Industrial Measurement Products and Solutions
Order no.: PCE-DOM 10
The Dissolved Oxygen Meter is a measuring device to determine the oxygen content both in liquids and in the ambient air. With this oxygen meter, water analysis can be carried out on the oxygen content in a very short time and with an integrated temperature sensor, the oxygen meter is able to carry out an automatic temperature compensation.

- Measuring range up to 20 mg / L
- For oxygen analysis
- Temperature compensation up to 50°C / 122°F
- For measurement in liquids and in air
- Exchangeable oxygen sensor
Manufacturer: PCE Instruments
£ 213.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-DOM 10
The environmental meter PCE-DOM 10 is a measuring device to determine the oxygen content both in liquids and in the ambient air. With this environmental meter, water analysis can be carried out on the oxygen content in a very short time and with an integrated temperature sensor, the environmental meter is able to carry out an automatic temperature compensation.

- Measuring range up to 20 mg / L
- For oxygen analysis
- Temperature compensation up to 50°C / 122°F
- For measurement in liquids and in air
- Exchangeable oxygen sensor
Manufacturer: PCE Instruments
£ 213.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-DOM 10
The environmental tester PCE-DOM 10 is a measuring device to determine the oxygen content both in liquids and in the ambient air. With this environmental tester, water analysis can be carried out on the oxygen content in a very short time and with an integrated temperature sensor, the environmental tester is able to carry out an automatic temperature compensation.

- Measuring range up to 20 mg / L
- For oxygen analysis
- Temperature compensation up to 50°C / 122°F
- For measurement in liquids and in air
- Exchangeable oxygen sensor
Manufacturer: PCE Instruments
£ 213.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-DOM 10
The food / hygiene meter PCE-DOM 10 is a measuring device to determine the oxygen content both in liquids and in the ambient air. With this food / hygiene meter, water analysis can be carried out on the oxygen content in a very short time and with an integrated temperature sensor, the food / hygiene meter is able to carry out an automatic temperature compensation.

- Measuring range up to 20 mg / L
- For oxygen analysis
- Temperature compensation up to 50°C / 122°F
- For measurement in liquids and in air
- Exchangeable oxygen sensor
Manufacturer: PCE Instruments
£ 213.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-DOM 10
The oxygen meter PCE-DOM 10 is a measuring device to determine the oxygen content both in liquids and in the ambient air. With this oxygen meter, water analysis can be carried out on the oxygen content in a very short time and with an integrated temperature sensor, the oxygen meter is able to carry out an automatic temperature compensation.

- Measuring range up to 20 mg / L
- For oxygen analysis
- Temperature compensation up to 50°C / 122°F
- For measurement in liquids and in air
- Exchangeable oxygen sensor
Manufacturer: PCE Instruments
£ 213.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-DOM 10
The water analysis meter PCE-DOM 10 is a measuring device to determine the oxygen content both in liquids and in the ambient air. With this water analysis meter, water analysis can be carried out on the oxygen content in a very short time and with an integrated temperature sensor, the water analysis meter is able to carry out an automatic temperature compensation.

- Measuring range up to 20 mg / L
- For oxygen analysis
- Temperature compensation up to 50°C / 122°F
- For measurement in liquids and in air
- Exchangeable oxygen sensor
Manufacturer: PCE Instruments
£ 213.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-DX-AS-ICA

Mechanical shore durometer for measuring hardness of soft elastomer with drag needle. The shore durometer is composed of a single component with a measuring head and a 360º dial. To improve the readability of peak value, the device comes with a drag needle, that ensures the maximum reading can be captured. Once it has been measured, it can be reset to zero. 


- Force of pressure: 0 to 12.5 N
- Penetrating body: 35º (according to Shore A)
- Equipped with drag needle
- Measurement range: 10 ... 90
  (pressure diminishes below 10 and above 90)
- Margin of error: ± 1
- Division of scale: 1
- incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
£ 211.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-DX-AS-ICA

Mechanical shore hardness tester for measuring hardness of soft elastomer with drag needle. The shore hardness tester is composed of a single component with a measuring head and a 360º dial. To improve the readability of peak value, the device comes with a drag needle, that ensures the maximum reading can be captured. Once it has been measured, it can be reset to zero. 


- Force of pressure: 0 to 12.5 N
- Penetrating body: 35º (according to Shore A)
- Equipped with drag needle
- Measurement range: 10 ... 90
  (pressure diminishes below 10 and above 90)
- Margin of error: ± 1
- Division of scale: 1
- incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
£ 211.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-DX-AS-ICA

Mechanical shore hardness tester for measuring hardness of soft elastomer with drag needle. The shore hardness tester is composed of a single component with a measuring head and a 360º dial. To improve the readability of peak value, the device comes with a drag needle, that ensures the maximum reading can be captured. Once it has been measured, it can be reset to zero. 


- Force of pressure: 0 to 12.5 N
- Penetrating body: 35º (according to Shore A)
- Equipped with drag needle
- Measurement range: 10 ... 90
  (pressure diminishes below 10 and above 90)
- Margin of error: ± 1
- Division of scale: 1
- incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
£ 211.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-DC 20-ICA
The AC/DC automotive tester is a versatile measuring instrument for the determination of currents, voltages and many other electrical quantities. With a current clamp opening of 40 mm / 1.6 in, even cables with a larger diameter can be tested with the AC/DC automotive tester.

Measurement functions
- DC current
- AC current
- DC voltage
- AC voltage
- Resistance
- Frequency (direct)
- Frequency (current clamp)
- incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
£ 210.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-DC 20-ICA
The AC/DC car measuring device is a versatile measuring instrument for the determination of currents, voltages and many other electrical quantities. With a current clamp opening of 40 mm / 1.6 in, even cables with a larger diameter can be tested with the AC/DC car measuring device.

Measurement functions
- DC current
- AC current
- DC voltage
- AC voltage
- Resistance
- Frequency (direct)
- Frequency (current clamp)
- incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
£ 210.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-DC 20-ICA
The AC/DC clamp meter is a versatile measuring instrument for the determination of currents, voltages and many other electrical quantities. With a current clamp opening of 40 mm / 1.6 in, even cables with a larger diameter can be tested with the AC/DC clamp meter.

Measurement functions
- DC current
- AC current
- DC voltage
- AC voltage
- Resistance
- Frequency (direct)
- Frequency (current clamp)
- incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
£ 210.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-DC 20-ICA
The AC/DC clamp on tester is a versatile measuring instrument for the determination of currents, voltages and many other electrical quantities. With a current clamp opening of 40 mm / 1.6 in, even cables with a larger diameter can be tested with the AC/DC clamp on tester.

Measurement functions
- DC current
- AC current
- DC voltage
- AC voltage
- Resistance
- Frequency (direct)
- Frequency (current clamp)
- incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
£ 210.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-DC 20-ICA
The AC/DC current clamp is a versatile measuring instrument for the determination of currents, voltages and many other electrical quantities. With a current clamp opening of 40 mm / 1.6 in, even cables with a larger diameter can be tested with the AC/DC current clamp.

Measurement functions
- DC current
- AC current
- DC voltage
- AC voltage
- Resistance
- Frequency (direct)
- Frequency (current clamp)
- incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
£ 210.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-DC 20-ICA
The AC/DC digital multimeter is a versatile measuring instrument for the determination of currents, voltages and many other electrical quantities. With a current clamp opening of 40 mm / 1.6 in, even cables with a larger diameter can be tested with the AC/DC digital multimeter.

Measurement functions
- DC current
- AC current
- DC voltage
- AC voltage
- Resistance
- Frequency (direct)
- Frequency (current clamp)
- incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
£ 210.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-DC 20-ICA
The AC/DC electrical tester is a versatile measuring instrument for the determination of currents, voltages and many other electrical quantities. With a current clamp opening of 40 mm / 1.6 in, even cables with a larger diameter can be tested with the AC/DC electrical tester.

Measurement functions
- DC current
- AC current
- DC voltage
- AC voltage
- Resistance
- Frequency (direct)
- Frequency (current clamp)
- incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
£ 210.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-DC 20-ICA
The AC/DC HVAC meter is a versatile measuring instrument for the determination of currents, voltages and many other electrical quantities. With a current clamp opening of 40 mm / 1.6 in, even cables with a larger diameter can be tested with the AC/DC HVAC meter.

Measurement functions
- DC current
- AC current
- DC voltage
- AC voltage
- Resistance
- Frequency (direct)
- Frequency (current clamp)
- incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
£ 210.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-DC 20-ICA
The AC/DC voltmeter is a versatile measuring instrument for the determination of currents, voltages and many other electrical quantities. With a current clamp opening of 40 mm / 1.6 in, even cables with a larger diameter can be tested with the AC/DC voltmeter.

Measurement functions
- DC current
- AC current
- DC voltage
- AC voltage
- Resistance
- Frequency (direct)
- Frequency (current clamp)
- incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
£ 210.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-GMM 10
The absolute moisture meter PCE-GMM 10 is a compact moisture analyzer for up to 18 different cereals. This material moisture meter is an important tool in mills, granaries or in processing industries of cereals and legumes.

- For 18 cereals
- Small amount of sample
- Temperature compensation: automatic
Manufacturer: PCE Instruments
£ 205.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: 22029L
Sewer leak test set

Bladder seal for pipe diameter 75 ... 150 mm
£ 205.00

Price excl. VAT &. delivery
2 year Warranty