Material Surface Roughness Tester PCE-RT 2000
£ 1,709.00
Price excl. VAT &. delivery

The material surface roughness tester PCE-RT 2000 is used for accurate measurement of surface roughness. The material tester can be used on all surfaces. The roughness is measured precisely with the roughness measuring device via the piezo probe.

  • Measuring ranges Ra, Rq, Rc: 0.005 µm … 16 µm / 0.197 µinch … 629.9 µinch
  • Measurement accuracy: <± 10%
  • Micro USB interface
  • 3 different cut-off wavelengths
  • PC software

Paint Roughness Tester PCE-RT 2000
£ 1,709.00
Price excl. VAT &. delivery

The roughness tester PCE-RT 2000 is used for accurate measurement of surface roughness. The roughness tester can be used on all surfaces. The roughness is measured precisely with the roughness measuring device via the piezo probe.

  • Measuring ranges Ra, Rq, Rc: 0.005 µm … 16 µm / 0.197 µinch … 629.9 µinch
  • Measurement accuracy: <± 10%
  • Micro USB interface
  • 3 different cut-off wavelengths
  • PC software

Profilometer PCE-RT 2000
£ 1,709.00
Price excl. VAT &. delivery
The profilometer PCE-RT 2000 is used for accurate measurement of surface roughness. The profilometer PCE-RT 2000 can be used on all surfaces. The roughness with the profilometer is precisely recorded via the piezo probe. The profilometer PCE-RT 2000 can be purchased here in our online shop.

  • Measures Ra, Rq, Rsm, Rsk, Rz, Rt, Rp, Rv, Rc in both Metric (µm) and Imperial (µinch)
  • Ra, Rq, Rc : 0.005 μm…16 μm / 0.197 µinch … 629.921 µinch measurement range
  • Rz, Rt Rp, Rv: 0.020 µm … 200 µm / 0.797 µinch … 7874.016 µinch measurement range
  • Rsm: 5 μm …1000 μm / 1968 µinch … 3937 µinch measurement range
  • Rsk: -1 …. 1 measurement range
  • Measurement accuracy: <± 10% and Repeatability < 6%
  • Robust Piezoelectric sensor
  • Saves up to 20 Data points
  • 3 different cutoff wavelengths
  • Micro USB Interface
  • PC Software
  • Built-in rechargeable li-ion battery
Roughness Tester PCE-RT 2000
£ 1,709.00
Price excl. VAT &. delivery

The roughness tester PCE-RT 2000 is used for accurate measurement of surface roughness. The roughness tester can be used on all surfaces. The roughness is measured precisely with the roughness measuring device via the piezo probe.

  • Measuring ranges Ra, Rq, Rc: 0.005 µm … 16 µm / 0.197 µinch … 629.9 µinch
  • Measurement accuracy: <± 10%
  • Micro USB interface
  • 3 different cut-off wavelengths
  • PC software

Surface Tester PCE-RT 2000
£ 1,709.00
Price excl. VAT &. delivery
The surface tester PCE-RT 2000 is used for accurate measurement of surface roughness. The surface tester PCE-RT 2000 can be used on all surfaces. The roughness with the roughness measuring device is precisely recorded via the piezo probe. The surface tester PCE-RT 2000 can be purchased here in our online shop.

  • Measures Ra, Rq, Rsm, Rsk, Rz, Rt, Rp, Rv, Rc in both Metric (µm) and Imperial (µinch)
  • Ra, Rq, Rc : 0.005 μm…16 μm / 0.197 µinch … 629.921 µinch measurement range
  • Rz, Rt Rp, Rv: 0.020 µm … 200 µm / 0.797 µinch … 7874.016 µinch measurement range
  • Rsm: 5 μm …1000 μm / 1968 µinch … 3937 µinch measurement range
  • Rsk: -1 …. 1 measurement range
  • Measurement accuracy: <± 10% and Repeatability < 6%
  • Robust Piezoelectric sensor
  • Saves up to 20 Data points
  • 3 different cutoff wavelengths
  • Micro USB Interface
  • PC Software
  • Built-in rechargeable li-ion battery
Clamp-on Ultrasonic Flow Meter PCE-TDS 75-ICA incl. ISO Calibration Certificate
£ 1,706.00
Price excl. VAT &. delivery
ISO Calibration
The Clamp-on Ultrasonic Flow Meter is a fixed installation meter. The flow rate of liquids in pipes can be determined with this flow meter. The sensors from the Clamp-on Ultrasonic Flow Meter can be mounted directly on the pipes to be measured without having to cut them open. The flow velocity is calculated using the transit-time principle which requires the solid impurities be less than 5% for accuracy.

  • Measuring range: ± 0.03 … ± 5 m / s
  • Measuring accuracy: ± 1% of the measured value
  • Pipe diameter: 25 … 1200 mm (1 … 48 in)
  • Interface: RS232 & RS485
  • Relay output
  • incl. ISO Calibration Certificate
Ultrasonic Flow Meter PCE-TDS 75-ICA incl. ISO Calibration Certificate
£ 1,706.00
Price excl. VAT &. delivery
ISO Calibration
The ultrasonic flow meter is a fixed installation meter. The flow rate of liquids in pipes can be determined with this flow meter. The sensors from the ultrasonic flow meter can be mounted directly on the pipes to be measured without having to cut them open. The flow velocity is calculated using the transit-time principle which requires the solid impurities be less than 5% for accuracy.

  • Measuring range: ± 0.03 … ± 5 m / s
  • Measuring accuracy: ± 1% of the measured value
  • Pipe diameter: 25 … 1200 mm (1 … 48 in)
  • Interface: RS232 & RS485
  • Relay output
  • incl. ISO Calibration Certificate
Ultrasonic Flow Meter PCE-TDS 75-ICA incl. ISO Calibration Certificate
£ 1,706.00
Price excl. VAT &. delivery
ISO Calibration
The ultrasonic flow meter is a fixed installation meter. The flow rate of liquids in pipes can be determined with this flow meter. The sensors from the ultrasonic flow meter can be mounted directly on the pipes to be measured without having to cut them open. The flow velocity is calculated using the transit-time principle which requires the solid impurities be less than 5% for accuracy.

  • Measuring range: ± 0.03 … ± 5 m / s
  • Measuring accuracy: ± 1%  (of the measured value)
  • Pipe size: DN 25 … 1200 mm
  • Interface: RS232 & RS485
  • Relay output
  • incl. ISO Calibration Certificate
Ultrasonic Flow Tester PCE-TDS 75-ICA incl. ISO Calibration Certificate
£ 1,706.00
Price excl. VAT &. delivery
ISO Calibration
The ultrasonic flow tester is a fixed installation meter. The flow rate of liquids in pipes can be determined with this flow tester. The sensors from the ultrasonic flow tester can be mounted directly on the pipes to be measured without having to cut them open. The flow velocity is calculated using the transit-time principle which requires the solid impurities be less than 5% for accuracy.

  • Measuring range: ± 0.03 … ± 5 m / s
  • Measuring accuracy: ± 1% of the measured value
  • Pipe diameter: 25 … 1200 mm (1 … 48 in)
  • Interface: RS232 & RS485
  • Relay output
  • incl. ISO Calibration Certificate