Industrial Measurement Products and Solutions
Order no.: PCE-CRC 10
The Adhesion Tester PCE-CRC 10 is designed to determine the quality of the adhesion of coatings. The Adhesion Tester is suitable for thin, thick or tough coatings on all surfaces. Since the adherence of paintings and other coatings is a crucial product and quality characteristic for their protective effect, adhesion testers are used in a wide range of industries.

 

- Evaluation of adhesion
- For thin, thick or tough coatings
- Large, non-slip grip
- Various blades selectable

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PI 10
The condition monitoring digital multimeter PCE-PI 10 is used to determine the direction of rotation of 3-phase voltage networks. Furthermore, the condition monitoring digital multimeter is able to measure voltages up to 600V AC / DC. The rotating field direction is important for machines and plants.

- Measuring range: 75 ... 600V AC
- 3-phase rotating field detection
- AC / DC voltage measurement
- CAT III 600V
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-353N-ICA
The condition monitoring sound meter is a sound meter with an adjustable measuring range of 30 ... 130 dB. The measured values ​​are displayed on the condition monitoring sound meter on the one hand as a normal numerical value and on the other hand also graphically in the measuring range set by the user.

- Measuring range: 30 ... 130 dB, 35 ... 130 dBC
- Measurement functions: Lp, LAeq, LAe, LCpeak
- Accuracy: ± 1.5 dB (at 1 KHz and 94 dB)
- Frequency weighting: A and C
- Class 2
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DMS 310
These counting scales were specially designed for the measurement of basis weight. Thanks to this counting scale, basis weight measurements can be carried out and evaluated within a very short time. 

- Measuring range: 0 ... 310 g / 0 ... 31,000 g / m²
- Resolution: 0.01 g / 1 g / m²
- RS-232 interface
- Piece counting function, weight per unit area
- Battery operation for mobile use
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-910

PCE-910 is a portable handheld digital differential pressure gauge, meter or manometer used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-910 features a dust-proof, splash-resistant housing, allowing the meter to be used under adverse conditions.

- Pressure measuring range: ± 200 kPa / ± 29 psi / ± 2 bar
- Resolution: 100 Pa / 0.0145 psi / 0.001 bar
- 10 measurement units: psi, mbar, inH2O, mH2O, inHg, mmHg, Torr, Pa / kPa, atm, kg/cm²
- Optional PC software with RS-232 cable sold separately as a data transfer accessory

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-910

PCE-910 is a portable handheld digital differential pressure manometer used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-910 features a dust-proof, splash-resistant housing, allowing the meter to be used under adverse conditions.

- Pressure measuring range: ± 200 kPa / ± 29 psi / ± 2 bar
- Resolution: 100 Pa / 0.0145 psi / 0.001 bar
- 10 measurement units: psi, mbar, inH2O, mH2O, inHg, mmHg, Torr, Pa / kPa, atm, kg/cm²
- Optional PC software with RS-232 cable sold separately as a data transfer accessory

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-910

PCE-910 is a portable handheld digital differential pressure meter or manometer used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-910 features a dust-proof, splash-resistant housing, allowing the meter to be used under adverse conditions.

- Pressure measuring range: ± 200 kPa / ± 29 psi / ± 2 bar
- Resolution: 100 Pa / 0.0145 psi / 0.001 bar
- 10 measurement units: psi, mbar, inH2O, mH2O, inHg, mmHg, Torr, Pa / kPa, atm, kg/cm²
- Optional PC software with RS-232 cable sold separately as a data transfer accessory

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-910

PCE-910 is a portable handheld digital differential pressure vacuum gauge, meter or manometer used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-910 features a dust-proof, splash-resistant housing, allowing the meter to be used under adverse conditions.

- Pressure measuring range: ± 200 kPa / ± 29 psi / ± 2 bar
- Resolution: 100 Pa / 0.0145 psi / 0.001 bar
- 10 measurement units: psi, mbar, inH2O, mH2O, inHg, mmHg, Torr, Pa / kPa, atm, kg/cm²
- Optional PC software with RS-232 cable sold separately as a data transfer accessory

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PI 10
The digital multimeter PCE-PI 10 is used to determine the direction of rotation of 3-phase voltage networks. Furthermore, the digital multimeter is able to measure voltages up to 600V AC / DC. The rotating field direction is important for machines and plants.

- Measuring range: 75 ... 600V AC
- 3-phase rotating field detection
- AC / DC voltage measurement
- CAT III 600V
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PI 10
The electrical tester PCE-PI 10 is used to determine the direction of rotation of 3-phase voltage networks. Furthermore, the electrical tester is able to measure voltages up to 600V AC / DC. The rotating field direction is important for machines and plants.

- Measuring range: 75 ... 600V AC
- 3-phase rotating field detection
- AC / DC voltage measurement
- CAT III 600V
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-353N-ICA
The environmental meter is a sound meter with an adjustable measuring range of 30 ... 130 dB. The measured values ​​are displayed on the environmental meter on the one hand as a normal numerical value and on the other hand also graphically in the measuring range set by the user.

- Measuring range: 30 ... 130 dB, 35 ... 130 dBC
- Measurement functions: Lp, LAeq, LAe, LCpeak
- Accuracy: ± 1.5 dB (at 1 KHz and 94 dB)
- Frequency weighting: A and C
- Class 2
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-353N-ICA
The environmental tester is a sound meter with an adjustable measuring range of 30 ... 130 dB. The measured values ​​are displayed on the environmental tester on the one hand as a normal numerical value and on the other hand also graphically in the measuring range set by the user.

- Measuring range: 30 ... 130 dB, 35 ... 130 dBC
- Measurement functions: Lp, LAeq, LAe, LCpeak
- Accuracy: ± 1.5 dB (at 1 KHz and 94 dB)
- Frequency weighting: A and C
- Class 2
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DMS 200

PCE-DMS 200 is a GSM paper basis weight balance or scale used to accurately determine the basis weight (in relation to a square meter of material) of paper, cardboard, fabric, textiles and more directly in g, g/m², oz or oz/yd².


- Weighing ranges: 0 ... 200 g, 0 ... 20,000 g/m², 0 ... 7.05 oz or 0 ... 589.87
  oz/yd²
- Weighing units can be changed with just the push of a button
- 10 cm round pan for weighing up to 13 cm circle cut samples

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DMS 310
This GSM Paper Basis Weight Balance was specially designed for the measurement of basis weight. Thanks to this GSM Paper Basis Weight Balance, basis weight measurements can be carried out and evaluated within a very short time. 

- Measuring range: 0 ... 310 g / 0 ... 31,000 g / m²
- Resolution: 0.01 g / 1 g / m²
- RS-232 interface
- Piece counting function, weight per unit area
- Battery operation for mobile use
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DMS 200

PCE-DMS 200 is a GSM paper basis weight scale used to accurately determine the basis weight (in relation to a square meter of material) of paper, cardboard, fabric, textiles and more directly in g, g/m², oz or oz/yd².


- Weighing ranges: 0 ... 200 g, 0 ... 20,000 g/m², 0 ... 7.05 oz or 0 ... 589.87
  oz/yd²
- Weighing units can be changed with just the push of a button
- 10 cm round pan for weighing up to 13 cm circle cut samples

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-910

PCE-910 is a portable handheld digital HVAC meter or differential pressure manometer used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-910 features a dust-proof, splash-resistant housing, allowing the meter to be used under adverse conditions.

- Pressure measuring range: ± 200 kPa / ± 29 psi / ± 2 bar
- Resolution: 100 Pa / 0.0145 psi / 0.001 bar
- 10 measurement units: psi, mbar, inH2O, mH2O, inHg, mmHg, Torr, Pa / kPa, atm, kg/cm²
- Optional PC software with RS-232 cable sold separately as a data transfer accessory

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-890U

With the PCE-890U infrared thermometer, measurements of surface temperatures can be carried out quickly and easily. Since the infrared thermometer uses infrared radiation for temperature measurement, no direct contact with the measuring object is required. The PCE-890U infrared thermometer makes it easy to measure objects from a distance that are difficult to access.

- Measuring range: -50 ... 1150 °C / -58 ... 2102 °F
- Accuracy: ± 1.5% ± 2 °C / 3.6 °F (0 ... 500 °C / 32 ... 932 °F)
- Resolution: 0.1°C / 0.18°F (<1000 °C / 1832 °F)
- Emission level: 0.1 ... 1

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DMS 200

PCE-DMS 200 is a LAB Scale for paper basis weight used to accurately determine the GSM basis weight (in relation to a square meter of material) of paper, cardboard, fabric, textiles and more directly in g, g/m², oz or oz/yd².


- Weighing ranges: 0 ... 200 g, 0 ... 20,000 g/m², 0 ... 7.05 oz or 0 ... 589.87
  oz/yd²
- Weighing units can be changed with just the push of a button
- 10 cm round pan for weighing 11 cm circle cut samples

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DMS 200

PCE-DMS 200 is a laboratory balance for paper basis weight used to accurately determine the GSM basis weight (in relation to a square meter of material) of paper, cardboard, fabric, textiles and more directly in g, g/m², oz or oz/yd².


- Weighing ranges: 0 ... 200 g, 0 ... 20,000 g/m², 0 ... 7.05 oz or 0 ... 589.87
  oz/yd²
- Weighing units can be changed with just the push of a button
- 10 cm round pan for weighing 11 cm circle cut samples

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DMS 310
These laboratory balance scales were specially designed for the measurement of basis weight. Thanks to this laboratory balance scale, basis weight measurements can be carried out and evaluated within a very short time. 

- Measuring range: 0 ... 310 g / 0 ... 31,000 g / m²
- Resolution: 0.01 g / 1 g / m²
- RS-232 interface
- Piece counting function, weight per unit area
- Battery operation for mobile use
Manufacturer: PCE Instruments
Test Instruments manufacturer