Base model. The Geiger Counter Radex RD1503 is able to measure gamma radiation. The radiation Analyzer is highly sophisticated, reliable and not expensive. A lot of functions are integrated into the radiation measurement device.

- Dose Rate: 0.05 ... 999 Sv / h
- Exposure dose rate: 5 ... 999 μRem / h
- Gamma-ray energy: 0.1 ... 1.25 MeV
- Limit: 0.1 ... 99.0 Sv / h
- Calculation time: 40 ± 0.5 seconds

 

The radioactivity meter Radex RD1503 is able to measure gamma radiation.

- Dose Rate: 0.05 ... 999 Sv / h
- Exposure dose rate: 5 ... 999 μRem / h
- Gamma-ray energy: 0.1 ... 1.25 MeV
- Limit: 0.1 ... 99.0 Sv / h
- Calculation time: 40 ± 0.5 seconds

 

DAkkS calibration certificate for sound level meters, certifies the traceability to national test standards. In this case for the DIN ISO 17025 standard.

- DAkkS calibration
- 2 point calibration 94 dB and 124 dB
- DIN ISO 17025 standard

N.B. Calibration certificates are issued specifically for the customer and are excluded from the right of return.

The flat miniature force sensor has a height of only 11 mm. With a diameter of 20 mm, this miniature force sensor is very compact. This force sensor achieves a measurement uncertainty of only 0.5%. 

 

- Rated load / force F.S.: 5-2000 kg / 50 N - 20 kN
- Limit load / force: 120 %
- Breaking load / force: 150 %
- Rated output: 1.0 – 1.5 mV/V

- Force sensor nominal load selectable!

The PCE-VT 1100 Accelerometer is designed for quick measurements of an imbalance in machines and the examination of bearings and gears. The Accelerometer is also frequently used to evaluate the state of small electronic motors. Meter can only be used for realtime measurement, no memory storage.

- Vibration Acceleration: 0.01 ... 199.9 m/s2 (peak value)
- Vibration Speed: 0.01 ... 199.9 mm/s (effective)
- Vibration Displacement:  0.001 ... 1.999 mm (peak-peak)
- Accuracy: ±5%, ±2 Digits (20 Hz ... 1 KHz) / ±10%, ±2 Digits (10 Hz ... 20 Hz)
- Frequency: Accel. and Vel. 10 Hz ... 1 kHz, Displacement 10 Hz ... 500 Hz 
- Frequency range: 10 Hz ... 1 kHz 
- Needle probes: 10mm / 0.39" // 45mm / 1.77"

The PCE-VT 1100S accelerometer is suitable for relative measurements on various machines. With the 45 mm long needle probe, you can access hard-to-reach places in machines and motors. For this reason, this accelerometer is used for rapid measurement of imbalance and for checking bearing and gear conditions.

- Frequency range: 10 Hz ... 1 kHz
- Measures speed, distance, acceleration in metric units
- Holds the reading after each measurement
- Portable and battery operated
- Needle probe: 45mm / 1.77"

The air flow meter is compatible with and can be mounted on to a wide variety of available measuring equipment. The sensor will detect even the minutest movements of air and the results are then output in analogue form. With heating.

- Output signal: 4 … 20-mA  
- Operating voltage: 12 … 36V DC
- Measurement reading range: 0.5 m/s … 50 m/s (1.1 ... 111.8 mph)

The air flow meter is compatible with and can be mounted on to a wide variety of available measuring equipment. The sensor will detect even the minutest movements of air and the results are then output in analogue form. With heating.

- Output signal: 0 … 10V
- Operating voltage: 12 … 36V DC
- Measurement reading range: 0.5 m/s … 50 m/s (1.1 ... 111.8 mph)

The air flow meter measures the direction of wind and the results are then output in analogue form. The sensor is compatible with and can be mounted on to a wide variety of available measuring equipment. With heating.

- Output signal: 4 … 20-mA
- Operating voltage: 12 … 36V DC
- Measurement reading range: 0 … 360°

The air flow meter measures the direction of wind and the results are then output in analogue form. The sensor is compatible with and can be mounted on to a wide variety of available measuring equipment. With heating.

- Output signal: 0 … 10V DC
- Operating voltage: 12 … 36V DC
- Measurement reading range: 0 … 360°

The benchtop scale has a 300 x 400 mm stainless steel platform that can be removed for cleaning. Benchtop scale for flexible use, independent of the power supply.

- Weighing range: 30 kg / 66 lb
- Readability: 2 g / 0.07 oz
- Taring range: over the full range
- Piece counting
- Settling time: adjustable
- Weighing units: kg / lb
- Platform size: 300 x 400 mm / 11.8 x 15.7"
- Mains and battery operation

The benchtop scale has a 300 x 400 mm stainless steel platform that can be removed for cleaning. Benchtop scale for flexible use, independent of the power supply.

- Weighing range: 60 kg / 132 lb
- Readability: 5 g / 0.17 oz
- Taring range: over the full range
- Piece counting
- Settling time: adjustable
- Weighing units: kg / lb
- Platform size: 300 x 400 mm / 11.8 x 15.7"
- Mains and battery operation

- Measurable electrical parameters: AC V, AC A, resistance
- Clamp diameter: 30 mm
- Operating temperature: -10 ... 50°C / 50 ... 122°F
- Current consumption: 10-mA
- Incl. ISO calibration certificate

- Measurable electrical parameters: AC V, AC A, resistance
- Clamp diameter: 30 mm
- Operating temperature: -10 ... 50°C / 50 ... 122°F
- Current consumption: 10-mA
- Incl. ISO calibration certificate