Industrial Measurement Products and Solutions
Order no.: PCE-VC20

PCE-VC20 is a portable shaker vibration calibrator used to calibrate vibration sensors, meters, analyzers and testers. Suitable for calibrating equipment weighing up to 600 g (1.32 lb), this rechargeable-battery-powered vibration calibrator generates mechanical vibrations with a quartz-stabilized vibration frequency of 159.15 Hz (radian frequency 1000/s).


Load-independent vibration magnitude with an RMS of:
- 10 m/s² vibration acceleration
- 10 mm/s vibration velocity
- 10 µm vibration displacement

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VC20

PCE-VC20 is a vibration meter calibrator used to calibrate vibration sensors, analyzers and testers. Suitable for calibrating equipment weighing up to 600 g (1.32 lb), this rechargeable-battery-powered vibration calibrator generates mechanical vibrations with a quartz-stabilized vibration frequency of 159.15 Hz (radian frequency 1000/s).


Load-independent vibration magnitude with an RMS of:
- 10 m/s² vibration acceleration
- 10 mm/s vibration velocity
- 10 µm vibration displacement

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 1500F
The verifiable built-in floor scale of the PCE-SD ... F series is intended for flush installation and is optionally available with a built-in frame on request. The calibrated built-in floor scale is calibrated according to Calibration Class III and is approved throughout the EU for use for transfer of goods for two years.

- Weighing range : 1500 kg
- Readability : 0.5 kg
- Calibration included
- Calibratable M III
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PQC 13EU
The Dust Monitor PCE-PQC 13EU detects quickly where eg particles, air particles contaminate the air and can cause diseases such as asthma, bronchitis, skin and lung diseases.

- Measuring range: 0.3 ... 25 μm
- Measuring channel sizes: 0.5, 1.0, 5.0 μm
- Counting efficiency: 50% at 0.3 μm 100% at > 0.45 μm according to JIS
- ISO 14644-1, EU GMP Annex I, FS 209E
- Mass concentration
- Ethernet, USB
Incl. calibration certificate traceable to NIST ISO 21501-4 and JIS B9921
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PQC 13EU
The particle counter PCE-PQC 13EU detects quickly where eg particles, air particles contaminate the air and can cause diseases such as asthma, bronchitis, skin and lung diseases.

- Measuring range: 0.3 ... 25 μm
- Measuring channel sizes: 0.5, 1.0, 5.0 μm
- Counting efficiency: 50% at 0.3 μm 100% at > 0.45 μm according to JIS
- ISO 14644-1, EU GMP Annex I, FS 209E
- Mass concentration
- Ethernet, USB
Incl. calibration certificate traceable to NIST ISO 21501-4 and JIS B9921
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-WWSB8-S

PCE-WWSB8-S is a portable floor scale consisting of two weighing platforms and a carrying case with a built-in display and printer. Featuring connections for up to four weighing platforms (additional weighing platforms sold separately - see accessories), this floor scale calculates the total weight, wheel load and axle load of a vehicle.


- Weighing capacity per platform (wheel load): 8000 kg / 17636 lbs / 8.8 T
- Sum function for calculating vehicle weight plus trailer
- IP65 ingress protection rating on load cell for outdoor use

Manufacturer: Dini Argeo GmbH
Test Instruments manufacturer
Order no.: PCE-WWSB8-S

PCE-WWSB8-S is a portable platform scale consisting of two weighing platforms and a carrying case with a built-in display and printer. Featuring connections for up to four weighing platforms (additional weighing platforms sold separately - see accessories), this floor scale calculates the total weight, wheel load and axle load of a vehicle.


- Weighing capacity per platform (wheel load): 8000 kg / 17636 lbs / 8.8 T
- Sum function for calculating vehicle weight plus trailer
- IP65 ingress protection rating on load cell for outdoor use

Manufacturer: Dini Argeo GmbH
Test Instruments manufacturer
Order no.: PCE-WWSB8-S

PCE-WWSB8-S is a portable industrial floor scale consisting of two weighing platforms and a carrying case with a built-in display and printer. Featuring connections for up to four weighing platforms (additional weighing platforms sold separately - see accessories), this floor scale calculates the total weight, wheel load and axle load of a vehicle.


- Weighing capacity per platform (wheel load): 8000 kg / 17636 lbs / 8.8 T
- Sum function for calculating vehicle weight plus trailer
- IP65 ingress protection rating on load cell for outdoor use

Manufacturer: Dini Argeo GmbH
Test Instruments manufacturer
Order no.: PCE-WWSB8-S

PCE-WWSB8-S is a portable floor scale for shipping consisting of two weighing platforms and a carrying case with a built-in display and printer. Featuring connections for up to four weighing platforms (additional weighing platforms sold separately - see accessories), this floor scale calculates the total weight, wheel load and axle load of a vehicle.


- Weighing capacity per platform (wheel load): 8000 kg / 17636 lbs / 8.8 T
- Sum function for calculating vehicle weight plus trailer
- IP65 ingress protection rating on load cell for outdoor use

Manufacturer: Dini Argeo GmbH
Test Instruments manufacturer
Order no.: PCE-WWSB8-S

PCE-WWSB8-S are vehicle weighing pads, portable weighbridge or floor scale consisting of two weighing platforms and a carrying case with a built-in display and printer. Featuring connections for up to four weighing pads (additional weighing pads sold separately - see accessories), this floor scale calculates the total weight, wheel load and axle load of a vehicle.


- Weighing capacity per platform (wheel load): 8000 kg / 17636 lbs / 8.8 T
- Sum function for calculating vehicle weight plus trailer
- IP65 ingress protection rating on load cell for outdoor use

Manufacturer: Dini Argeo GmbH
Test Instruments manufacturer
Order no.: PCE-WWSB8-S

PCE-WWSB8-S is a portable weighbridge or floor scale consisting of two weighing platforms and a carrying case with a built-in display and printer. Featuring connections for up to four weighing platforms (additional weighing platforms sold separately - see accessories), this floor scale calculates the total weight, wheel load and axle load of a vehicle.


- Weighing capacity per platform (wheel load): 8000 kg / 17636 lbs / 8.8 T
- Sum function for calculating vehicle weight plus trailer
- IP65 ingress protection rating on load cell for outdoor use

Manufacturer: Dini Argeo GmbH
Test Instruments manufacturer
Order no.: PCE-VE 380N-LOC

The PCE-VE 380N-LOC drain camera provides you with new, optical insights into the inner workings of machines and systems as well as in cavities, ventilation ducts, down pipes, chimneys, sewage pipes... The drain camera PCE-VE 380N-LOC is the ideal tool for maintenance and repair in any industrial area, craft or workshop. 


- Camera head diameter : 28 mm / 1.1"
- Waterproof camera head
- Camera cable length: 30 m / 98ft 5"
- SD memory card
- Bright LED lighting
- incl. Locator (to locate the damaged area)

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VE 380N-LOC

The PCE-VE 380N-LOC industrial borescope provides you with new, optical insights into the inner workings of machines and systems as well as in cavities, ventilation ducts, down pipes, chimneys, sewage pipes... The industrial borescope PCE-VE 380N-LOC is the ideal tool for maintenance and repair in any industrial area, craft or workshop. 


- Camera head diameter : 28 mm / 1.1"
- Waterproof camera head
- Camera cable length: 30 m / 98ft 5"
- SD memory card
- Bright LED lighting
- incl. Locator (to locate the damaged area)

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VE 380N-LOC

The PCE-VE 380N-LOC snake camera provides you with new, optical insights into the inner workings of machines and systems as well as in cavities, ventilation ducts, down pipes, chimneys, sewage pipes... The snake camera PCE-VE 380N-LOC is the ideal tool for maintenance and repair in any industrial area, craft or workshop. 


- Camera head diameter : 28 mm / 1.1"
- Waterproof camera head
- Camera cable length: 30 m / 98ft 5"
- SD memory card
- Bright LED lighting
- incl. Locator (to locate the damaged area)

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VE 380N-LOC

The PCE-VE 380N-LOC surface testing fiberscope snake camera provides you with new, optical insights into the inner workings of machines and systems as well as in cavities, ventilation ducts, down pipes, chimneys, sewage pipes... The surface testing fiberscope snake camera PCE-VE 380N-LOC is the ideal tool for maintenance and repair in any industrial area, craft or workshop. 


- Camera head diameter : 28 mm / 1.1"
- Waterproof camera head
- Camera cable length: 30 m / 98ft 5"
- SD memory card
- Bright LED lighting
- incl. Locator (to locate the damaged area)

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VE 380N-LOC

The PCE-VE 380N-LOC videoscope or inspection camera provides you with new, optical insights into the inner workings of machines and systems as well as in cavities, ventilation ducts, down pipes, chimneys, sewage pipes, etc. The Videoscope PCE-VE 380N-LOC is the ideal camera tool for maintenance and repair in any industrial area, craft or workshop. 

 

- Camera head diameter : 28 mm / 1.1"
- Waterproof camera head
- Camera cable length: 30 m / 98ft 5"
- SD memory card
- Bright LED lighting
- incl. Locator (to locate the damaged area)

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VE 380N-LOC

The PCE-VE 380N-LOC waterproof inspection camera provides you with new, optical insights into the inner workings of machines and systems as well as in cavities, ventilation ducts, down pipes, chimneys, sewage pipes... The waterproof inspection camera PCE-VE 380N-LOC is the ideal tool for maintenance and repair in any industrial area, craft or workshop. 


- Camera head diameter : 28 mm / 1.1"
- Waterproof camera head
- Camera cable length: 30 m / 98ft 5"
- SD memory card
- Bright LED lighting
- incl. Locator (to locate the damaged area)

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: MCW09T12-1

The MCW09T12 stainless steel Crane Scales are designed to be sturdy and reliable, weighing goods up to 12000 kg indoors or outdoors. The Crane Scales, with a large 40 mm DOT LED display, allow for maximum visibility from all angles and in any lighting condition, including direct sunlight. The Crane Scales are IP67 rated.


- Capacity [Max]: 12000 kg / 26455 lbs
- Readability [d]: 5 kg / 11 lbs 

 

Manufacturer: Dini Argeo GmbH
Test Instruments manufacturer
Order no.: MCW09T12-1

The MCW09T12 stainless steel Force Gauge is designed to be sturdy and reliable, weighing goods up to 12000 kg indoors or outdoors. The Force Gauge, with a large 40 mm DOT LED display, allows for maximum visibility from all angles and in any lighting condition, including direct sunlight. The Force Gauge is IP67 rated.


- Capacity [Max]: 12000 kg / 26455 lbs
- Readability [d]: 5 kg / 11 lbs

 

Manufacturer: Dini Argeo GmbH
Test Instruments manufacturer
Order no.: MCW09T12-1

The MCW09T12 stainless steel hanging scales are designed to be sturdy and reliable, weighing goods up to 12000 kg indoors or outdoors. The hanging scales, with a large 40 mm DOT LED display, allow for maximum visibility from all angles and in any lighting condition, including direct sunlight. The hanging scales are IP67 rated.


- Capacity [Max]: 12000 kg / 26455 lbs
- Readability [d]: 5 kg / 11 lbs

Manufacturer: Dini Argeo GmbH
Test Instruments manufacturer