The Analytical Balance PCE-BS 300 is a light, rugged precision balance suitable for different purposes. The removable stainless steel pan allows the laboratory balance to be cleaned easily. The Analytical Balance PCE-BS 300 can be used for weighing as well as for piece counting.

- Weighing capacity: Max. 300 g/ 0.66 lb/10.58 oz 
- Readability (g): 0.01
- Repeatability (g): 0.01
- Calibratable
- Incl. ISO calibration certificate

The Benchtop Scale PCE-BS 300 is a light, rugged precision scale suitable for different purposes. The removable stainless steel pan allows the laboratory scale to be cleaned easily. The Benchtop Scale PCE-BS 300 can be used for weighing as well as for piece counting.

- Weighing capacity: Max. 300 g/ 0.66 lb/10.58 oz 
- Readability (g): 0.01
- Repeatability (g): 0.01
- Calibratable
- Incl. ISO calibration certificate

The Compact Balance PCE-BS 300 is a light, rugged precision balance suitable for different purposes. The removable stainless steel pan allows the laboratory balance to be cleaned easily. The Compact Balance PCE-BS 300 can be used for weighing as well as for piece counting.

 

- Weighing capacity: Max. 300 g
- Readability (g): 0.01
- Repeatability (g): 0.01
- Calibratable
- Incl. ISO calibration certificate

 

 

The Counting Scale is a light, rugged precision balance suitable for different purposes. The removable stainless steel pan allows the laboratory balance to be cleaned easily. The Counting Scale PCE-BS 300 can be used for weighing as well as for piece counting.

- Weighing capacity: Max. 300 g
- Readability (g): 0.01
- Repeatability (g): 0.01
- Incl. ISO calibration certificate

- AC voltage (40 ... 400 Hz): 750V
- DC voltage: 1000V
- Resistance: 40 Ω / 400 Ω
- Insulation resistance: 4 MΩ / 40 MΩ / 400 MΩ / 4000 MΩ
- 4 different test voltages up to 1 kV
- Auto power-off function
- Safety: EN 61010-1, CAT III 1000V

- AC voltage (40 ... 400 Hz): 750V
- DC voltage: 1000V
- Resistance: 40 Ω / 400 Ω
- Insulation resistance: 4 MΩ / 40 MΩ / 400 MΩ / 4000 MΩ
- 4 different test voltages up to 1 kV
- Auto power-off function
- Safety: EN 61010-1, CAT III 1000V

The LAB Scale is a light, rugged precision balance suitable for different purposes. The removable stainless steel pan allows the LAB scale to be cleaned easily. The LAB scale PCE-BS 300 can be used for weighing as well as for piece counting.

- Weighing capacity: Max. 300 g
- Readability (g): 0.01
- Repeatability (g): 0.01
- Incl. ISO calibration certificate

The Laboratory Balance PCE-BS 300 is a light, rugged precision balance suitable for different purposes. The removable stainless steel pan allows the laboratory balance to be cleaned easily. The Laboratory Balance PCE-BS 300 can be used for weighing as well as for piece counting.

- Weighing capacity: Max. 300 g/ 0.66 lb/10.58 oz 
- Readability (g): 0.01
- Repeatability (g): 0.01
- Calibratable
- Incl. ISO calibration certificate

The portable industrial counting scale PCE-BS 300 is a rugged precision balance suitable for different purposes. The removable stainless steel pan allows the laboratory balance to be cleaned easily. The industrial scale PCE-BS 300 can be used for weighing as well as for piece counting.

- Weighing capacity: Max. 300 g
- Resolution: 0.01 g
- Repeatability: 0.01 g
- Calibratable
- Incl. ISO calibration certificate

The Precision Balance PCE-BS 300 is a light, rugged precision balance suitable for different purposes. The removable stainless steel pan allows the laboratory balance to be cleaned easily. The Precision  Balance PCE-BS 300 can be used for weighing as well as for piece counting.

- Weighing capacity: Max. 300 g/ 0.66 lb/10.58 oz 
- Readability (g): 0.01
- Repeatability (g): 0.01
- Calibratable
- Incl. ISO calibration certificate

The Tabletop Scale is a light, rugged precision balance suitable for different purposes. The removable stainless steel pan allows the tabletop scale to be cleaned easily. The tabletop scale PCE-BS 300 can be used for weighing as well as for piece counting.

- Weighing capacity: Max. 300 g
- Readability (g): 0.01
- Repeatability (g): 0.01
- Incl. ISO calibration certificate

Due to its ball bearing, the load cell has a special resistance against lateral forces. The load cell has a strong output signal of approx. 4 mV / V and works with a measurement uncertainty of 0.03% F.S.. The load cell is used especially in harsh environments such as truck scales, train scales, machine weighing, etc..

- Rated load / force F.S.: 0.5 t ... 100 t / 5 kN ... 1 MN
- Corrosion resistant IP67
- Bearing surface ball bearing
- 700 Ohm

 

- Force sensor nominal load selectable! If require 50 t or 100 t please select variant.

The distance meter of high accuracy is ideal to measure level surfaces like streets, ways or roads. Its rugged construction makes it resistant to adverse climatologic conditions and other environmental conditions. The wheel measures automatically up to 9999.9 meters.

- Measurement range: 9999.9 m (only displays metric)
- Reading: 1 cm
- Tolerance: < 0.02 %
- Wheel diameter: 318.5 mm (=  1m perimeter)
- Wheel type: metal wheel
- Weight: 4100 g

 

Mechanical shore durometer for measuring hardness of soft elastomer with drag needle. The shore durometer is composed of a single component with a measuring head and a 360º dial. To improve the readability of peak value, the device comes with a drag needle, that ensures the maximum reading can be captured. Once it has been measured, it can be reset to zero. 

- Force of pressure: 0 to 12.5 N
- Penetrating body: 35º (according to Shore A)
- Equipped with drag needle
- Measurement range: 10 ... 90
  (pressure diminishes below 10 and above 90)
- Margin of error: ± 1
- Division of scale: 1
- incl. ISO Calibration Certificate

Mechanical shore hardness tester for measuring hardness of soft elastomer with drag needle. The shore hardness tester is composed of a single component with a measuring head and a 360º dial. To improve the readability of peak value, the device comes with a drag needle, that ensures the maximum reading can be captured. Once it has been measured, it can be reset to zero. 

- Force of pressure: 0 to 12.5 N
- Penetrating body: 35º (according to Shore A)
- Equipped with drag needle
- Measurement range: 10 ... 90
  (pressure diminishes below 10 and above 90)
- Margin of error: ± 1
- Division of scale: 1
- incl. ISO Calibration Certificate

The AC/DC automotive tester is a versatile measuring instrument for the determination of currents, voltages and many other electrical quantities. With a current clamp opening of 40 mm / 1.6 in, even cables with a larger diameter can be tested with the AC/DC automotive tester.

Measurement functions
- DC current
- AC current
- DC voltage
- AC voltage
- Resistance
- Frequency (direct)
- Frequency (current clamp)
- incl. ISO Calibration Certificate

The AC/DC clamp meter is a versatile measuring instrument for the determination of currents, voltages and many other electrical quantities. With a current clamp opening of 40 mm / 1.6 in, even cables with a larger diameter can be tested with the AC/DC clamp meter.

Measurement functions
- DC current
- AC current
- DC voltage
- AC voltage
- Resistance
- Frequency (direct)
- Frequency (current clamp)
- incl. ISO Calibration Certificate

The AC/DC clamp on tester is a versatile measuring instrument for the determination of currents, voltages and many other electrical quantities. With a current clamp opening of 40 mm / 1.6 in, even cables with a larger diameter can be tested with the AC/DC clamp on tester.

Measurement functions
- DC current
- AC current
- DC voltage
- AC voltage
- Resistance
- Frequency (direct)
- Frequency (current clamp)
- incl. ISO Calibration Certificate

The AC/DC current clamp is a versatile measuring instrument for the determination of currents, voltages and many other electrical quantities. With a current clamp opening of 40 mm / 1.6 in, even cables with a larger diameter can be tested with the AC/DC current clamp.

Measurement functions
- DC current
- AC current
- DC voltage
- AC voltage
- Resistance
- Frequency (direct)
- Frequency (current clamp)
- incl. ISO Calibration Certificate

The AC/DC digital multimeter is a versatile measuring instrument for the determination of currents, voltages and many other electrical quantities. With a current clamp opening of 40 mm / 1.6 in, even cables with a larger diameter can be tested with the AC/DC digital multimeter.

Measurement functions
- DC current
- AC current
- DC voltage
- AC voltage
- Resistance
- Frequency (direct)
- Frequency (current clamp)
- incl. ISO Calibration Certificate