Concrete Rebound Test Hammer PCE-HT 225E
£ 1,963.00
Price excl. VAT &. delivery

PCE-HT 225E is a concrete test hammer, also called a concrete rebound hammer or Swiss hammer, used for non-destructive measurements of surface hardness and compression strength. Suitable for use with concrete, rock and building materials, this rebound hammer features a direct digital display, voice functionality, USB port data interface and memory for storing up 200 measurement values.


  • Test range: 10 … 60 MPa or 100 … 600 kg/cm² / 1450.38 … 8702.26 psi
  • Impact energy: 2.207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
  • Impact stroke: 75 ± 0.3 mm / 2.95 ± 0.012 in
  • Radius of spherical tip: 25 ± 1 mm / 0.99 ± 0.04 in
  • Data processing software included

Concrete tester / concrete measuring device PCE-HT 225E
£ 1,963.00
Price excl. VAT &. delivery

Concrete tester / concrete measuring device, also called a concrete rebound hammer or Swiss hammer, used for non-destructive measurements of surface hardness and compression strength. Suitable for use with concrete, rock and building materials, this rebound hammer features a direct digital display, voice functionality, USB port data interface and memory for storing up 200 measurement values.


  • Test range: 10 … 60 MPa or 100 … 600 kg/cm² / 1450.38 … 8702.26 psi
  • Impact energy: 2.207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
  • Impact stroke: 75 ± 0.3 mm / 2.95 ± 0.012 in
  • Radius of spherical tip: 25 ± 1 mm / 0.99 ± 0.04 in
  • Data processing software included

 

Durometer PCE-HT 225E
£ 1,963.00
Price excl. VAT &. delivery

PCE-HT 225E is a durometer, also called a concrete rebound hammer or Swiss hammer, used for non-destructive measurements of surface hardness and compression strength. Suitable for use with concrete, rock and building materials, this rebound hammer features a direct digital display, voice functionality, USB port data interface and memory for storing up 200 measurement values.


  • Test range: 10 … 60 MPa or 100 … 600 kg/cm² / 1450.38 … 8702.26 psi
  • Impact energy: 2.207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
  • Impact stroke: 75 ± 0.3 mm / 2.95 ± 0.012 in
  • Radius of spherical tip: 25 ± 1 mm / 0.99 ± 0.04 in
  • Data processing software included

Hardness Tester PCE-HT 225E
£ 1,963.00
Price excl. VAT &. delivery

PCE-HT 225E is a hardness test hammer, also called a concrete rebound hammer or Swiss hammer, used for non-destructive measurements of surface hardness and compression strength. Suitable for use with concrete, rock and building materials, this rebound hammer features a direct digital display, voice functionality, USB port data interface and memory for storing up 200 measurement values.


  • Test range: 10 … 60 MPa or 100 … 600 kg/cm² / 1450.38 … 8702.26 psi
  • Impact energy: 2.207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
  • Impact stroke: 75 ± 0.3 mm / 2.95 ± 0.012 in
  • Radius of spherical tip: 25 ± 1 mm / 0.99 ± 0.04 in
  • Data processing software included

Material Tester PCE-HT 225E
£ 1,963.00
Price excl. VAT &. delivery

PCE-HT 225E is a material test hammer, also called a concrete rebound hammer or Swiss hammer, used for non-destructive measurements of surface hardness and compression strength. Suitable for use with concrete, rock and building materials, this rebound hammer features a direct digital display, voice functionality, USB port data interface and memory for storing up 200 measurement values.


  • Test range: 10 … 60 MPa or 100 … 600 kg/cm² / 1450.38 … 8702.26 psi
  • Impact energy: 2.207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
  • Impact stroke: 75 ± 0.3 mm / 2.95 ± 0.012 in
  • Radius of spherical tip: 25 ± 1 mm / 0.99 ± 0.04 in
  • Data processing software included

NDT Test Instruments PCE-HT 225E
£ 1,963.00
Price excl. VAT &. delivery

PCE-HT 225E is a roll hardness test hammer, also called a rolled paper rebound hammer or Swiss hammer, used for non-destructive measurements of surface hardness and compression strength. Suitable for use with rolled paper, concrete, rock and building materials, this rebound hammer features a direct digital display, voice functionality, USB port data interface and memory for storing up 200 measurement values.


  • Test range: 10 … 60 MPa or 100 … 600 kg/cm² / 1450.38 … 8702.26 psi
  • Impact energy: 2.207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
  • Impact stroke: 75 ± 0.3 mm / 2.95 ± 0.012 in
  • Radius of spherical tip: 25 ± 1 mm / 0.99 ± 0.04 in
  • Data processing software included

Surface Testing - Concrete Hammer PCE-HT 225E
£ 1,963.00
Price excl. VAT &. delivery

PCE-HT 225E is a surface testing concrete test hammer, also called a concrete rebound hammer or Swiss hammer, used for non-destructive measurements of surface hardness and compression strength. Suitable for use with concrete, rock and building materials, this rebound hammer features a direct digital display, voice functionality, USB port data interface and memory for storing up 200 measurement values.


  • Test range: 10 … 60 MPa or 100 … 600 kg/cm² / 1450.38 … 8702.26 psi
  • Impact energy: 2.207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
  • Impact stroke: 75 ± 0.3 mm / 2.95 ± 0.012 in
  • Radius of spherical tip: 25 ± 1 mm / 0.99 ± 0.04 in
  • Data processing software included

Portable Ultrasonic Flow Meter PCE-TDS 200 SR
£ 1,954.00
Price excl. VAT &. delivery
The Portable Ultrasonic Flow Meter has a measuring range of ±32 m/s. To perform flow measurement with the Portable Ultrasonic Flow Meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.

  • Measuring range: ±32 m/s
  • Resolution: 0.001 m/s
  • Sensor for pipe diameters: DN 15 … 100 / 20 … 108 mm
  • for different media
  • for different pipe materials
  • Measuring parameters: Flow velocity, volume flow and volume
  • Interface: USB
  • Data logger: 32 GB memory capacity (10 million measuring points)
  • LiPo battery
Ultrasonic Flow Meter PCE-TDS 200 SR
£ 1,954.00
Price excl. VAT &. delivery
The ultrasonic flow meter has a measuring range of ±32 m/s. To perform flow measurement with the ultrasonic flow meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.

  • Measuring range: ±32 m/s
  • Resolution: 0.001 m/s
  • Pipe size: DN 15 … 100 / 20 … 108 mm
  • for different media
  • for different pipe materials
  • Measuring parameters: Flow velocity,  volume flow and volume
  • Interface: USB
  • Data logger: 10 million measuring points
  • LiPo battery