- AC / DC current, AC voltage and frequency measurement
- Integrated measuring point illumination
- Non-contact voltage tester
- Automatic range selection
- Forceps opening: 18 mm
- Automatic switch-off
- Incl. ISO calibration certificate

The wind measurer has a measuring range of up to 0 ... 30 m/s. In addition to the velocity, the wind measurer can precisely measure the volume flow and temperature. The compact design of the sensors, in combination with the extendable telescopic probe, enable measurements to be taken even in places that are particularly difficult to access.

- Speed: 0.00 ... 30.00 m/s / 0.00 ... 98.42 ft/s
- Volume flow: 0.0 ... 339120.0 m3/h
- Temperature: 0 ... 50 °C / 32 ... 122 °F
- Telescopic probe length: 210 ... 426 mm / 8.2 ... 16.7"
- Telescopic probe diameter: 12 mm / 0.47"

The wind speed meter has a measuring range of up to 0 ... 30 m/s. In addition to the velocity, the wind speed meter can precisely measure the volume flow and temperature. The compact design of the sensors, in combination with the extendable telescopic probe, enable measurements to be taken even in places that are particularly difficult to access.

- Speed: 0.00 ... 30.00 m/s / 0.00 ... 98.42 ft/s
- Volume flow: 0.0 ... 339120.0 m3/h
- Temperature: 0 ... 50 °C / 32 ... 122 °F
- Telescopic probe length: 210 ... 426 mm / 8.2 ... 16.7"
- Telescopic probe diameter: 12 mm / 0.47"

The process controller / temperature controller is a compact PID controller which can be used in a wide range of applications. On the input side, this temperature controller processes the widely used process signals 4 ... 20 mA and 0 ... 10 V as well as resistance sensors and thermocouples. The temperature controller can be used very flexibly, since different operating modes are available. Besides the simple on / off control with adjustable hysteresis, the digital controller also offers various combinations of the PID control. Thanks to the SMART PID control, this temperature controller achieves the setpoint value very quickly and with a slight overshoot.

- Two 4-digit LED displays
- Two output relays
- Front protected to IP65
- Analogue universal input

- Weighing range: 200 kg / 440 lb
- Resolution: 0.1 kg / 3.5 oz
- Accuracy: ± 0.3 kg / 10.5 oz
- Weighing units kg, lb, oz / lb
- Counting function
- incl. ISO Calibration Certificate

- Weighing range: 200 kg / 440 lb
- Resolution: 0.1 kg / 3.5 oz
- Accuracy: ± 0.3 kg / 10.5 oz
- Weighing units kg, lb, oz / lb
- Counting function
- incl. ISO Calibration Certificate

- Weighing range: 200 kg / 440 lb
- Resolution: 0.1 kg / 3.5 oz
- Accuracy: ± 0.3 kg / 10.5 oz
- Weighing units kg, lb, oz / lb
- Counting function
- incl. ISO Calibration Certificate

This round sample cutter features four internal blades for quick, easy and clean cutting of paper, leather, cotton, textiles, cork and more by hand.

- Maximum sample thickness: 3 mm / 0.12"
- Sample cut: 11.3 cm diameter / 100 cm² / 15.5 in²
- Stainless steel blades housed in cast steel casing

- Weighing range: 200 kg / 440 lb
- Resolution: 0.1 kg / 3.5 oz
- Accuracy: ± 0.3 kg / 10.5 oz
- Weighing units kg, lb, oz / lb
- Counting function
- incl. ISO Calibration Certificate

- Weighing range: 200 kg / 440 lb
- Resolution: 0.1 kg / 3.5 oz
- Accuracy: ± 0.3 kg / 10.5 oz
- Weighing units kg, lb, oz / lb
- Counting function
- incl. ISO Calibration Certificate

- Weighing range: 200 kg / 440 lb
- Resolution: 0.1 kg / 3.5 oz
- Accuracy: ± 0.3 kg / 10.5 oz
- Weighing units kg, lb, oz / lb
- Counting function
- incl. ISO Calibration Certificate

- Weighing range: 200 kg / 440 lb
- Resolution: 0.1 kg / 3.5 oz
- Accuracy: ± 0.3 kg / 10.5 oz
- Weighing units kg, lb, oz / lb
- Counting function
- incl. ISO Calibration Certificate

- Weighing range: 200 kg / 440 lb
- Resolution: 0.1 kg / 3.5 oz
- Accuracy: ± 0.3 kg / 10.5 oz
- Weighing units kg, lb, oz / lb
- Counting function
- incl. ISO Calibration Certificate

- Weighing range: 200 kg / 440 lb
- Resolution: 0.1 kg / 3.5 oz
- Accuracy: ± 0.3 kg / 10.5 oz
- Weighing units kg, lb, oz / lb
- Counting function
- incl. ISO Calibration Certificate

PCE-PCM 1 is a multipurpose clamp meter or power analyzer used to measure alternating current (AC), voltage (TRMS) and frequency to determine active (kW), apparent (kVA) and reactive (kVAR) power as well as active energy (kWh) consumption. Both the phase angle and the power factor (cos φ) are shown on the handheld power meter's large and easy-to-read backlit display.

- Voltage (50 ... 200 Hz): 100 / 400 / 750V, ± (1.2% + 5 digits)
- Internal memory: Stores up to 99 measurement values
- Includes USB cable and PC software
- Three-phase power measurement
- True RMS

PCE-PCM 1 is a multipurpose clamp-on tester or power analyzer used to measure alternating current (AC), voltage (TRMS) and frequency to determine active (kW), apparent (kVA) and reactive (kVAR) power as well as active energy (kWh) consumption. Both the phase angle and the power factor (cos φ) are shown on the handheld power meter's large and easy-to-read backlit display.

- Voltage (50 ... 200 Hz): 100 / 400 / 750V, ± (1.2% + 5 digits)
- Internal memory: Stores up to 99 measurement values
- Includes USB cable and PC software
- Three-phase power measurement
- True RMS

- 6 in 1 pH tester
- Measuring range: 0 ... 2000 μS, 2 ... 20 mS
- 3 point pH calibration
- Exchangeable electrodes
- Automatic electrode detection