Industrial Measurement Products and Solutions
Order no.: Easyloc

This cable locating device is capable of finding underground cables and pipes laid to a depth of 7m, and determining their laying depth. Transmitter and receiver included.


- Frequency ranges: 15 kHz ... 23 kHz
- Resolution: 0.1 m
- Accuracy (with undisturbed signal): ± 10% (up to 2 m) 

 

Manufacturer: Seba Dynatronic
Test Instruments manufacturer
Order no.: PCE-SD 1500B SST

The floor scale PCE-SD..B SST is a verifiable weighing balance that is intended for flexible use. Due to the flexibly movable weighing beam (4 m), the floor scale is well suited for weighing large objects, and non-standard pallet sizes can also be weighed quickly and conveniently.

 

- Weighing range : 1500 kg
- Readability: 0.5 kg
- Calibration value: 0.5 kg
- Verifiable M III

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 3000E

The floor scale is supplied calibrated and is intended for stationary use with its solid construction. Due to the robust design and the large platform, this calibrated weighing platform is particularly suitable for weighing large objects.

 

- Weighing range : 3000 kg
- Readability : 1 kg
- Taring range: over the entire weighing range
- Includes initial verification
- Calibratable M III

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 300B SST

The floor scale PCE-SD..B SST is a verifiable weighing balance that is intended for flexible use. Due to the flexibly movable weighing beam (4 m), the floor scale is well suited for weighing large objects, and non-standard pallet sizes can also be weighed quickly and conveniently.

 

- Weighing range : 300 kg
- Readability: 0.1 kg
- Calibration value: 0.1 kg
- Verifiable M III

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 600B SST

The floor scale PCE-SD..B SST is a verifiable weighing balance that is intended for flexible use. Due to the flexibly movable weighing beam (4 m), the floor scale is well suited for weighing large objects, and non-standard pallet sizes can also be weighed quickly and conveniently.

 

- Weighing range : 600 kg
- Readability: 0.2 kg
- Calibration value: 0.2 kg
- Verifiable M III

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 1500B SST

The Pallet Beams PCE-SD..B SST are a verifiable weighing balance that is intended for flexible use. Due to the flexibly movable weighing beam (4 m), the pallet beams are well suited for weighing large objects, and non-standard pallet sizes can also be weighed quickly and conveniently.

 

- Weighing range : 1500 kg
- Readability: 0.5 kg
- Calibration value: 0.5 kg
- Verifiable M III

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 300B SST

The Pallet Beams PCE-SD..B SST are a verifiable weighing balance that is intended for flexible use. Due to the flexibly movable weighing beam (4 m), the Pallet Beams are well suited for weighing large objects, and non-standard pallet sizes can also be weighed quickly and conveniently.

 

- Weighing range : 300 kg
- Readability: 0.1 kg
- Calibration value: 0.1 kg
- Verifiable M III

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 600B SST

The pallet beams PCE-SD..B SST are a verifiable weighing balance that is intended for flexible use. Due to the flexibly movable weighing beam (4 m), the pallet beams are well suited for weighing large objects, and non-standard pallet sizes can also be weighed quickly and conveniently.

 

- Weighing range : 600 kg
- Readability: 0.2 kg
- Calibration value: 0.2 kg
- Verifiable M III

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DDM 20

The PCE-DDM 20 Crane Scale is the ideal tool for weighing big loads and for measuring strong tensile forces. The PCE-DDM 20 Crane Scale is delivered in a protective carrying case and includes two shackles made of heavy-duty steel. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.


- Measurement range: 20,000 kg / 200 kN / 44,092 lbs
- Resolution: 10 kg / 100 N
- Units of measurement: kg / t / lbs / N / kN
- Supplied with remote control indicator

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-3000U

The UCI Durometer PCE-3000U can be used for quickly checking the hardness of components even after installation. The device offers a wide measurement range, easy handling, robust design and a temperature resistance up to 40 °C or 104 °F. In addition to the hardness scales in Rockwell, Brinell and Vickers, the UCI hardness tester can test the tensile strength of steels up to 1740 MPa or 70 HRC.

- Ultrasonic non-destructive hardness testing (UCI)
- Different hardness scales selectable
- 5 materials testable
- One 50 N UCI probe included
- Other probes as option

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DDM 20

The PCE-DDM 20 Force Gauge is the ideal tool for weighing big loads and for measuring strong tensile forces. The PCE-DDM 20 Force Gauge is delivered in a protective carrying case and includes two shackles made of heavy-duty steel. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.


- Measurement range: 20,000 kg / 200 kN / 44,092 lbs
- Resolution: 10 kg / 100 N
- Units of measurement: kg / t / lbs / N / kN
- Supplied with remote control indicator

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DDM 20

The PCE-DDM 20 Hanging Scales are the ideal tool for weighing big loads and for measuring strong tensile forces. The hanging scales are delivered in a protective carrying case and includes two shackles made of heavy-duty steel. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.


- Measurement range: 20,000 kg / 200 kN / 44,092 lbs
- Resolution: 10 kg / 100 N
- Units of measurement: kg / t / lbs / N / kN
- Supplied with remote control indicator

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-3000U

The UCI hardness tester PCE-3000U can be used for quickly checking the hardness of components even after installation. The device offers a wide measurement range, easy handling, robust design and a temperature resistance up to 40 °C or 104 °F. In addition to the hardness scales in Rockwell, Brinell and Vickers, the UCI hardness tester can test the tensile strength of steels up to 1740 MPa or 70 HRC.

- Ultrasonic non-destructive hardness testing (UCI)
- Different hardness scales selectable
- 5 materials testable
- One 50 N UCI probe included

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-3000U

The UCI material tester PCE-3000U can be used for quickly checking the hardness of components even after installation. The device offers a wide measurement range, easy handling, robust design and a temperature resistance up to 40 °C or 104 °F. In addition to the hardness scales in Rockwell, Brinell and Vickers, the UCI hardness tester can test the tensile strength of steels up to 1740 MPa or 70 HRC.

- Ultrasonic non-destructive hardness testing (UCI)
- Different hardness scales selectable
- 5 materials testable
- One 50 N UCI probe included

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DDM 20

The Tension Dynamometer PCE-DDM 20 is the ideal tool for weighing big loads and for measuring strong tensile forces. The Tension Dynamometer PCE-DDM 20 is delivered in a protective carrying case and includes two shackles made of heavy-duty steel. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.


- Measurement range: 20,000 kg / 200 kN / 44,092 lbs
- Resolution: 10 kg / 100 N
- Units of measurement: kg / t / lbs / N / kN
- Supplied with remote control indicator

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-3000U

The UCI ultrasonic tester PCE-3000U can be used for quickly checking the hardness of components even after installation. The device offers a wide measurement range, easy handling, robust design and a temperature resistance up to 40 °C or 104 °F. In addition to the hardness scales in Rockwell, Brinell and Vickers, the UCI ultrasonic tester can test the tensile strength of steels up to 1740 MPa or 70 HRC.

- Ultrasonic non-destructive hardness testing (UCI)
- Different hardness scales selectable
- 5 materials testable
- One 50 N UCI probe included

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-TDS 100H+

The ultrasonic flow meter is required as part of a control measurement or to quickly determine the flow in a pipeline and is therefore a portable / easy-to-install measuring system. The ultrasonic flow meter works according to the transit time difference method. The measuring principle of the ultrasonic flow meter is quite simple. 

 

- Measuring range: -32 ... 32 m/s, -105 ... 105 ft/s
- Resolution: 0.0001 m/s, 0.00033 ft/s
- Pipe size: DN 50 … 700, 57 … 720 mm (approx. 2 … 28")
- Sensor temperature range: 0 ... 160°C / 32 ... 320°F
- Sensor installation: V, Z
- Incl. sensors TDS-M1
- Incl. evaluation software
- Incl. temperature datalogger
- Incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-TDS 100H+

The ultrasonic flow tester is required as part of a control measurement or to quickly determine the flow in a pipeline and is therefore a portable / easy-to-install measuring system. The ultrasonic flow tester works according to the transit time difference method. The measuring principle of the ultrasonic flow tester is quite simple. 

 

- Measuring range: -32 ... 32 m/s, -105 ... 105 ft/s
- Resolution: 0.0001 m/s, 0.00033 ft/s
- Pipe size: DN 50 … 700, 57 … 720 mm (approx. 2 … 28")
- Sensor temperature range: 0 ... 160°C / 32 ... 320°F
- Sensor installation: V, Z
- Incl. sensors TDS-M1
- Incl. evaluation software
- Incl. temperature datalogger
- Incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VM 31

The PCE-VM 31 Human Vibration Analyzer is designed for measuring human vibration at the workplace. The Vibration Analyzer can calculate hand-arm vibration measurements according to ISO 5349 and whole-body vibration measurements according to ISO 2631.


- Measuring of human vibration at the workplace
- Velocity, acceleration, displacement
- 3 channel FFT
- TEDS support
- Sensors not included - sold separately (see accessories)

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VM 31

The PCE-VM 31 Human Vibration Meter is designed for measuring human vibration at the workplace. The Vibration Meter can calculate hand-arm vibration measurements according to ISO 5349 and whole-body vibration measurements according to ISO 2631.


- Measuring of human vibration at the workplace
- Velocity, acceleration, displacement
- 3 channel FFT
- TEDS support
- Sensors not included - sold separately (see accessories)

 

Manufacturer: PCE Instruments
Test Instruments manufacturer