Industrial Measurement Products and Solutions
Order no.: TXgard-Plus-CO

The TXgard-Plus-CO is a single-gas Gassensor used to warn for gases (Carbon Monoxide, CO, 0 ... 500 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).


- Stationary
- For (Carbon Monoxide, CO, 0 ... 500 ppm)
- Additional display and alarm station
- ATEX or UL approval

 

Manufacturer: Crowcon Detection Instruments Ltd.
£ 1,459.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: TXgard-Plus-H2S

The TXgard-Plus-H2S is a single-gas Gas Leak Detector used to warn for gases (Hydrogen Sulfide, H2S, 0 ... 50 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).


- Stationary
- For (Hydrogen Sulfide, H2S, 0 ... 50 ppm)
- Additional display and alarm station
- ATEX or UL approval

 

Manufacturer: Crowcon Detection Instruments Ltd.
£ 1,459.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-FB 2TS

The torque meter serves for detection of the loosening torque as well as for tightening of screws. Simultaneously the torque meter can be used as a monitoring instrument. The torque test instrument provides a keyed chuck with two steady handles.


- Measuring range: 2 Nm (0,2 kgf-m) / 1.475 ft-lb
- Max. 0,5 % accuracy from the measuring range
- Measuring rate freely adjustable up to 1000 Hz
- 24 Bit Processor
- Keyed chuck up to Ø 13 mm

 

Manufacturer: PCE Instruments
£ 1,468.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-FB 5TS

The torque meter serves for detection of the loosening torque as well as for tightening of screws. Simultaneously the torque meter can be used as a monitoring instrument. The torque test instrument provides a keyed chuck with two steady handles.


- Measuring range: 5 Nm (0,5 kgf-m) / 3.69 ft-lb
- Max. 0,5 % accuracy from the measuring range
- Measuring rate freely adjustable up to 1000 Hz
- 24 Bit Processor
- Keyed chuck up to Ø 13 mm

 

Manufacturer: PCE Instruments
£ 1,468.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: TXgard-Plus-H2S

The TXgard-Plus-H2S is a single-gas Gas detector used to warn for gases (Hydrogen Sulfide, H2S, 0 ... 50 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).


- Stationary
- For (Hydrogen Sulfide, H2S, 0 ... 50 ppm)
- Additional display and alarm station
- ATEX or UL approval

 

Manufacturer: Crowcon Detection Instruments Ltd.
£ 1,459.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: AQ-500 Set OZU

Gas Detector AQ-500 is a highly accurate instrument for measuring ozone concentrations in the air. The Gas Detector can be equipped with four different heads that vary in their measurement range.


- High accuracy and functionality
- Interchangeable sensor heads!
- Battery operation
- Sensor head OZU included in delivery (Ozone 0-0.15 ppm)
- Alarm function
- Data logger

 

Manufacturer: Aeroqual
£ 1,451.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: AQ-500 Set OZU

Ozone Meter AQ-500 is a highly accurate instrument for measuring ozone concentrations in the air. The Ozone Meter can be equipped with four different heads that vary in their measurement range.


- High accuracy and functionality
- Interchangeable sensor heads!
- Battery operation
- Sensor head OZU included in delivery (Ozone 0-0.15 ppm)
- Alarm function
- Data logger

 

Manufacturer: Aeroqual
£ 1,451.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-5000-STAND

The PCE-5000-STAND test stand for the PCE-5000 hardness tester is used to support the automatic test probes. The test stand allows automated measurements, with a higher reproducibility of tubes and round material.

 

- Measuring stand for PCE-5000 hardness tester
- Support of automatic test probes

 

Automatic test probes and meter not included.

Manufacturer: PCE Instruments
£ 1,446.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-KD7

The multi channel data logger PCE-KD7 can be used as a data logger in measurement and control systems. The application area of ​​this multi channel data logger includes the measurement, visualization, monitoring and storage of process variables in various industrial branches, eg in the pharmaceutical, food or chemical industry. In addition to the analogue standard signals in the form of currents and voltages, this digital multi channel data logger can also process different types of thermocouples and resistance temperature sensors on up to 12 channels. It is also possible to retrieve up to 16 measured values ​​via the digital interfaces Ethernet or RS-485 and also to store them.

 

Note: This item must be configured before ordering!

Manufacturer: PCE Instruments
£ 1,444.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-KD7

The paperless recorder PCE-KD7 can be used as a data logger in measurement and control systems. The application area of ​​this paperless recorder includes the measurement, visualization, monitoring and storage of process variables in various industrial branches, eg in the pharmaceutical, food or chemical industry. In addition to the analogue standard signals in the form of currents and voltages, this digital paperless recorder can also process different types of thermocouples and resistance temperature sensors on up to 12 channels. It is also possible to retrieve up to 16 measured values ​​via the digital interfaces Ethernet or RS-485 and also to store them.

 

Note: This item must be configured before ordering!

Manufacturer: PCE Instruments
£ 1,444.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-KD7

The process controller PCE-KD7 can be used as a data logger in measurement and control systems. The application area of ​​this paperless recorder includes the measurement, visualization, monitoring and storage of process variables in various industrial branches, eg in the pharmaceutical, food or chemical industry. In addition to the analogue standard signals in the form of currents and voltages, this digital paperless recorder can also process different types of thermocouples and resistance temperature sensors on up to 12 channels. It is also possible to retrieve up to 16 measured values ​​via the digital interfaces Ethernet or RS-485 and also to store them.

 

Note: This item must be configured before ordering!

Manufacturer: PCE Instruments
£ 1,444.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-KD7

The temperature data logger PCE-KD7 can be used as a data logger in measurement and control systems. The application area of ​​this temperature data logger includes the measurement, visualization, monitoring and storage of process variables in various industrial branches, eg in the pharmaceutical, food or chemical industry. In addition to the analogue standard signals in the form of currents and voltages, this digital temperature data logger can also process different types of thermocouples and resistance temperature sensors on up to 12 channels. It is also possible to retrieve up to 16 measured values ​​via the digital interfaces Ethernet or RS-485 and also to store them.

 

Note: This item must be configured before ordering!

Manufacturer: PCE Instruments
£ 1,444.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-TDS 100H-ICA

PCE-TDS 100H-ICA is a portable handheld clamp-on ultrasonic HVAC meter used for non-invasive, unobstructed and highly accurate measurements of the flow velocity of liquids in metal, plastic and rubber pipes and tubes with a diameter of 57 … 720 mm / approx. 2 ... 28 in.  Software sold separately - see accessories for details.

 

- Measuring range: -32 ... 32 m/s, -105 ... 105 ft/s
- Resolution: 0.0001 m/s, 0.00033 ft/s
- Pipe size: DN 50 … 700, 57 … 720 mm (approx. 2 … 28")
- Sensor temperature range: 0 ... 160°C / 32 ... 320°F
- Sensor installation: V, Z
- Incl. sensors TDS-M1
- Incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
£ 1,432.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-TDS 100HS-ICA

PCE-TDS 100HS-ICA is a portable handheld clamp-on ultrasonic flow HVACR meter used for non-invasive, unobstructed and highly accurate measurements of the flow velocity of liquids in metal, plastic and rubber pipes and tubes with a diameter of 20 … 108 mm / approx. 3/4 in ... 4in. Software sold separately - see accessories for details.


- Measuring range: -32 ... 32 m/s, -105 ... 105 ft/s
- Resolution: 0.0001 m/s, 0.00033 ft/s
- Pipe size: DN 15 … 100, 20 … 108 mm (approx. 3/4 … 4")
- Sensor temperature range: 0 ... 160°C / 32 ... 320°F
- Sensor installation: V, (N,W)
- Incl. sensors TDS-S1
- Incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
£ 1,432.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-TDS 100H-ICA

PCE-TDS 100H-ICA is a portable handheld clamp-on ultrasonic flow meter used for non-invasive, unobstructed and highly accurate measurements of the flow velocity of liquids in metal, plastic and rubber pipes and tubes with a diameter of 57 … 720 mm / approx. 2 ... 28 in.  Software sold separately - see accessories for details.

 

- Measuring range: -32 ... 32 m/s, -105 ... 105 ft/s
- Resolution: 0.0001 m/s, 0.00033 ft/s
- Pipe size: DN 50 … 700, 57 … 720 mm (approx. 2 … 28")
- Sensor temperature range: 0 ... 160°C / 32 ... 320°F
- Sensor installation: V, Z
- Incl. sensors TDS-M1
- Incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
£ 1,432.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-TDS 100H-ICA

PCE-TDS 100H-ICA is a portable handheld clamp-on ultrasonic flow meter used for non-invasive, unobstructed and highly accurate measurements of the flow velocity of liquids in metal, plastic and rubber pipes and tubes with a diameter of 57 … 720 mm / approx. 2 ... 28 in.  Software sold separately - see accessories for details.

 

- Measuring range: -32 ... 32 m/s, -105 ... 105 ft/s
- Resolution: 0.0001 m/s, 0.00033 ft/s
- Pipe size: DN 50 … 700, 57 … 720 mm (approx. 2 … 28")
- Sensor temperature range: 0 ... 160°C / 32 ... 320°F
- Sensor installation: V, Z
- Incl. sensors TDS-M1
- Incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
£ 1,432.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-TDS 100HS-ICA

PCE-TDS 100HS-ICA is a portable handheld clamp-on ultrasonic flow meter used for non-invasive, unobstructed and highly accurate measurements of the flow velocity of liquids in metal, plastic and rubber pipes and tubes with a diameter of 20 … 108 mm / approx. 3/4 in ... 4in. Software sold separately - see accessories for details.


- Measuring range: -32 ... 32 m/s, -105 ... 105 ft/s
- Resolution: 0.0001 m/s, 0.00033 ft/s
- Pipe size: DN 15 … 100, 20 … 108 mm (approx. 3/4 … 4")
- Sensor temperature range: 0 ... 160°C / 32 ... 320°F
- Sensor installation: V, (N,W)
- Incl. sensors TDS-S1
- Incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
£ 1,432.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-TDS 100HS-ICA

PCE-TDS 100HS-ICA is a portable handheld clamp-on ultrasonic flow meter used for non-invasive, unobstructed and highly accurate measurements of the flow velocity of liquids in metal, plastic and rubber pipes and tubes with a diameter of 20 … 108 mm / approx. 3/4 in ... 4in. Software sold separately - see accessories for details.


- Measuring range: -32 ... 32 m/s, -105 ... 105 ft/s
- Resolution: 0.0001 m/s, 0.00033 ft/s
- Pipe size: DN 15 … 100, 20 … 108 mm (approx. 3/4 … 4")
- Sensor temperature range: 0 ... 160°C / 32 ... 320°F
- Sensor installation: V, (N,W)
- Incl. sensors TDS-S1
- Incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
£ 1,432.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-TDS 100H-ICA

PCE-TDS 100H-ICA is a portable handheld clamp-on ultrasonic flow tester used for non-invasive, unobstructed and highly accurate measurements of the flow velocity of liquids in metal, plastic and rubber pipes and tubes with a diameter of 57 … 720 mm / approx. 2 ... 28 in.  Software sold separately - see accessories for details.

 

- Measuring range: -32 ... 32 m/s, -105 ... 105 ft/s
- Resolution: 0.0001 m/s, 0.00033 ft/s
- Pipe size: DN 50 … 700, 57 … 720 mm (approx. 2 … 28")
- Sensor temperature range: 0 ... 160°C / 32 ... 320°F
- Sensor installation: V, Z
- Incl. sensors TDS-M1
- Incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
£ 1,432.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-TDS 100HS-ICA

PCE-TDS 100HS-ICA is a portable handheld clamp-on ultrasonic flow tester used for non-invasive, unobstructed and highly accurate measurements of the flow velocity of liquids in metal, plastic and rubber pipes and tubes with a diameter of 20 … 108 mm / approx. 3/4 in ... 4in. Software sold separately - see accessories for details.


- Measuring range: -32 ... 32 m/s, -105 ... 105 ft/s
- Resolution: 0.0001 m/s, 0.00033 ft/s
- Pipe size: DN 15 … 100, 20 … 108 mm (approx. 3/4 … 4")
- Sensor temperature range: 0 ... 160°C / 32 ... 320°F
- Sensor installation: V, (N,W)
- Incl. sensors TDS-S1
- Incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
£ 1,432.00

Price excl. VAT &. delivery
2 year Warranty