data Logger also measures such parameters as voltage, current, frequency, harmonics and power as well as indicting, according to standard EN50160, harmonic values, interharmonics and asymmetrics. Interference, such as interruptions, leaks, overloads or transience (from 16µs) are detected with their corresponding values.


- PCE-830 + PCE-3007 flexible amp clamp (3000A)
- Electrical conductor pick-up: 170 mm / 6.7 in diameter
- Minimum radial curve: 35 mm / 1.4 in
- Length of electrical conductor: 610 mm / 24 in
- Sampling rate: 2 sec.
- Memory size: 512 kB / max. 52,420 data (1 phase)
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
£ 2,149.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-830-1-ICA

The PCE-830 Power Meter is used for measuring one to three phases of electrical quantities for alternating current (AC). This 3-Phase Power Meter also measures such parameters as voltage, current, frequency, hrmonics and power as well as indicting, according to standard EN50160, harmonic values, interharmonics and asymmetrics. Interference, such as interruptions, leaks, overloads or transience (from 16µs) are detected with their corresponding values.


- PCE-830 + PCE-6801 amp clamp (100 A)
- Electrical conductor pick-up: 30 mm diameter
- Range selection: manual (1 A, 10 A, 100 A)
- Clamp dimensions: 210 x 62 x 36 mm
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
£ 2,149.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-830-3-ICA

The PCE-830-3 Power Meter is used for measuring one to three phases of electrical quantities for alternating current (AC). This Power Meter also measures such parameters as voltage, current, frequency, harmonics and power as well as indicting, according to standard EN50160, harmonic values, interharmonics and asymmetrics. Interference, such as interruptions, leaks, overloads or transience (from 16µs) are detected with their corresponding values.


- PCE-830 + PCE-3007 flexible amp clamp (3000A)
- Electrical conductor pick-up: 170 mm / 6.7 in diameter
- Minimum radial curve: 35 mm / 1.4 in
- Length of electrical conductor: 610 mm / 24 in
- Sampling rate: 2 sec.
- Memory size: 512 kB / max. 52,420 data (1 phase)
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
£ 2,149.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-830-1-ICA

The PCE-830 Power Analyzer is used for measuring one to three phases of electrical quantities for alternating current (AC). This 3-Phase Power Analyzer also measures such parameters as voltage, current, frequency, hrmonics and power as well as indicting, according to standard EN50160, harmonic values, interharmonics and asymmetrics. Interference, such as interruptions, leaks, overloads or transience (from 16µs) are detected with their corresponding values.


- PCE-830 + PCE-6801 amp clamp (100 A)
- Electrical conductor pick-up: 30 mm diameter
- Range selection: manual (1 A, 10 A, 100 A)
- Clamp dimensions: 210 x 62 x 36 mm
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
£ 2,149.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-830-3-ICA

The PCE-830-3 Power Analyzer is used for measuring one to three phases of electrical quantities for alternating current (AC). This Power Analyzer also measures such parameters as voltage, current, frequency, harmonics and power as well as indicting, according to standard EN50160, harmonic values, interharmonics and asymmetrics. Interference, such as interruptions, leaks, overloads or transience (from 16µs) are detected with their corresponding values.


- PCE-830 + PCE-3007 flexible amp clamp (3000A)
- Electrical conductor pick-up: 170 mm / 6.7 in diameter
- Minimum radial curve: 35 mm / 1.4 in
- Length of electrical conductor: 610 mm / 24 in
- Sampling rate: 2 sec.
- Memory size: 512 kB / max. 52,420 data (1 phase)
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
£ 2,149.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-RVI 2 V1L

PCE-RVI 2 V1L is a rotational viscometer used in industrial and research applications to measure viscosity according to BS, ISO and ASTM standards. Featuring a plug-and-play sensor for temperature control to help ensure accurate test results, this digital viscometer is delivered with spindles L1, L2, L3 and L4 and displays measurements in millipascal-second (mPa.s) or centipoise (cP), depending on the rotational speed and the type of spindle used.


- Rotational speed: 0.3, 0.5, 0.6, 1, 1.5, 2, 2.5, 3, 4, 5, 6, 10, 12, 20, 30, 50, 60,
  100, 200 rpm

- Viscosity range: 3  ... 2,000,000 mPa.s / cP
- Accuracy: ±1 % full scale (FS)

 

Manufacturer: PCE Instruments
£ 2,128.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-RVI 2 V1R

PCE-RVI 2 V1R is a rotational viscometer used in industrial and research applications to measure viscosity according to BS, ISO and ASTM standards. Featuring a plug-and-play sensor for temperature control to help ensure accurate test results, this digital viscometer is delivered with spindles R2, R3, R4, R5, R6 and R7 and displays measurements in millipascal-second (mPa.s) or centipoise (cP), depending on the rotational speed and the type of spindle used.


- Rotational speed: 0.3, 0.5, 0.6, 1, 1.5, 2, 2.5, 3, 4, 5, 6, 10, 12, 20, 30, 50, 60,
  100, 200 rpm

- Viscosity range: 20  ... 13,000,000 mPa.s / cP
- Accuracy: ±1 % full scale (FS)

 

Manufacturer: PCE Instruments
£ 2,128.00

Price excl. VAT &. delivery
2 year Warranty