Industrial Measurement Products and Solutions
Order no.: SLT-TRM

SLT-TRM is a class II (type 2) sound level, sound pressure level (SPL), decibel (dB) or noise meter with audible or visual alarm output capability. SLT-TRM is used for long-term, continuous monitoring of occupational noise exposure limits in industrial environments. AC powered.


- Measuring range: 30 ... 130 dB in 3 ranges
- Resolution: 0.1 dB
- Accuracy: ± 1.5 dB
- IP 54 ingress protection rating on transmitter

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-917

PCE-917 is a portable handheld digital differential pressure gauge, meter or manometer used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-917 features a dust-proof, splash-resistant housing, allowing the meter to be used under adverse conditions.

- ± 5 to 7000 mbar (± 0.05 / 0.1 to 101.5 psi) measuring range
- 10 measurement units: psi, mbar, inH2O, mH2O, inHg, mmHg, Torr, Pa / kPa, atm, kg/cm²
- Optional PC software with RS-232 cable sold separately as a data transfer accessory

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-917

PCE-917 is a portable handheld digital HVAC meter or differential pressure manometer used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-917 features a dust-proof, splash-resistant housing, allowing the meter to be used under adverse conditions.

- ± 5 to 7000 mbar (± 0.05 / 0.1 to 101.5 psi) measuring range
- 10 measurement units: psi, mbar, inH2O, mH2O, inHg, mmHg, Torr, Pa / kPa, atm, kg/cm²
- Optional PC software with RS-232 cable sold separately as a data transfer accessory

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-917

PCE-917 is a portable handheld digital differential pressure manometer used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-917 features a dust-proof, splash-resistant housing, allowing the meter to be used under adverse conditions.

- ± 5 to 7000 mbar (± 0.05 / 0.1 to 101.5 psi) measuring range
- 10 measurement units: psi, mbar, inH2O, mH2O, inHg, mmHg, Torr, Pa / kPa, atm, kg/cm²
- Optional PC software with RS-232 cable sold separately as a data transfer accessory

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-917

PCE-917 is a portable handheld digital differential pressure meter or manometer used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-917 features a dust-proof, splash-resistant housing, allowing the meter to be used under adverse conditions.

- ± 5 to 7000 mbar (± 0.05 / 0.1 to 101.5 psi) measuring range
- 10 measurement units: psi, mbar, inH2O, mH2O, inHg, mmHg, Torr, Pa / kPa, atm, kg/cm²
- Optional PC software with RS-232 cable sold separately as a data transfer accessory

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-917

PCE-917 is a portable handheld digital differential pressure vacuum gauge, meter or manometer used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-917 features a dust-proof, splash-resistant housing, allowing the meter to be used under adverse conditions.

- ± 5 to 7000 mbar (± 0.05 / 0.1 to 101.5 psi) measuring range
- 10 measurement units: psi, mbar, inH2O, mH2O, inHg, mmHg, Torr, Pa / kPa, atm, kg/cm²
- Optional PC software with RS-232 cable sold separately as a data transfer accessory

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: T593

The distance meter of high accuracy is ideal to measure level surfaces like streets, ways or roads. Its rugged construction makes it resistant to adverse climatologic conditions and other environmental conditions. The wheel measures automatically up to 9999.9 meters.


- Measurement range: 9999.9 m (only displays metric)
- Reading: 1 cm
- Tolerance: < 0.02 %
- Wheel diameter: 318.5 mm (=  1m perimeter)
- Wheel type: metal wheel
- Weight: 4100 g

 

Manufacturer: Gottlieb Nestle GmbH
Test Instruments manufacturer
Order no.: PCE-C-R10LFC

Thanks to its small dimensions, the miniature force sensor is easy to use on hard-to-reach measuring points. The height in particular is something special with this force sensor. With a diameter of only 10 mm, this force sensor is smaller in diameter than a 1 cent coin.

 

- Rated load / force F.S.: 5-100 kg / 50-1000 N
- Limit load / force: 120 %
- Breaking load / force: 150 %
- Rated output: 1.0 – 1.5 mV/V

- Force sensor nominal load selectable!

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-C-R13LFC-H7

A force sensor made of stainless steel with a measurement uncertainty of only 0.5%. With the dimensions of Ø 13 mm and a height of 7 mm, the force sensor is very versatile. 

 

- Rated load / force F.S.: 5-100 kg / 50-1000 N
- Limit load / force: 120 %
- Breaking load / force: 150 %
- Rated output: 1.0 – 1.5 mV/V

- Force sensor nominal load selectable!

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-C-R19LFC-H9

This is a pressure cell as a force sensor with a high measuring range with small dimensions. The dimensions of the force sensor are only 9 mm in height and 19 mm in diameter. 

 

- Rated load / force F.S.: 5-500 kg / 50-5000N
- Limit load / force: 120 %
- Breaking load / force: 150 %
- Rated output: 1.0 – 1.5 mV/V

- Force sensor nominal load selectable!

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-C-R8LFC

The miniature force sensor can be used in many applications due to its compact dimensions. With a small force application surface, the miniature force transducer enables force measurement at small contact surfaces.

 

- Rated load / force F.S.: 10-50 kg / 100-500 N
- Limit load / force: 150 %
- Breaking load / force: 200 %
- Rated output: 1.0 – 1.5 mV/V

- Force sensor nominal load selectable!

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: MPC-3

This round sample cutter features four internal blades for quick, easy and clean cutting of paper, leather, cotton, textiles, cork and more by hand.


- Maximum sample thickness: 3 mm / 0.12"
- Sample cut: 11.3 cm diameter / 100 cm² / 30 in²
- Stainless steel blades housed in cast steel casing

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: SLT-TRM

SLT-TRM is a class II (type 2) sound meter, sound pressure level (SPL), decibel (dB) or noise meter with audible or visual alarm output capability. SLT-TRM is used for long-term, continuous monitoring of occupational noise exposure limits in industrial environments. AC powered.


- Measuring range: 30 ... 130 dB in 3 ranges
- Resolution: 0.1 dB
- Accuracy: ± 1.5 dB
- IP 54 ingress protection rating on transmitter

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: MPC-3

This round sample cutter features four internal blades for quick, easy and clean cutting of paper, leather, cotton, textiles, cork and more by hand.


- Maximum sample thickness: 3 mm / 0.12"
- Sample cut: 11.3 cm diameter / 100 cm² / 30 in²
- Stainless steel blades housed in cast steel casing


Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-917

PCE-917 is a portable handheld digital differential pressure meter or manometer used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-917 features a dust-proof, splash-resistant housing, allowing the meter to be used under adverse conditions.

- ± 5 to 7000 mbar (± 0.05 / 0.1 to 101.5 psi) measuring range
- 10 measurement units: psi, mbar, inH2O, mH2O, inHg, mmHg, Torr, Pa / kPa, atm, kg/cm²
- Optional PC software with RS-232 cable sold separately as a data transfer accessory

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: SLT-TRM

The class 2 (type 2) sound level meter SLT-TRM is a noise meter, sound pressure level (SPL), or decibel (dB) meter with an audible or visual alarm. Used for long-term measurement of occupational noise exposure limits, the sound level meter SLT-TRM is an effective device across the industry spectrum. 


- Class 2
- Measuring range: 30 ... 130 dB in 3 ranges
- Resolution: 0.1 dB
- Accuracy: ±1.5 dB
- Frequency weighting: A
- Time weighting: Fast
- Output: 4 ... 20 mA
- IP 54 ingress protection rating on transmitter

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-FST-200-201-H-I

The air flow meter is compatible with and can be mounted on to a wide variety of available measuring equipment. The sensor will detect even the minutest movements of air and the results are then output in analogue form. With heating.


- Output signal: 4 … 20-mA  
- Operating voltage: 12 … 36V DC
- Measurement reading range: 0.5 m/s … 50 m/s (1.1 ... 111.8 mph)

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-FST-200-201-H-U

The air flow meter is compatible with and can be mounted on to a wide variety of available measuring equipment. The sensor will detect even the minutest movements of air and the results are then output in analogue form. With heating.


- Output signal: 0 … 10V
- Operating voltage: 12 … 36V DC
- Measurement reading range: 0.5 m/s … 50 m/s (1.1 ... 111.8 mph)

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-FST-200-202-H-I

The air flow meter measures the direction of wind and the results are then output in analogue form. The sensor is compatible with and can be mounted on to a wide variety of available measuring equipment. With heating.


- Output signal: 4 … 20-mA
- Operating voltage: 12 … 36V DC
- Measurement reading range: 0 … 360°

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-FST-200-202-H-U

The air flow meter measures the direction of wind and the results are then output in analogue form. The sensor is compatible with and can be mounted on to a wide variety of available measuring equipment. With heating.


- Output signal: 0 … 10V DC
- Operating voltage: 12 … 36V DC
- Measurement reading range: 0 … 360°

Manufacturer: PCE Instruments
Test Instruments manufacturer