Order no.: PCE-PH20S-ICA

The water analysis meter is a straightforward device for determining the pH value of soil. The instrument has an external pH electrode with cable and it is waterproof (IP 67). The water analysis pH meter can be recalibrated by using the calibration solutions that are supplied with the device.


- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- waterproof (IP 67)
- Data-Hold function
- Calibration: automatic, pH 4, 7, or 10
- pH electrode for piercing into Soil
- Incl. ISO calibration certificate


**Care must be taken when inserting probe to not break it**
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-FWS 20N-1

This weather data logger with outside sensor is a real all-rounder. The wireless weather data logger with outside sensor is easy to assemble based on the instructions provided. You do not have to be a professional to operate the wireless weather data logger and outside sensors. The weather data of the weather data logger with outside sensor for different parameters are sent up to 100 meters by radio signal to the main station.


- 2 displays
- Indoor temperature in Celsius or Fahrenheit
- Outside temperature in Celsius or Fahrenheit
- Indoor air humidity / outdoor air humidity
- Air pressure gauge in inHg or hPa
- Absolute or relative air pressure display selectable
- Precipitation indication in mm or inch
- Precipitation indicator for 1 hour, 24 hours, 1 week, 1 month
- Wind speed in mph, km / h, m / s, knots ...
- Wind direction indicator
- Wind chill temperature gauge
- Weather forecast, trend indicator, storm warning
- and much more...

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-FWS 20N-1

This weather station with outside sensor is a real all-rounder. The wireless weather station with outside sensor is easy to assemble based on the instructions provided. You do not have to be a professional to operate the wireless weather station and outside sensors. The weather data of the weather station with outside sensor for different parameters are sent up to 100 meters by radio signal to the main station.


- 2 displays
- Indoor temperature in Celsius or Fahrenheit
- Outside temperature in Celsius or Fahrenheit
- Indoor air humidity / outdoor air humidity
- Air pressure gauge in inHg or hPa
- Absolute or relative air pressure display selectable
- Precipitation indication in mm or inch
- Precipitation indicator for 1 hour, 24 hours, 1 week, 1 month
- Wind speed in mph, km / h, m / s, knots ...
- Wind direction indicator
- Wind chill temperature gauge
- Weather forecast, trend indicator, storm warning
- and much more...

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-FWS 20N-1

This wind measurer station with outside sensor is a real all-rounder. The wireless wind measurer station with outside sensor is easy to assemble based on the instructions provided. You do not have to be a professional to operate the wireless wind measurer station and outside sensors. The weather data of the wind measurer station with outside sensor for different parameters are sent up to 100 meters by radio signal to the main station.


- 2 displays
- Indoor temperature in Celsius or Fahrenheit
- Outside temperature in Celsius or Fahrenheit
- Indoor air humidity / outdoor air humidity
- Air pressure gauge in inHg or hPa
- Absolute or relative air pressure display selectable
- Precipitation indication in mm or inch
- Precipitation indicator for 1 hour, 24 hours, 1 week, 1 month
- Wind speed in mph, km / h, m / s, knots ...
- Wind direction indicator
- Wind chill temperature gauge
- Weather forecast, trend indicator, storm warning
- and much more...

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-FWS 20N-1

This wind speed meter station with outside sensor is a real all-rounder. The wireless wind speed meter station with outside sensor is easy to assemble based on the instructions provided. You do not have to be a professional to operate the wireless wind speed meter station and outside sensors. The weather data of the wind speed meter station with outside sensor for different parameters are sent up to 100 meters by radio signal to the main station.


- 2 displays
- Indoor temperature in Celsius or Fahrenheit
- Outside temperature in Celsius or Fahrenheit
- Indoor air humidity / outdoor air humidity
- Air pressure gauge in inHg or hPa
- Absolute or relative air pressure display selectable
- Precipitation indication in mm or inch
- Precipitation indicator for 1 hour, 24 hours, 1 week, 1 month
- Wind speed in mph, km / h, m / s, knots ...
- Wind direction indicator
- Wind chill temperature gauge
- Weather forecast, trend indicator, storm warning
- and much more...

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-LD 1

PCE-LD 1 is a portable handheld gas detector used to locate CFC/HFC refrigerant gas leaks. This highly sensitive gas leak detector can locate gas leaks from HVACR refrigeration systems even in areas contaminated by other gases. The gas sensor is located at the end of a 390 mm / 15.35 in flexible goose-neck tube, allowing unique access to hard-to-reach places.


- Adjustable high/low sensitivity:
    6 g/yr or 30 g/yr for R-22 and R-134a
    8 g/yr or 40 g/yr for R404A, R-407C and R-410A

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-LD 1

PCE-LD 1 is a portable handheld gas detector used to locate CFC/HFC refrigerant gas leaks. This highly sensitive gas leak detector can locate gas leaks from HVACR refrigeration systems even in areas contaminated by other gases. The gas sensor is located at the end of a 390 mm / 15.35 in flexible goose-neck tube, allowing unique access to hard-to-reach places.


- Adjustable high/low sensitivity:
    6 g/yr or 30 g/yr for R-22 and R-134a
    8 g/yr or 40 g/yr for R404A, R-407C and R-410A

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-LD 1

PCE-LD 1 is a portable handheld leak detector used to locate CFC/HFC leaks. This highly sensitive leak detector can locate gas leaks from HVACR refrigeration systems even in areas contaminated by other gases. The gas sensor is located at the end of a 390 mm / 15.35 in flexible goose-neck tube, allowing unique access to hard-to-reach places.


- Adjustable high / low sensitivity:
    6 g/yr or 30 g/yr for R-22 and R-134a
    8 g/yr or 40 g/yr for R404A, R-407C and R-410A

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-LD 1

PCE-LD 1 is a portable handheld refrigerant gas leak detector used to locate CFC/HFC refrigerant gas leaks. This highly sensitive gas leak detector can locate gas leaks from HVACR refrigeration systems even in areas contaminated by other gases. The gas sensor is located at the end of a 390 mm / 15.35 in flexible goose-neck tube, allowing unique access to hard-to-reach places.


- Adjustable high / low sensitivity:
    6 g/yr or 30 g/yr for R-22 and R-134a
    8 g/yr or 40 g/yr for R404A, R-407C and R-410A

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: 80490 Macro-Linie

The Dynamometer is suitable for weighing all goods of up to 500 N. The resolution of the Dynamometer is 5 N, and the maximum deviation is ±0.3 % at full load - unique for this kind of Dynamometer. Due to its type of construction, the Dynamometer does not need any batteries and is also suitable for demonstration purposes in schools or universities.


- Measuring range: 0 ... 500 N
- Resolution: 5 N
- Low on maintenance
- Good value for money
- Additional accessories

Manufacturer: Pesola
Test Instruments manufacturer
Order no.: 80490 Macro-Linie

The 500N Force Gauge is suitable for weighing all goods of up to 50 kg or 110 lbs. The Force Gauge has a high resolution and a maximum deviation of ±0.3 % at full load - unique for this kind of force meter. Due to its type of construction, the Force Gauge doesn't need any batteries and is also suitable for demonstration purposes in schools or universities.


- Measuring range: 0 ... 500 N
- Resolution: 5 N
- Low on maintenance
- Good value for money
- Additional accessories

Manufacturer: Pesola
Test Instruments manufacturer
Order no.: 80490 Macro-Linie

The 500N Hanging Scales are suitable for weighing all goods of up to 50 kg or 110 lbs. The hanging scales have a high resolution and a maximum deviation of ±0.3 % at full load - unique for this kind of force meter. Due to their type of construction, the hanging scales do not need any batteries and are also suitable for demonstration purposes in schools or universities.


- Measuring range: 0 ... 500 N
- Resolution: 5 N
- Low on maintenance
- Good value for money
- Additional accessories

Manufacturer: Pesola
Test Instruments manufacturer
Order no.: 80490 Macro-Linie

The 500N LAB Scale is suitable for weighing all goods of up to 50 kg or 110 lbs. The LAB Scale has a high resolution and a maximum deviation of ±0.3 % at full load - unique for this kind of force meter. Due to its type of construction, the LAB Scale does not need any batteries and is also suitable for demonstration purposes in schools or universities.


- Measuring range: 0 ... 500 N
- Resolution: 5 N
- Low on maintenance
- Good value for money
- Additional accessories

Manufacturer: Pesola
Test Instruments manufacturer
Order no.: 80490 Macro-Linie

The 500N Laboratory Balance is suitable for weighing all goods of up to 50 kg or 110 lbs. The Laboratory Balance has a high resolution and a maximum deviation of ±0.3 % at full load - unique for this kind of force meter. Due to its type of construction, the Laboratory Balance does not need any batteries and is also suitable for demonstration purposes in schools or universities.


- Measuring range: 0 ... 500 N
- Resolution: 5 N
- Low on maintenance
- Good value for money
- Additional accessories

Manufacturer: Pesola
Test Instruments manufacturer
Order no.: 80050 Macro-Linie

The 50kg Dynamometer is suitable for weighing all goods of up to 50 kg or 110 lbs. The Dynamometer has a high resolution and a maximum deviation of ±0.3 % at full load - unique for this kind of force meter. Due to its type of construction, the Dynamometer does not need any batteries and is also suitable for demonstration purposes in schools or universities.


- Measuring range: 0 ... 50 kg
- Resolution: 500 g
- Low on maintenance
- Resistance to corrosion
- Additional accessories

Manufacturer: Pesola
Test Instruments manufacturer
Order no.: 80050 Macro-Linie

The 50kg Force Gauge is suitable for weighing all goods of up to 50 kg or 110 lbs. The Force Gauge has a high resolution and a maximum deviation of ±0.3 % at full load - unique for this kind of force meter. Due to its type of construction, the Force Gauge does not need any batteries and is also suitable for demonstration purposes in schools or universities.


- Measuring range: 0 ... 50 kg
- Resolution: 500 g
- Low on maintenance
- Resistance to corrosion
- Additional accessories

Manufacturer: Pesola
Test Instruments manufacturer
Order no.: Gamma-Easy

The Geiger Counter Gamma-Easy clearly indicates the radioactive contamination in µSv/h und mSv/h immediately. The Geiger Counter helps you to form an opinion on the omnipresent environmental radiation of a delivered or purchased material (metal scrap, food…) within only seconds in order to decide about the condition of these goods. The test instrument in addition works as a dose meter.


- Measuring range: 0.1 ... 50 µS/h
- Resolution: 0.01 µS/h
- Acoustic signal of decay rate and Dosimeter/AVG-Function
- Robust and ergonomic casing
- MAX-Hold-Function for last 10 measurements

 

Manufacturer: Gamma-Scout
Test Instruments manufacturer
Order no.: 80050 Macro-Linie

The 50kg Hanging Scales are suitable for weighing all goods of up to 50 kg or 110 lbs. The hanging scales have a high resolution and a maximum deviation of ±0.3 % at full load - unique for this kind of force meter. Due to their type of construction, the hanging scales do not need any batteries and are also suitable for demonstration purposes in schools or universities.


- Measuring range: 0 ... 50 kg
- Resolution: 500 g
- Low on maintenance
- Resistance to corrosion
- Additional accessories

Manufacturer: Pesola
Test Instruments manufacturer
Order no.: 80050 Macro-Linie

The 50kg LAB Scale is suitable for weighing all goods of up to 50 kg or 110 lbs. The LAB Scale has a high resolution and a maximum deviation of ±0.3 % at full load - unique for this kind of force meter. Due to its type of construction, the LAB Scale does not need any batteries and is also suitable for demonstration purposes in schools or universities.


- Measuring range: 0 ... 50 kg
- Resolution: 500 g
- Low on maintenance
- Resistance to corrosion
- Additional accessories

Manufacturer: Pesola
Test Instruments manufacturer
Order no.: 80050 Macro-Linie

The 50kg Laboratory Balance is suitable for weighing all goods of up to 50 kg or 110 lbs. The Laboratory Balance has a high resolution and a maximum deviation of ±0.3 % at full load - unique for this kind of force meter. Due to its type of construction, the Laboratory Balance does not need any batteries and is also suitable for demonstration purposes in schools or universities.


- Measuring range: 0 ... 50 kg
- Resolution: 500 g
- Low on maintenance
- Resistance to corrosion
- Additional accessories

Manufacturer: Pesola
Test Instruments manufacturer