PCE-SDL 1 is a class 2 (type 2) sound data logger with USB interface, sound pressure level (SPL) meter, noise meter or decibel (dB) meter used for long-term acoustic measurements.

- Measuring range: 30 ... 130 dB
- Accuracy: ± 1.4 dB
- Frequency: 31.5 Hz ... 8 kHz
- Frequency weighting: A and C
- Memory: Stores up to 129,920 data sets or 36 hours at 1-sec interval
- Includes USB interface and Windows-compatible software for data transfer to PC

- Current measurement up to 1000 A
- Cover of the measuring sockets
- Voltage measurement up to 600V
- Temperature measurement via 2 thermocouples
- Bluetooth interface

- Measurement of all relevant environmental parameters
- Wind speed
- Temperature
- Humidity
- Sound level
- Light
- High accuracy
- MIN, MAX, HOLD function

The digital thermometer is an independent measuring device for determining temperatures between -40 ... 125 °C. The digital thermometer is therefore particularly suitable for monitoring particularly hot environments.

- Measuring range: -40 ... 125 °C / -40 ... 257 °F
- Measurement accuracy: ± 0.2 °C (0 ... +65 °C / 32 ... 149 °F)
- Resolution: 0.1 °C
- USB data logger
- Data export directly as PDF

- Current measurement up to 1000 A
- Cover of the measuring sockets
- Voltage measurement up to 600V
- Temperature measurement via 2 thermocouples
- Bluetooth interface

The environmental meter has a measuring range of up to 0 ... 30 m/s. In addition to the velocity, the environmental meter can precisely measure the volume flow and temperature. The compact design of the sensors, in combination with the extendable telescopic probe, enable measurements to be taken even in places that are particularly difficult to access.

- Speed: 0.00 ... 30.00 m/s / 0.00 ... 98.42 ft/s
- Volume flow: 0.0 ... 339120.0 m3/h
- Temperature: 0 ... 50 °C / 32 ... 122 °F
- Telescopic probe length: 210 ... 426 mm / 8.2 ... 16.7"
- Telescopic probe diameter: 12 mm / 0.47"

PCE-HVAC 3 is a multifunction environmental meter, tester or diagnostic measuring device used for indoor climate and environmental monitoring. In addition to measuring relative humidity and ambient room / dry-bulb temperature, the meter calculates dew-point and wet-bulb temperatures in degrees Celsius (°C) and Fahrenheit (°F). Thus, heating, ventilation and air conditioning (HVAC) installations and HVAC system performance assessments are key applications of the PCE-HVAC 3 meter.

- Relative humidity measuring range: 0 ... 100% RH
- Ambient / dew-point temp. range: -30 ... 100°C / -22 ... 212°F
- Wet-bulb temp. range: 0 ... 80°C / 32 ... 176°F

 

The environmental tester has a measuring range of up to 0 ... 30 m/s. In addition to the velocity, the environmental tester can precisely measure the volume flow and temperature. The compact design of the sensors, in combination with the extendable telescopic probe, enable measurements to be taken even in places that are particularly difficult to access.

- Speed: 0.00 ... 30.00 m/s / 0.00 ... 98.42 ft/s
- Volume flow: 0.0 ... 339120.0 m3/h
- Temperature: 0 ... 50 °C / 32 ... 122 °F
- Telescopic probe length: 210 ... 426 mm / 8.2 ... 16.7"
- Telescopic probe diameter: 12 mm / 0.47"

PCE-HVAC 3 is a multifunction environmental tester or diagnostic measuring device used for indoor climate and environmental monitoring. In addition to measuring relative humidity and ambient room / dry-bulb temperature, the meter calculates dew-point and wet-bulb temperatures in degrees Celsius (°C) and Fahrenheit (°F). Thus, heating, ventilation and air conditioning (HVAC) installations and HVAC system performance assessments are key applications of the PCE-HVAC 3 meter.

- Relative humidity measuring range: 0 ... 100% RH
- Ambient / dew-point temp. range: -30 ... 100°C / -22 ... 212°F
- Wet-bulb temp. range: 0 ... 80°C / 32 ... 176°F

 

PCE-HVAC 3 is a multifunction humidity detector, tester or diagnostic measuring device used for indoor climate and environmental monitoring. In addition to measuring relative humidity and ambient room / dry-bulb temperature, the meter calculates dew-point and wet-bulb temperatures in degrees Celsius (°C) and Fahrenheit (°F). Thus, heating, ventilation and air conditioning (HVAC) installations and HVAC system performance assessments are key applications of the PCE-HVAC 3 meter.

- Relative humidity measuring range: 0 ... 100% RH
- Ambient / dew-point temp. range: -30 ... 100°C / -22 ... 212°F
- Wet-bulb temp. range: 0 ... 80°C / 32 ... 176°F

 

The PCE-P18 temperature sensor is used in HVAC technology to monitor humidity and temperature. The measured values ​​are output by the temperature sensor PCE-P18 as a standard signal 4 ... 20 mA. Air humidity and temperature are precisely determined in this compact temperature sensor using a semiconductor component.

 

- Measuring range humidity: 0 ... 100% RH
- Measuring range temperature: - 20 ... 60 ° C
- Interface: RS 485 Modbus 
- Analog output: 0 ... 10 V

 

The PCE-P18 humidity sensor is used in HVAC technology to monitor humidity and temperature. The measured values ​​are output by the humidity sensor PCE-P18 as a standard signal 4 ... 20 mA. In this compact humidity sensor, air humidity and temperature are precisely determined using a semiconductor component.

- Measuring range humidity: 0 ... 100% RH
- Measuring range temperature: - 20 ... 60 ° C
- RS 485 Modbus interface, 4 ... 20 mA output

The HVAC meter has a measuring range of up to 0 ... 30 m/s. In addition to the velocity, the HVAC meter can precisely measure the volume flow and temperature. The compact design of the sensors, in combination with the extendable telescopic probe, enable measurements to be taken even in places that are particularly difficult to access.

- Speed: 0.00 ... 30.00 m/s / 0.00 ... 98.42 ft/s
- Volume flow: 0.0 ... 339120.0 m3/h
- Temperature: 0 ... 50 °C / 32 ... 122 °F
- Telescopic probe length: 210 ... 426 mm / 8.2 ... 16.7"
- Telescopic probe diameter: 12 mm / 0.47"

- Current measurement up to 1000 A
- Cover of the measuring sockets
- Voltage measurement up to 600V
- Temperature measurement via 2 thermocouples
- Bluetooth interface

The HVAC meter is an independent measuring device for determining temperatures between -40 ... 125 °C. The HVAC meter is therefore particularly suitable for monitoring particularly hot environments.

- Measuring range: -40 ... 125 °C / -40 ... 257 °F
- Measurement accuracy: ± 0.2 °C (0 ... +65 °C / 32 ... 149 °F)
- Resolution: 0.1 °C
- USB data logger
- Data export directly as PDF

PCE-LD 1 is a portable handheld gas detector used to locate CFC/HFC refrigerant gas leaks. This highly sensitive gas leak detector can locate gas leaks from HVACR refrigeration systems even in areas contaminated by other gases. The gas sensor is located at the end of a 390 mm / 15.35 in flexible goose-neck tube, allowing unique access to hard-to-reach places.

- Adjustable high/low sensitivity:
    6 g/yr or 30 g/yr for R-22 and R-134a
    8 g/yr or 40 g/yr for R404A, R-407C and R-410A

 

- Measurement of all relevant environmental parameters
- Wind speed
- Temperature
- Humidity
- Sound level
- Light
- High accuracy
- MIN, MAX, HOLD function