Industrial Measurement Products and Solutions
Order no.: PCE-RVI 5

PCE-RVI 5 is a Krebs viscometer or Stormer viscometer used in industrial and research applications to measure Krebs Unit viscosity according to the ASTM D562, ASTM D1131 and ASTM D856 standards. Featuring a unique automatic test mode for reliable, consistently repeatable and reproducible test results, this Krebs Stormer viscometer displays measurements in Krebs Units (KU), grams (g) and centipoise (cP). Used in the testing, development, manufacture and quality control of paints, coatings, lacquers, varnishes, adhesives, pastes, and liquid inks.


- Rotational speed: 200 rpm
- Viscosity range: 40.2 ... 141.0 KU / 32 ... 1,099 g / 27 ... 5,274 cP (mPa.s)
- Accuracy: ±1 % full scale (FS)

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-3000UL

The UCI hardness tester PCE-3000UL can be used for quickly checking the hardness of components even after installation. The device offers a wide measurement range, easy handling, robust design, and a temperature resistance up to 40 °C (104 °F). Measures hardness in Rockwell, Brinell and Vickers, the UCI hardness tester can test the tensile strength of steels up to 1740 MPa or 70 HRC. The tester comes with two probes, one UCI probe for non-destructive testing and one Leeb probe for rebound testing.

- Non-destructive hardness testing
- Ultrasonic + Leeb hardness test method
- Different hardness scales selectable
- 5 materials testable
- 2 probes for UCI and Leeb rebound testing

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 1500U SST

The stainless steel U-shaped floor scale is a certifiable scale supplied in calibrated form. The dimensions of the stainless steel U-shaped floor scale are tailored to a range of EU sizes.


- Weighing range: 0 ... 1500 kg
- Readability: 0.5 kg
- Calibration value: 0.5 kg
- Verifiable M III
- Stainless steel IP68 - IP65

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 3000U SST
The stainless steel U-shaped floor scale is a certifiable scale supplied in calibrated form. The dimensions of the stainless steel U-shaped floor scale are tailored to a range of EU sizes.

- Weighing range: 0 ... 3000 kg
- Readability: 1 kg
- Calibration value: 1 kg
- Verifiable M III
- Stainless steel IP68 - IP65
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-3000UL

The UCI hardness tester PCE-3000UL can be used for quickly checking the hardness of components even after installation, two probes are included. The device offers a wide measurement range, easy handling, robust design, and a temperature resistance up to 40 °C (104 °F). Measures hardness in Rockwell, Brinell and Vickers, the UCI hardness tester can test the tensile strength of steels up to 1740 MPa or 70 HRC. The tester comes with two probes, one UCI probe for non-destructive testing and one Leeb probe for rebound testing.

- Non-destructive hardness testing
- Ultrasonic + Leeb hardness test method
- Different hardness scales selectable
- 5 materials testable
- 2 probes for UCI and Leeb rebound testing

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 1500U SST

The stainless steel U-shaped heavy duty scale is a certifiable scale supplied in calibrated form. The dimensions of the stainless steel U-shaped heavy duty scale are tailored to a range of EU sizes.


- Weighing range: 0 ... 1500 kg
- Readability: 0.5 kg
- Calibration value: 0.5 kg
- Verifiable M III
- Stainless steel IP68 - I6P5

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 3000U SST
The stainless steel U-shaped heavy duty scale is a certifiable scale supplied in calibrated form. The dimensions of the stainless steel U-shaped heavy duty scale are tailored to a range of EU sizes.

- Weighing range: 0 ... 3000 kg
- Readability: 1 kg
- Calibration value: 1 kg
- Verifiable M III
- Stainless steel IP68 - IP65
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VE 1014N-F

The two-way optics is a great advantage of the PCE-VE 1014N-F industrial borescope. There is easy control of the camera head with the PCE-VE 1034N-F industrial borescope. The PCE-VE 1034N-F industrial borescope allows you to capture images and videos, and the videos are also stored with an audio recording. 


- Cable length: 1.5 m / 4.9 ft
- Head: 2-way
- Diameter: 4.5 mm / 0.18 in
- Resolution: 640 x 480 Pixel
- Storage of pictures and videos
- 8 GB memory card incl.
- LED lighting

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 1500U SST

The stainless steel U-shaped industrial scales are certifiable scales supplied in calibrated form. The dimensions of the stainless steel U-shaped industrial scales are tailored to a range of EU sizes.


- Weighing range: 0 ... 1500 kg
- Readability: 0.5 kg
- Calibration value: 0.5 kg
- Verifiable M III
- Stainless steel IP68 - IP65

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 3000U SST
The stainless steel U-shaped industrial scales are certifiable scales supplied in calibrated form. The dimensions of the stainless steel U-shaped industrial scales are tailored to a range of EU sizes.

- Weighing range: 0 ... 3000 kg
- Readability: 1 kg
- Calibration value: 1 kg
- Verifiable M III
- Stainless steel IP68 - IP65
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VE 1014N-F

The two-way optics is a great advantage of the PCE-VE 1014N-F inspection camera. There is easy control of the camera head with the PCE-VE 1034N-F inspection camera. The PCE-VE 1034N-F inspection camera allows you to capture images and videos, and the videos are also stored with an audio recording. 


- Cable length: 1.5 m / 4.9 ft
- Head: 2-way
- Diameter: 4.5 mm / 0.18 in
- Resolution: 640 x 480 Pixel
- Storage of pictures and videos
- 8 GB memory card incl.
- LED lighting

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-3000UL

The UCI hardness tester PCE-3000UL can be used for quickly checking the hardness of components even after installation, two probes are included. The device offers a wide measurement range, easy handling, robust design, and a temperature resistance up to 40 °C (104 °F). Measures hardness in Rockwell, Brinell and Vickers, the UCI hardness tester can test the tensile strength of steels up to 1740 MPa or 70 HRC. The tester comes with two probes, one UCI probe for non-destructive testing and one Leeb probe for rebound testing.

- Non-destructive hardness testing
- Ultrasonic + Leeb hardness test method
- Different hardness scales selectable
- 5 materials testable
- 2 probes for UCI and Leeb rebound testing

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 1500U SST

The U-shaped pallet scales are calibratable scales that will be already calibrated before delivery. The measurements of the U-shaped pallet scales are exactly accordant to serial EU palettes. The U-shape of the pallet scales allows quick and easy loading of the scales even by means of forklift scales. The four load cells of the U-shaped pallet scales are IP68 protected and are embedded at the corners of the U-shaped scales.


- Weighing range: 0 ... 1500 kg
- Readability: 0.5 kg
- Calibration value: 0.5 kg
- Verifiable M III
- Stainless steel IP68 - IP65

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 3000U SST
The U-shaped pallet scales are calibratable scales that will be already calibrated before delivery. The measurements of the U-shaped pallet scales are exactly accordant to serial EU palettes. The U-shape of the pallet scales allows quick and easy loading of the scales even by means of forklift scales. The four load cells of the U-shaped pallet scales are IP68 protected and are embedded at the corners of the U-shaped scales.

- Weighing range: 0 ... 3000 kg
- Readability: 1 kg
- Calibration value: 1 kg
- Verifiable M III
- Stainless steel IP68 - IP65
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 1500U SST

The U-shaped stainless steel scale is a certifiable scale supplied in calibrated form. The dimensions of the U-shaped stainless steel scale are tailored to a range of EU sizes.


- Weighing range: 0 ... 1500 kg
- Readability: 0.5 kg
- Calibration value: 0.5 kg
- Verifiable M III
- Stainless steel IP68 - IP65

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 3000U SST
The U-shaped stainless steel scale is a certifiable scale supplied in calibrated form. The dimensions of the U-shaped stainless steel scale are tailored to a range of EU sizes.

- Weighing range: 0 ... 3000 kg
- Readability: 1 kg
- Calibration value: 1 kg
- Verifiable M III
- Stainless steel IP68 - IP65
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 1500U SST
The stainless steel U-shaped system balance is a certifiable scale supplied in calibrated form. The dimensions of the stainless steel U-shaped system balance are tailored to a range of EU sizes.

- Weighing range: 0 ... 1500 kg
- Readability: 0.5 kg
- Calibration value: 0.5kg
- Verifiable M III
- Stainless steel IP68 - IP65
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-3000UL

The UCI hardness tester PCE-3000UL can be used for quickly checking the hardness of components even after installation, two probes are included. The device offers a wide measurement range, easy handling, robust design, and a temperature resistance up to 40 °C (104 °F). Measures hardness in Rockwell, Brinell and Vickers, the UCI hardness tester can test the tensile strength of steels up to 1740 MPa or 70 HRC. The tester comes with two probes, one UCI probe for non-destructive testing and one Leeb probe for rebound testing.

- Non-destructive hardness testing
- Ultrasonic + Leeb hardness test method
- Different hardness scales selectable
- 5 materials testable
- 2 probes for UCI and Leeb rebound testing

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VE 1014N-F

The two-way optics is a great advantage of the PCE-VE 1014N-F videoscope or inspection camera. There is easy control of the camera head with the PCE-VE 1034N-F videoscope. The PCE-VE 1034N-F videoscope allows you to capture images and videos, and the videos are also stored with an audio recording. 


- Cable length: 1.5 m / 4.9 ft
- Camera head: 2-way
- Diameter: 4.5 mm / 0.18 in
- Resolution: 640 x 480 Pixel
- Storage of pictures and videos
- 8 GB memory card incl.
- LED lighting

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 1500U SST

The stainless steel U-shaped weighbridge is a certifiable scale supplied in calibrated form. The dimensions of the stainless steel U-shaped weighbridge are tailored to a range of EU sizes.


- Weighing range: 0 ... 1500 kg
- Readability: 0.5 kg
- Calibration value: 0.5 kg
- Verifiable M III
- Stainless steel IP68 - IP65

 

Manufacturer: PCE Instruments
Test Instruments manufacturer