- Measuring range: 0 ... 60 kg / 0 ... 132 lbs
- Resolution: 20 g
- Accuracy: ± 1% of full scale
- Units: kg, lb, N
- Including shackles and hooks
- incl. ISO Calibration Certificate

The panel indicator PCE-N30U can process several different input signals, such as 0...410/4010 Ohm, -10...+63 mV DC, -13...+13 V DC, -24...+24 mA DC or signals from thermocouples and resistance thermometers. This makes the panel indicator applicable in a wide range of applications. The measured values are shown on the large LED display of the PCE-N30U.

- 21-point scaling
- IP 65 protection on the front
- Three-colored display
- Two alarm outputs

The power indicator PCE-N30U can process several different input signals, such as 0...410/4010 Ohm, -10...+63 mV DC, -13...+13 V DC, -24...+24 mA DC or signals from thermocouples and resistance thermometers. This makes the power indicator applicable in a wide range of applications. The measured values are shown on the large LED display of the PCE-N30U.

- 21-point scaling
- IP 65 protection on the front
- Three-colored display
- Two alarm outputs

The pressure gauge PCE-N30U can process several different input signals, such as 0...410/4010 Ohm, -10...+63 mV DC, -13...+13 V DC, -24...+24 mA DC or signals from thermocouples and resistance thermometers. This makes the pressure gauge applicable in a wide range of applications. The measured values are shown on the large LED display of the PCE-N30U.

- 21-point scaling
- IP 65 protection on the front
- Three-colored display
- Two alarm outputs

The pressure indicator PCE-N30U can process several different input signals, such as 0...410/4010 Ohm, -10...+63 mV DC, -13...+13 V DC, -24...+24 mA DC or signals from thermocouples and resistance thermometers. This makes the pressure indicator applicable in a wide range of applications. The measured values are shown on the large LED display of the PCE-N30U.

- 21-point scaling
- IP 65 protection on the front
- Three-colored display
- Two alarm outputs

The process indicator PCE-N30U can process several different input signals, such as 0...410/4010 Ohm, -10...+63 mV DC, -13...+13 V DC, -24...+24 mA DC or signals from thermocouples and resistance thermometers. This makes the process indicator applicable in a wide range of applications. The measured values are shown on the large LED display of the PCE-N30U.

- 21-point scaling
- IP 65 protection on the front
- Three-colored display
- Two alarm outputs

The temperature indicator PCE-N30U can process several different input signals, such as 0...410/4010 Ohm, -10...+63 mV DC, -13...+13 V DC, -24...+24 mA DC or signals from thermocouples and resistance thermometers. This makes the digital universal indicator applicable in a wide range of applications. The measured values are shown on the large LED display of the PCE-N30U.

- 21-point scaling
- IP 65 protection on the front
- Three-colored display
- Two alarm outputs

The voltage indicator PCE-N30U can process several different input signals, such as 0...410/4010 Ohm, -10...+63 mV DC, -13...+13 V DC, -24...+24 mA DC or signals from thermocouples and resistance thermometers. This makes the voltage indicator applicable in a wide range of applications. The measured values are shown on the large LED display of the PCE-N30U.

- 21-point scaling
- IP 65 protection on the front
- Three-colored display
- Two alarm outputs

- Measuring range: 0 ... 60 kg / 0 ... 132 lbs
- Resolution: 20 g
- Accuracy: ± 1% of full scale
- Units: kg, lb, N
- Including shackles and hooks
- incl. ISO Calibration Certificate

Clamp on tester for measuring AC/DC current, AC voltage and resistance. This clamp on tester is designed to indirectly detect AC/DC current and ohms. The clamp on tester has white LEDs which illuminate the point of measurement and test the voltage without contact. Small dimensions of this device allow to take measurements in places with limited access. The clamp on tester comes manufacturer calibrated and can optionally be certified according to ISO or standards.

- AC / DC current, voltage and resistance measurement
- 3 2/3-digit LCD display
- Power supply: 2 x 1.5V AAA battery
- Dimensions: 164 x 65 x 32 mm / 6.4 x 2.5 x 1.2 in
- Incl. ISO Calibration Certificate

Current clamp for measuring AC/DC current, AC voltage and resistance. This current clamp is designed to indirectly detect AC/DC current and ohms. The current clamp has white LEDs which illuminate the point of measurement and test the voltage without contact. Small dimensions of this device allow to take measurements in places with limited access. The current clamp comes manufacturer calibrated and can optionally be certified according to ISO or standards.

- AC / DC current, voltage and resistance measurement
- 3 2/3-digit LCD display
- Power supply: 2 x 1.5V AAA battery
- Dimensions: 164 x 65 x 32 mm / 6.4 x 2.5 x 1.2 in
- Incl. ISO Calibration Certificate

Digital Clamp Meter for measuring AC/DC current, AC voltage and resistance. This clamp meter is designed to indirectly detect AC/DC current and ohms. The clamp has white LEDs which illuminate the point of measurement and test the voltage without contact. Small dimensions of this device allow to take measurements in places with limited access. The clamp meter comes manufacturer calibrated and can optionally be certified according to ISO or standards.

- AC / DC current, voltage and resistance measurement
- 3 2/3-digit LCD display
- Power supply: 2 x 1.5V AAA battery
- Dimensions: 164 x 65 x 32 mm / 6.4 x 2.5 x 1.2 in
- Incl. ISO Calibration Certificate

Digital Multimeter for measuring AC/DC current, AC voltage and resistance. This digital multimeter is designed to indirectly detect AC/DC current and ohms. The multimeter  has white LEDs which illuminate the point of measurement and test the voltage without contact. Small dimensions of this device allow to take measurements in places with limited access. The multimeter comes manufacturer calibrated and can optionally be certified according to ISO or standards.

- AC / DC current, voltage and resistance measurement
- 3 2/3-digit LCD display
- Power supply: 2 x 1.5V AAA battery
- Dimensions: 164 x 65 x 32 mm / 6.4 x 2.5 x 1.2 in
- Incl. ISO Calibration Certificate

Electrical tester for measuring AC/DC current, AC voltage and resistance. This electrical tester is designed to indirectly detect AC/DC current and ohms. The electrical tester has white LEDs which illuminate the point of measurement and test the voltage without contact. Small dimensions of this device allow to take measurements in places with limited access. The electrical tester comes manufacturer calibrated and can optionally be certified according to ISO or standards.

- AC / DC current, voltage and resistance measurement
- 3 2/3-digit LCD display
- Power supply: 2 x 1.5V AAA battery
- Dimensions: 164 x 65 x 32 mm / 6.4 x 2.5 x 1.2 in
- Incl. ISO Calibration Certificate

HVAC meter for measuring AC/DC current, AC voltage and resistance. This HVAC meter is designed to indirectly detect AC/DC current and ohms. The HVAC meter has white LEDs which illuminate the point of measurement and test the voltage without contact. Small dimensions of this device allow to take measurements in places with limited access. The HVAC meter comes manufacturer calibrated and can optionally be certified according to ISO or standards.

- AC / DC current, voltage and resistance measurement
- 3 2/3-digit LCD display
- Power supply: 2 x 1.5V AAA battery
- Dimensions: 164 x 65 x 32 mm / 6.4 x 2.5 x 1.2 in
- Incl. ISO Calibration Certificate

The Analytical Balance PCE-BS 3000 is a light, rugged precision balance suitable for different purposes. The removable stainless steel pan allows the laboratory balance to be cleaned easily. The Analytical Balance PCE-BS 3000 can be used for weighing as well as for piece counting.

- Weighing capacity: Max. 3000 g
- Readability (g): 0.1
- Repeatability (g): 0.1
- Calibratable
- Incl. ISO calibration certificate

The Benchtop Scale PCE-BS 3000 is a light, rugged precision scale suitable for different purposes. The removable stainless steel pan allows the laboratory scale to be cleaned easily. The Benchtop Scale PCE-BS 3000 can be used for weighing as well as for piece counting.

- Weighing capacity: Max. 3000 g
- Readability (g): 0.1
- Repeatability (g): 0.1
- Calibratable
- Incl. ISO calibration certificate

The temperature / humidity climate meter is a data logger has a memory of 20,010 sets of measurements and allows use of up to several months. The temperature / humidity climate meter is particularly suitable for measuring tasks where it is not possible for the user to install software for reading the measured values.

- Measuring range temp.: -30 ... 60 °C / -22 ... 140 °F
- Measuring range rel. humidity: 0 ... 100% RH
- Measurement protocol as PDF
- Data export possible as CSV
- Readable without software
- 20,010 sets of measured values can be stored
- incl. ISO Calibration Certificate

The Compact Balance PCE-BS 3000 is a light, rugged precision balance suitable for different purposes. The removable stainless steel pan allows the laboratory balance to be cleaned easily. The Compact Balance PCE-BS 3000 can be used for weighing as well as for piece counting.

 

- Weighing capacity: Max. 3000 g
- Readability (g): 0.1
- Repeatability (g): 0.1
- Calibratable
- Incl. ISO calibration certificate

 

 

The Counting Scale is a light, rugged precision balance suitable for different purposes. The removable stainless steel pan allows the laboratory balance to be cleaned easily. The Counting Scale can be used for weighing as well as for piece counting.

- Weighing capacity: Max. 3000 g
- Readability (g): 0.1
- Repeatability (g): 0.1
- Incl. ISO calibration certificate