Order no.: PCE-PH 26F

The environmental meter PCE-PH 26F is used to measure the pH of viscous media. Thanks to the flat pH electrode, the environmental meter is particularly well suited for the measurement of the pH value of sludges or viscous media such as oils and creams. The measuring range of the environmental meter ranges from -1 ... 15 pH, and it has an internal calibration function with up to 3 interpolation points.


- Calibration points: 1, 2 or 3
- Measuring range: -1 ... 15 pH
- Temperature measuring range: 0.0 ... 60°C / 32 ... 140°F
- Flat pH electrode
- Automatic temperature compensation
- For viscous liquids
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CMM 10
The environmental tester PCE-CMM 10 is a multi-function meter for measuring the air quality. This environmental tester measures synchronously the CO2 concentration, the air temperature and the humidity. 

- Measuring range CO2: 400 ... 5000 ppm
- Measuring range temperature: -10.0 ... 50.0°C / 14 ... 122°F
- Measuring range humidity: 0 ... 99% rh
- Battery operation
- Limit exceeded
- Beep
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CMM 10
The gas detector PCE-CMM 10 is a multi-function meter for measuring the air quality. This gas detector measures synchronously the CO2 concentration, the air temperature and the humidity. 

- Measuring range CO2: 400 ... 5000 ppm
- Measuring range temperature: -10.0 ... 50.0°C / 14 ... 122°F
- Measuring range humidity: 0 ... 99% rh
- Battery operation
- Limit exceeded
- Beep
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CMM 10
The gas leak detector PCE-CMM 10 is a multi-function meter for measuring the air quality. This gas leak detector measures synchronously the CO2 concentration, the air temperature and the humidity. 

- Measuring range CO2: 400 ... 5000 ppm
- Measuring range temperature: -10.0 ... 50.0°C / 14 ... 122°F
- Measuring range humidity: 0 ... 99% rh
- Battery operation
- Limit exceeded
- Beep
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: CC-H-5

Single-Use Gas Leak Detector Crowcon Clip and Clip+ with 24- or 36-month lifetime / triple alarm-signaling / no service or calibration necessary / self-testing function / CO, H2S or O2.


- Single-use Gas Leak Detector for H2S
- 24 months continuous operation time / detection time
- Optic, acoustic, and haptic alarm
- Adjustable alarm levels
- 0 ... 100 ppm

 

Manufacturer: Crowcon Detection Instruments Ltd.
Test Instruments manufacturer
Order no.: PCE-LCT 3
The HVAC meter is the ideal measuring device to measure leakage currents. This is made possible by the extensive measuring range of the HVAC meter.

Measuring function
- AC current measurement
- DC voltage
- AC voltage
- Resistance
- Continuity test
- Temperature
- Capacity
- Diode test
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-UV34

Radiation Meter PCE-UV34 measures radiation UV, with an external sensor.


- External sensor with UV correcting filter
- Auto after 10 minutes of inactivity to conserve battery power
- Large LCD
- Minimum, Maximum and Data Hold functions
- 0.000 to 1.999 mW/cm2 or 0.000 to 19.9 W/m²
- 1.999 to 19.99 mW/cm2  or 19.99 to 199.9 W/m²

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DPD-C
This digital panel indicator with stopwatch with start, stop and reset input functions. The digital panel indicator has a size of 96 x 48 mm and displays the values ​​on a 6-digit red LED display of 14 mm. It has different reading formats available in both decimal and sexagesimal format, with a configurable preset value and different counting functions.

- Digital panel indicator with stopwatch function
- LED display 6 digits red 14 mm color
- Decimal or sexagesimal reading format
- Functions: Start / Stop / Reset inputs, On power-up, Trigger sense, ...
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PH 26F

The pH meter PCE-PH 26F is used to measure the pH of viscous media. Thanks to the flat pH electrode, the pH meter is particularly well suited for the measurement of the pH value of sludges or viscous media such as oils and creams. The measuring range of the pH meter ranges from -1 ... 15 pH, and it has an internal calibration function with up to 3 interpolation points.


- Calibration points: 1, 2 or 3
- Measuring range: -1 ... 15 pH
- Temperature measuring range: 0.0 ... 60°C / 32 ... 140°F
- Flat pH electrode
- Automatic temperature compensation
- For viscous liquids
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-186 CB
The cable search device PCE-186 CB consists of a transmitter and a receiver. The transmitter of the line locator has many functions. For example, the line locator can be used to find wires in walls or break cables.

- Voltage measurement AC / DC
- For detection of line interruptions
- Cable tracking in walls and cable duct
- Different beeps
- Resistance measurement
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-UV34

Radiation Meter PCE-UV34 measures radiation UV, with an external sensor.


- External sensor with UV correcting filter
- Auto after 10 minutes of inactivity to conserve battery power
- Large LCD
- Minimum, Maximum and Data Hold functions
- 0.000 to 1.999 mW/cm2 or 0.000 to 19.9 W/m²
- 1.999 to 19.99 mW/cm2  or 19.99 to 199.9 W/m²

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CMM 10
The temperature meter PCE-CMM 10 is a multi-function meter for measuring the air quality. This temperature meter measures synchronously the CO2 concentration, the air temperature and the humidity. 

- Measuring range CO2: 400 ... 5000 ppm
- Measuring range temperature: -10.0 ... 50.0°C / 14 ... 122°F
- Measuring range humidity: 0 ... 99% rh
- Battery operation
- Limit exceeded
- Beep
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-UV34

Radiation Detector PCE-UV34 measures radiation UV, with an external sensor.


- External sensor with UV correcting filter
- Auto after 10 minutes of inactivity to conserve battery power
- Large LCD
- Minimum, Maximum and Data Hold functions
- 0.000 to 1.999 mW/cm2 or 0.000 to 19.9 W/m²
- 1.999 to 19.99 mW/cm2  or 19.99 to 199.9 W/m²

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-LCT 3
The voltmeter is the ideal measuring device to measure leakage currents. This is made possible by the extensive measuring range of the voltmeter.

Measuring function
- AC current measurement
- DC voltage
- AC voltage
- Resistance
- Continuity test
- Temperature
- Capacity
- Diode test
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PH 26F

The water analysis meter PCE-PH 26F is used to measure the pH of viscous media. Thanks to the flat pH electrode, the water analysis meter is particularly well suited for the measurement of the pH value of sludges or viscous media such as oils and creams. The measuring range of the water analysis meter ranges from -1 ... 15 pH, and it has an internal calibration function with up to 3 interpolation points.


- Calibration points: 1, 2 or 3
- Measuring range: -1 ... 15 pH
- Temperature measuring range: 0.0 ... 60°C / 32 ... 140°F
- Flat pH electrode
- Automatic temperature compensation
- For viscous liquids
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-186 CB
The wire tracer PCE-186 CB consists of a transmitter and a receiver. The transmitter of the wire tracer has many functions. For example, the wire tracer can be used to find wires in walls or break cables.

- Voltage measurement AC / DC
- For detection of line interruptions
- Cable tracking in walls and cable duct
- Different beeps
- Resistance measurement
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: CA-MN15

Clamp on Tester for multimeters, oscilloscopes and current faults, max. 200 A AC, max. Diameter 20 mm. The Clamp on Tester MN series offers 3 choices for the output. In addition to AC and AC voltage, a DC voltage output is possible from the Clamp on Tester. The test instrument is sent out manufacturer calibrated - a certification according to ISO standards is available optionally.


- Rated current: 200 A AC
- Output signal: AC voltage
- Output/input ratio: 1 mV / A AC
- Output: lead and isolated Ø 4 mm male plugs

 

Manufacturer: Chauvin Arnoux GmbH
Test Instruments manufacturer
Order no.: CA-MN15

Current Clamp for multimeters, oscilloscopes and current faults, max. 200 A AC, max. diameter 20 mm.


- Rated current: 200 A AC
- Output signal: AC voltage
- Output/input ratio: 1 mV / A AC
- Output: lead and isolated Ø 4 mm male plugs

 

Manufacturer: Chauvin Arnoux GmbH
Test Instruments manufacturer
Order no.: PCE-HVAC 6
The car measuring device PCE-HVAC 6 was specially developed for the tradesman in the field of heating, ventilation and air conditioning technology. This PCE-HVAC 6 car measuring device is ideal for many inspection and maintenance jobs in this area.

- Current measurement up to 1000 A
- Cover of the measuring sockets
- Voltage measurement up to 600V
- Temperature measurement via 2 thermocouples
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HVAC 6
The clamp meter PCE-HVAC 6 was specially developed for the tradesman in the field of heating, ventilation and air conditioning technology. This PCE-HVAC 6 clamp meter is ideal for many inspection and maintenance jobs in this area.

- Current measurement up to 1000 A
- Cover of the measuring sockets
- Voltage measurement up to 600V
- Temperature measurement via 2 thermocouples
Manufacturer: PCE Instruments
Test Instruments manufacturer