The profilometer - roughness tester PCE-RT 1200-ICA is used to determine surface roughness. The compact profilometer is a handheld device for mobile use. Due to the power supply via a powerful battery, it can be used directly on site. The profilometer is used in the laboratory, in production and everywhere where the roughness of surfaces is to be determined.

• Measures Ra, Rz, Rq and Rt in Metric (µm) and Imperial (µinch)
• Ra, Rq: 0.005 … 16.00 μm / 0.197 µinch… 629.921 µinch measurement range
• Rz, Rt: 0.002 … 200.0 μm / 0.079 µinch… 7874.016 µinch measurement range
• Induction method with Diamond sensor
• Large OLED display
• Display for the position of the probe
• Micro-USB interface
• incl. ISO Calibration Certificate

• Measures Ra, Rz, Rq and Rt in Metric (µm) and Imperial (µinch)
• Ra, Rq: 0.005 … 16.00 μm / 0.197µinch… 629.921 µinch measurement range
• Rz, Rt: 0.002 … 200.0 μm / 0.079µinch… 7874.016 µinch measurement range
• Induction method with Diamond sensor
• Accuracy < ± 10% and Repeatability < 6%
• Saves up to 20 Data points
• Micro-USB interface
• Built-in rechargeable li-ion battery
• Incl. ISO calibration certificate

• Measures Ra, Rz, Rq and Rt in Metric (µm) and Imperial (µinch)
• Ra, Rq: 0.005 … 16.00 μm / 0.197µinch… 629.921 µinch measurement range
• Rz, Rt: 0.002 … 200.0 μm / 0.079µinch… 7874.016 µinch measurement range
• Induction method with Diamond sensor
• Accuracy < ± 10% and Repeatability < 6%
• Saves up to 20 Data points
• Micro-USB interface
• Built-in rechargeable li-ion battery
• Incl. ISO calibration certificate

The durometer PCE-2900 has been developed for hardness measurements on metallic materials. The durometer PCE-2900 measures the material hardness in Vickers, Brinell, Rockwell, Leeb and Shore. The durometer PCE-2900 measures the hardness according to the Leeb rebound principle. 

• Measurement according to Leeb Rebound method
• Measurement units: HLD, HRA, HRB, HRC, HB, HV, HS
• Measurement ranges: 170-960 HLD, 59.1-88 HRA, 3.5-101.7 HRB, 17.9-69.5 HRC, 19-683 HB, 80-1042 HV, 30.6-102.6 HS 
• Accuracy: ± 0.5%, Repeatability: ± 0.6%
• Impactor: Type D
• USB and WiFi for data transmission

The hardness tester PCE-2900 has been developed for hardness measurements on metallic materials. The hardness tester PCE-2900 measures the material hardness in Vickers, Brinell, Rockwell, Leeb and Shore. The hardness tester PCE-2900 measures the hardness according to the Leeb rebound principle. 

• Measurement according to Leeb Rebound method
• Measurement units: HLD, HRA, HRB, HRC, HB, HV, HS
• Measurement ranges: 170-960 HLD, 59.1-88 HRA, 3.5-101.7 HRB, 17.9-69.5 HRC, 19-683 HB, 80-1042 HV, 30.6-102.6 HS 
• Accuracy: ± 0.5%, Repeatability: ± 0.6%
• Impactor: Type D
• USB and WiFi for data transmission

The material hardness tester PCE-2900 has been developed for hardness measurements on metallic materials. The material hardness tester PCE-2900 measures the material hardness in Vickers, Brinell, Rockwell, Leeb and Shore. The material hardness tester PCE-2900 measures the hardness according to the Leeb rebound principle. 

• Measurement according to Leeb Rebound method
• Measurement units: HLD, HRA, HRB, HRC, HB, HV, HS
• Measurement ranges: 170-960 HLD, 59.1-88 HRA, 3.5-101.7 HRB, 17.9-69.5 HRC, 19-683 HB, 80-1042 HV, 30.6-102.6 HS 
• Accuracy: ± 0.5%, Repeatability: ± 0.6%
• Impactor: Type D
• USB and WiFi for data transmission

The hardness tester PCE-2900 has been developed for hardness measurements on metallic materials. The hardness tester PCE-2900 measures the material hardness in Vickers, Brinell, Rockwell, Leeb and Shore. The hardness tester PCE-2900 measures the hardness according to the Leeb rebound principle. 

• Measurement according to Leeb Rebound method
• Measurement units: HLD, HRA, HRB, HRC, HB, HV, HS
• Measurement ranges: 170-960 HLD, 59.1-88 HRA, 3.5-101.7 HRB, 17.9-69.5 HRC, 19-683 HB, 80-1042 HV, 30.6-102.6 HS 
• Accuracy: ± 0.5%, Repeatability: ± 0.6%
• Impactor: Type D
• USB and WiFi for data transmission

The hardness tester PCE-2900 has been developed for hardness measurements on metallic materials. The hardness tester PCE-2900 measures the material hardness in Vickers, Brinell, Rockwell, Leeb and Shore. The hardness tester PCE-2900 measures the hardness according to the Leeb rebound principle. 

• Measurement according to Leeb Rebound method
• Measurement units: HLD, HRA, HRB, HRC, HB, HV, HS
• Measurement ranges: 170-960 HLD, 59.1-88 HRA, 3.5-101.7 HRB, 17.9-69.5 HRC, 19-683 HB, 80-1042 HV, 30.6-102.6 HS 
• Accuracy: ± 0.5%, Repeatability: ± 0.6%
• Impactor: Type D
• USB and WiFi for data transmission

PCE-WSB 1 is a portable handheld battery-powered brightness / whiteness color meter used to measure the brightness level of paper, cardboard, cellulose, pulp, textiles, paint, enamel, plastic, porcelain, cement, concrete, building materials, chemicals, powders, talc, starch, flour, salt, detergents, cosmetics and other non-metal substances.

• Measures the whiteness degree of blue light (Wb = R457)
• Meets ISO 2470 and ISO 3688 standards
• Compact, lightweight and user-friendly
• Resolution: 0.1
• Repeat accuracy : ±0.1

PCE-WSB 1 is a portable handheld battery-powered brightness / whiteness colorimeter used to measure the brightness level of paper, cardboard, cellulose, pulp, textiles, paint, enamel, plastic, porcelain, cement, concrete, building materials, chemicals, powders, talc, starch, flour, salt, detergents, cosmetics and other non-metal substances.

• Measures the whiteness degree of blue light (Wb = R457)
• Meets ISO 2470 and ISO 3688 standards
• Compact, lightweight and user-friendly
• Resolution: 0.1
• Repeat accuracy : ±0.1

PCE-WSB 1 is a portable handheld battery-powered brightness tester or whiteness color meter used to measure the brightness level of paper, cardboard, cellulose, pulp, textiles, paint, enamel, plastic, porcelain, cement, concrete, building materials, chemicals, powders, talc, starch, flour, salt, detergents, cosmetics and other non-metal substances.

• Measures the whiteness degree of blue light (Wb = R457)
• Meets ISO 2470 and ISO 3688 standards
• Compact, lightweight and user-friendly
• Resolution: 0.1
• Repeat accuracy : ±0.1

The paint testing equipment is used to measure the brightness level of paper, cardboard, cellulose, pulp, textiles, paint, enamel, plastic, porcelain, cement, concrete, building materials, chemicals, powders, talc, starch, flour, salt, detergents, cosmetics and other non-metal substances.

• Measures the whiteness degree of blue light (Wb = R457)
• Meets ISO 2470 and ISO 3688 standards
• Compact, lightweight and user-friendly
• Resolution: 0.1
• Repeat accuracy : ±0.1

PCE-WSB 1 is a portable handheld battery-powered surface testing - brightness / whiteness color meter used to measure the brightness level of paper, cardboard, cellulose, pulp, textiles, paint, enamel, plastic, porcelain, cement, concrete, building materials, chemicals, powders, talc, starch, flour, salt, detergents, cosmetics and other non-metal substances.

• Measures the whiteness degree of blue light (Wb = R457)
• Meets ISO 2470 and ISO 3688 standards
• Compact, lightweight and user-friendly
• Resolution: 0.1
• Repeat accuracy : ±0.1

PCE-WSB 1 is a portable handheld battery-powered whiteness meter used to measure the brightness level of paper, cardboard, cellulose, pulp, textiles, paint, enamel, plastic, porcelain, cement, concrete, building materials, chemicals, powders, talc, starch, flour, salt, detergents, cosmetics and other non-metal substances.

• Measures the whiteness degree of blue light (Wb = R457)
• Meets ISO 2470 and ISO 3688 standards
• Compact, lightweight and user-friendly
• Resolution: 0.1
• Repeat accuracy : ±0.1

The PCE-VM 21 consists of an optical microscope, CCD camera and LCD screen. Due to the 75-fold magnification, it is possible to view very small parts, electronics and even medical instruments very clearly. The PCE-VM 21 inspection camera reduces eye strain during soldering of printed circuit boards (PCBs), investigating of material defects on metal surfaces, and inspecting surgical implements for reprocessing, making the PCE-VM 21 industrial, healthcare or food / hygiene microscope a vital addition to your plant, shop, production line, quality assurance laboratory or instrument reprocessing clean room. The PCE-VM 21 quality assurance microscope offers:

• Continuous magnification from 10 … 75 times
• Adjustable height for viewing of larger objects
• Transmitted light and incident light illumination

The PCE-VM 21 consists of an optical microscope, CCD camera and LCD screen. Due to the 75-fold magnification, it is possible to view very small parts, electronics and even medical instruments very clearly. The PCE-VM 21 inspection microscope reduces eye strain during soldering of printed circuit boards (PCBs), investigating of material defects on metal surfaces, and inspecting surgical implements for reprocessing, making the PCE-VM 21 industrial, healthcare or food / hygiene microscope a vital addition to your plant, shop, production line, quality assurance laboratory or instrument reprocessing clean room. The PCE-VM 21 quality assurance microscope offers:

• Continuous magnification from 10 … 75 times
• Adjustable height for viewing of larger objects
• Transmitted light and incident light illumination

• flow rate: 0.03 ... 5 m/s
• accuracy: ±2 % of Rd
• resolution: 0.01 m/s
• repeatability: 0.2 %
• display of the volume flow
• for copper pipes
• pipe size: DN80 (72 ... 80 mm)

• flow rate: 0.03 ... 5 m/s
• accuracy: ±2 % of Rd
• resolution: 0.01 m/s
• repeatability: 0.2 %
• display of the volume flow
• for PVC pipes
• pipe size: DN80 (83 ... 91 mm)