Order no.: PCE-320

With the PCE-320 Dew Point Thermometer it is possible to measure climate conditions such as temperature and relative humidity, as well as determining surface temperature of objects simultaneously by using the included external temperature sensor or using an infrared measurement. The Dew Point Thermometer offers features such as average value, maximum, minimum, and hold functions at a reasonable price.


- Internal probe

- Temperature: -20°C ... 60°C / -4 ... 140°F
- Relative humidity: 10 ... 90% r.H.
- Temperature of global: -22°C ... 60°C / -8 ... 140°F
- Humidity: -68°C ... 60°C / -90 ... 140°F
- Dew point temperature: depending on the sensor

- External probe
- Temperature: -50° C ... 500° C / -58 ... 932°F

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PDR 10
The PCE-PDR 10 differential pressure meter is a pressure measurement gauge. Up to three pressure sensors can be connected to this differential pressure meter and synchronously read out and logged. Thanks to the 4 ... 20-mA input signal, many different pressure sensors can be connected. 

- 4 ... 20-mA measuring signal
- Intelligent storage system
- Connection to a PC via RS232
- Wall mounting for permanent installation
- SD card slot for up to 16GB
- Measurement of three pressure sensors simultaneously
- Sensors must be selected as an option!
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HDM 15
The digital multimeter PCE-HDM 15 is a universal and robust measuring device. With this digital multimeter, voltages, currents, resistances and many other electrical quantities can be measured. As an additional function with the digital multimeter PCE-HDM 15, a Bluetooth connection can be established with a smartphone.

Multimeter with 11 measuring functions
- AC voltage AC V TRMS
- DC voltage DC V
- AC and DC AC + DC TRMS
- AC AC TRMS
- AC and DC AC + DC TRMS
- DC DC A
- Resistance
- Capacity
- Frequency
- Diode test
- Continuity test
- Thermal image
- Bluetooth interface
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RCM 15
The Dust Monitor PCE-RCM 15 is specially designed to monitor the quality of indoor air. Among other things, the Dust Monitor measures the parameters for PM1, PM2.5, PM10, TVOC, formaldehyde, humidity and temperature. 

Measured quantity:
- Formaldehyde: 0 ... 1,999 mg / m³
- TVOC: 0 ... 9,999 mg / m³
- PM1, PM2.5, PM10: 0 ... 999 μg / m³
- Temperature: -10 ... 45°C / 14 ... 113°F (Only displays in °C) 
- Humidity: 20 ... 99% RH
- 3 different display modes
- Alarm function
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RCM 15
The dust particle measuring device PCE-RCM 15 is specially designed to monitor the quality of indoor air. Among other things, the dust particle measuring device the parameters for PM1, PM2.5, PM10, TVOC, formaldehyde, humidity and temperature. 

Measured quantity:
- Formaldehyde: 0 ... 1,999 mg / m³
- TVOC: 0 ... 9,999 mg / m³
- PM1, PM2.5, PM10: 0 ... 999 μg / m³
- Temperature: -10 ... 45°C / 14 ... 113°F (Only displays in °C) 
- Humidity: 20 ... 99% RH
- 3 different display modes
- Alarm function
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HDM 15
The electrical tester PCE-HDM 15 is a universal and robust measuring device. With this electrical tester, voltages, currents, resistances and many other electrical quantities can be measured. As an additional function with the electrical tester PCE-HDM 15, a Bluetooth connection can be established with a smartphone.

Multimeter with 11 measuring functions
- AC voltage AC V TRMS
- DC voltage DC V
- AC and DC AC + DC TRMS
- AC AC TRMS
- AC and DC AC + DC TRMS
- DC DC A
- Resistance
- Capacity
- Frequency
- Diode test
- Continuity test
- Thermal image
- Bluetooth interface
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-320

With the PCE-320 Environmental Meter it is possible to measure climate conditions such as temperature and relative humidity, as well as determining surface temperature of objects simultaneously by using the included external temperature sensor or using an infrared measurement. The Environmental Meter offers features such as average value, maximum, minimum, and hold functions at a reasonable price.


- Internal probe

- Temperature: -20°C ... 60°C / -4 ... 140°F
- Relative humidity: 10 ... 90% r.H.
- Temperature of global: -22°C ... 60°C / -8 ... 140°F
- Humidity: -68°C ... 60°C / -90 ... 140°F
- Dew point temperature: depending on the sensor

- External probe
- Temperature: -50° C ... 500° C / -58 ... 932°F

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PDR 10
The PCE-PDR 10 environmental meter is a pressure measurement gauge. Up to three pressure sensors can be connected to this environmental meter and synchronously read out and logged. Thanks to the 4 ... 20-mA input signal, many different pressure sensors can be connected. 

- 4 ... 20-mA measuring signal
- Intelligent storage system
- Connection to a PC via RS232
- Wall mounting for permanent installation
- SD card slot for up to 16GB
- Measurement of three pressure sensors simultaneously
- Sensors must be selected as an option!
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PH 23
The environmental meter PCE-PH 23 is used for rapid fluid analysis. The environmental meter offers the possibility of determining the temperature and the pH value. The operation of the environmental meter PCE-PH 23 is carried out via the four front-mounted buttons.

- Measuring range pH measurement: 0.00 ... 14.00 pH
- Resolution pH measurement: 0.01 pH
- Measurement accuracy pH measurement: ± 0.02 pH ± 1 digit
- Graphic display
- 1-, 2- or 3-point calibration
- Four front panel buttons
- Memory (Save & Recall)
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RCM 15
The environmental meter PCE-RCM 15 is specially designed to monitor the quality of indoor air. Among other things, the environmental meter measures the parameters for PM1, PM2.5, PM10, TVOC, formaldehyde, humidity and temperature. 

 

Measured quantity:
- Formaldehyde: 0 ... 1,999 mg / m³
- TVOC: 0 ... 9,999 mg / m³
- PM1, PM2.5, PM10: 0 ... 999 μg / m³
- Temperature: -10 ... 45°C / 14 ... 113°F (Only displays in °C) 
- Humidity: 20 ... 99% RH
- 3 different display modes
- Alarm function

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-320

With the PCE-320 Environmental Tester it is possible to measure climate conditions such as temperature and relative humidity, as well as determining surface temperature of objects simultaneously by using the included external temperature sensor or using an infrared measurement. The Environmental Tester offers features such as average value, maximum, minimum, and hold functions at a reasonable price.


- Internal probe

- Temperature: -20°C ... 60°C / -4 ... 140°F
- Relative humidity: 10 ... 90% r.H.
- Temperature of global: -22°C ... 60°C / -8 ... 140°F
- Humidity: -68°C ... 60°C / -90 ... 140°F
- Dew point temperature: depending on the sensor

- External probe
- Temperature: -50° C ... 500° C / -58 ... 932°F

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PDR 10
The PCE-PDR 10 environmental tester is a pressure measurement gauge. Up to three pressure sensors can be connected to this environmental tester and synchronously read out and logged. Thanks to the 4 ... 20-mA input signal, many different pressure sensors can be connected. 

- 4 ... 20-mA measuring signal
- Intelligent storage system
- Connection to a PC via RS232
- Wall mounting for permanent installation
- SD card slot for up to 16GB
- Measurement of three pressure sensors simultaneously
- Sensors must be selected as an option!
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PH 23
The environmental tester PCE-PH 23 is used for rapid fluid analysis. The environmental tester offers the possibility of determining the temperature and the pH value. The operation of the environmental tester PCE-PH 23 is carried out via the four front-mounted buttons.

- Measuring range pH measurement: 0.00 ... 14.00 pH
- Resolution pH measurement: 0.01 pH
- Measurement accuracy pH measurement: ± 0.02 pH ± 1 digit
- Graphic display
- 1-, 2- or 3-point calibration
- Four front panel buttons
- Memory (Save & Recall)
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RCM 15
The environmental tester PCE-RCM 15 is specially designed to monitor the quality of indoor air. Among other things, the environmental tester measures the parameters for PM1, PM2.5, PM10, TVOC, formaldehyde, humidity and temperature. 

Measured quantity:
- Formaldehyde: 0 ... 1,999 mg / m³
- TVOC: 0 ... 9,999 mg / m³
- PM1, PM2.5, PM10: 0 ... 999 μg / m³
- Temperature: -10 ... 45°C / 14 ... 113°F (Only displays in °C) 
- Humidity: 20 ... 99% RH
- 3 different display modes
- Alarm function
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-320

With the PCE-320 Humidity Detector it is possible to measure climate conditions such as temperature and relative humidity, as well as determining surface temperature of objects simultaneously by using the included external temperature sensor or using an infrared measurement. The Humidity Detector offers features such as average value, maximum, minimum, and hold functions at a reasonable price.


- Internal probe

- Temperature: -20°C ... 60°C / -4 ... 140°F
- Relative humidity: 10 ... 90% r.H.
- Temperature of global: -22°C ... 60°C / -8 ... 140°F
- Humidity: -68°C ... 60°C / -90 ... 140°F
- Dew point temperature: depending on the sensor

- External probe
- Temperature: -50° C ... 500° C / -58 ... 932°F

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-320

With the PCE-320 Heat Stress Meter it is possible to measure climate conditions such as temperature and relative humidity, as well as determining surface temperature of objects simultaneously by using the included external temperature sensor or using an infrared measurement. The Heat Stress Meter offers features such as average value, maximum, minimum, and hold functions at a reasonable price.


- Internal probe

- Temperature: -20°C ... 60°C / -4 ... 140°F
- Relative humidity: 10 ... 90% r.H.
- Temperature of global: -22°C ... 60°C / -8 ... 140°F
- Humidity: -68°C ... 60°C / -90 ... 140°F
- Dew point temperature: depending on the sensor

- External probe
- Temperature: -50° C ... 500° C / -58 ... 932°F

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RCM 15
The humidity detector PCE-RCM 15 is specially designed to monitor the quality of indoor air. Among other things, the humidity detector measures the parameters for PM1, PM2.5, PM10, TVOC, formaldehyde, humidity and temperature. 

Measured quantity:
- Formaldehyde: 0 ... 1,999 mg / m³
- TVOC: 0 ... 9,999 mg / m³
- PM1, PM2.5, PM10: 0 ... 999 μg / m³
- Temperature: -10 ... 45°C / 14 ... 113°F (Only displays in °C) 
- Humidity: 20 ... 99% RH
- 3 different display modes
- Alarm function
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-320

With the PCE-320 HVAC Meter it is possible to measure climate conditions such as temperature and relative humidity, as well as determining surface temperature of objects simultaneously by using the included external temperature sensor or using an infrared measurement. The HVAC Meter offers features such as average value, maximum, minimum, and hold functions at a reasonable price.


- Internal probe

- Temperature: -20°C ... 60°C / -4 ... 140°F
- Relative humidity: 10 ... 90% r.H.
- Temperature of global: -22°C ... 60°C / -8 ... 140°F
- Humidity: -68°C ... 60°C / -90 ... 140°F
- Dew point temperature: depending on the sensor

- External probe
- Temperature: -50° C ... 500° C / -58 ... 932°F

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PDR 10
The PCE-PDR 10 HVAC meter is a pressure measurement gauge. Up to three pressure sensors can be connected to this HVAC meter and synchronously read out and logged. Thanks to the 4 ... 20-mA input signal, many different pressure sensors can be connected. 

- 4 ... 20-mA measuring signal
- Intelligent storage system
- Connection to a PC via RS232
- Wall mounting for permanent installation
- SD card slot for up to 16GB
- Measurement of three pressure sensors simultaneously
- Sensors must be selected as an option!
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-T390

The PCE-T390 HVAC meter is a digital device with four input channels for type K and type J temperature sensors and two input channels for PT100 temperature sensors. The PCE-T390 HVAC meter has a SD card slot (from 1 to 16 GB) for storing the measured data. The data is stored in xls format on the SD card of the HVAC meter so that no additional software is needed for further analysis.


- 4 input channels for type-K, J temperature sensors
- 2 input channels for Pt100 temperature sensors
2 x type-K TF-500 temperature sensors are included in the package
- SD card memory (1 ... 16 GB)

 

Manufacturer: PCE Instruments
Test Instruments manufacturer