Order no.: PCE-OC 5
The Clamp Voltmeter is suitable for service technicians, stationary use in repair departments in specialist shops and in laboratories. The Clamp Voltmeter is designed for current measurements up to 400 A AC.
 
Graphic display of  the measurement signal
- Oscilloscope mode
- memory function
 
Measurement parameters:
- DC voltage
- AC voltage
- AC
- frequency
- resistance
- capacity
- temperature
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-EM 883
Our multifunctional climate meter PCE-EM 883 combines all important features for measuring the ambient conditions in one device. The climate meter is designed as fast as possible to determine as many parameters as possible. Due to the large number of external sensors that the climate meter brings with it, such fast and precise measurements are possible.

- Measurement of all relevant environmental parameters
- Wind speed
- Temperature
- Humidity
- Sound level
- Light
- High accuracy
- MIN, MAX, HOLD function
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SM 11

With the conductivity meter PCE-SM 11 conductivity in non-saturated solutions can be quickly and accurately determined. The Conductivity Meter PCE-SM 11 has a high measuring accuracy thanks to the automatic temperature compensation.


- Measurement range:  0.0 ... 12.0 % (weight percentage)
- Accuracy: ± 0.5 %
- Resolution: 0.01 %
- Temperature compensation: automatic from 0 to +50 °C / 32 ... 122 °F

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CM 40
The flexible current clamp PCE-CM 40 is suitable for current measurements up to 3000 A AC. In addition to TRMS current measurement, the flexible current clamp PCE-CM 40 can be used to measure inrush currents. The measurement of the current takes place via a flexible Rogowski coil. 

- Measuring range up to 3000 A AC
- LC display
- Inrush function
- Frequency measurement
- Data memory
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DC 50
The current clamp PCE-DC 50 is a measuring device for measuring currents of up to 1000 A AC / DC. In addition to current measurement, the current clamp can also measure and test voltage, frequency, duty cycle, resistance, continuity test, capacitors and diodes. 

- Current measurement up to 1000 A
- Cover of the measuring sockets
- Voltage measurement up to 600V
- Temperature measurement via 2 thermocouples
- Bluetooth interface
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-322A

The PCE-322A is a handheld, portable, professional class 2 sound level meter or decibel (dB) meter with built-in data logging or data recording functionality. Thus, the PCE-322A is an ideal real-time noise measuring device as well as being useful for long-term noise exposure monitoring over time. The logged data can easily be downloaded to a PC or Portable for analysis.


- Class 2
- Sound measuring range: 30 ...130 dB
- Resolution: 0.1 dB
- Accuracy: ±1.4 dB
- Time weighting: A, C
- Frequency weighting: Slow, fast
- Memory: Stores up to 32,700 readings
- Sampling rate: 2 times per second
- ISO calibration available as an option

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-322A

PCE-322A is a handheld, portable, professional Class II sound level meter or decibel (dB) meter with built-in data-logging or data-recording functionality. Thus, PCE-322A is ideal for real-time noise measurement as well as for long-term noise exposure monitoring over time.


- Sound measuring range: 30 ...130 dB
- Resolution: 0.1 dB
- Accuracy: ±1.4 dB
- Memory: Stores up to 32,700 readings
- Sampling rate: 2 times per second
- ISO calibration available as an option 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CM 40
The flexible digital multimeter PCE-CM 40 is suitable for current measurements up to 3000 A AC. In addition to TRMS current measurement, the flexible digital multimeter PCE-CM 40 can be used to measure inrush currents. The measurement of the current takes place via a flexible Rogowski coil. 

- Measuring range up to 3000 A AC
- LC display
- Inrush function
- Frequency measurement
- Data memory
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DC 50
The digital multimeter PCE-DC 50 is a measuring device for measuring currents of up to 1000 A AC / DC. In addition to current measurement, the digital multimeter can also measure and test voltage, frequency, duty cycle, resistance, continuity test, capacitors and diodes. 

- Current measurement up to 1000 A
- Cover of the measuring sockets
- Voltage measurement up to 600V
- Temperature measurement via 2 thermocouples
- Bluetooth interface
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-EM 883
Our multifunctional digital thermometer PCE-EM 883 combines all important features for measuring the ambient conditions in one device. The digital thermometer is designed as fast as possible to determine as many parameters as possible. Due to the large number of external sensors that the digital thermometer brings with it, such fast and precise measurements are possible.

- Measurement of all relevant environmental parameters
- Wind speed
- Temperature
- Humidity
- Sound level
- Light
- High accuracy
- MIN, MAX, HOLD function
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-T 330
The digital thermometer has two measuring inputs. Each measuring input from the digital thermometer can be connected to a thermocouple of type K, T and J. With a measuring rate of 2 Hz, the digital thermometer shows rapid temperature fluctuations.

- Measuring range dependent on sensor: -200 ... 1370 °C / -328 ... 2498 °F
- Resolution: 0.01 °C
- Two-channel temperature data logger
- For thermocouples type K, T and J
- Data storage for 20,000 measuring points
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DC 50
The electrical tester PCE-DC 50 is a measuring device for measuring currents of up to 1000 A AC / DC. In addition to current measurement, the electrical tester can also measure and test voltage, frequency, duty cycle, resistance, continuity test, capacitors and diodes. 

- Current measurement up to 1000 A
- Cover of the measuring sockets
- Voltage measurement up to 600V
- Temperature measurement via 2 thermocouples
- Bluetooth interface
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-IT55

Electrical Tester for insulation resistance up to 2000 MΩ


- Measuring ranges AC voltage: 0 ... 750V
- Resolution AC voltage: 1V
- Accuracy AC voltage: ± 1.2% ± 10 dgts
- Complies with IEC1010-1, CAT III 1000V
- Large display with backlight
- Individual measurement and duration measurement

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-WS A
The Environmental Meter impresses with its compact design and various output signals. The Environmental Meter can be used for applications in warning technology, building automation and home technology.

- Measuring range:  0.8 m / s ... 50 m / s
- Measurement from: ≤0.8 m / s
- Output:  4 ... 20 mA (passive)
- IP 65 protection 
- mA, V, pulse or Modbus output
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-322A

PCE-322A is a handheld, portable, professional Class II sound level meter or decibel (dB) meter with built-in data-logging or data-recording functionality for environmental testing. Thus, PCE-322A is ideal for real-time noise measurement as well as for long-term noise exposure monitoring over time.


- Sound measuring range: 30 ...130 dB
- Resolution: 0.1 dB
- Accuracy: ±1.4 dB
- Memory: Stores up to 32,700 readings
- Sampling rate: 2 times per second
- ISO calibration available as an option

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-WS A
The Environmental Tester impresses with its compact design and various output signals. The Environmental Tester can be used for applications in warning technology, building automation and home technology.

- Measuring range:  0.8 m / s ... 50 m / s
- Measurement from: ≤0.8 m / s
- Output:  4 ... 20 mA (passive)
- IP 65 protection 
- mA, V, pulse or Modbus output
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-P18-0A0E0

The PCE-P18 humidity sensor is used in HVAC technology to monitor humidity and temperature. The measured values ​​are output by the humidity sensor PCE-P18 via the RS485 interface. In this compact humidity sensor, air humidity and temperature are precisely determined using a semiconductor component.

 

- Measuring range humidity: 0 ... 100% RH
- Measuring range temperature: - 20 ... 60 ° C
- Interface: RS 485 Modbus

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CM 40
The flexible HVAC meter PCE-CM 40 is suitable for current measurements up to 3000 A AC. In addition to TRMS current measurement, the flexible HVAC meter PCE-CM 40 can be used to measure inrush currents. The measurement of the current takes place via a flexible Rogowski coil. 

- Measuring range up to 3000 A AC
- LC display
- Inrush function
- Frequency measurement
- Data memory
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DC 50
The HVAC meter PCE-DC 50 is a measuring device for measuring currents of up to 1000 A AC / DC. In addition to current measurement, the HVAC meter can also measure and test voltage, frequency, duty cycle, resistance, continuity test, capacitors and diodes. 

- Current measurement up to 1000 A
- Cover of the measuring sockets
- Voltage measurement up to 600V
- Temperature measurement via 2 thermocouples
- Bluetooth interface
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-T 330
The HVAC meter has two measuring inputs. Each measuring input from the HVAC meter can be connected to a thermocouple of type K, T and J. With a measuring rate of 2 Hz, the HVAC meter shows rapid temperature fluctuations.

- Measuring range dependent on sensor: -200 ... 1370 °C / -328 ... 2498 °F
- Resolution: 0.01 °C
- Two-channel temperature data logger
- For thermocouples type K, T and J
- Data storage for 20,000 measuring points
Manufacturer: PCE Instruments
Test Instruments manufacturer