A Color Matching Cabinet is used wherever products must have the same color properties during production. A Color Matching Cabinet contributes to quality control. The Color Matching Cabinet is a simulation instrument which is capable of displaying certain situations in order to analyze color characteristics of individual samples by means of different light types.

- Color assessment under different light types
- With hour counter
- Short warm-up time
- According to ASTM D1729, ISO3664, DIN, ANSI, BSI

This color meter is especially designed for meat, food, vegetables or wet products testing. Only the aperture comes into contact with the surfaces to be measured. So it is guaranteed that no liquids can cause cross contamination while doing the measurement. The color meter simulates to see surfaces like with human eyes.

- Measuring aperture of 20 mm and 45°/0° illumination/viewing angle
- Rechargeable lithium-ion battery
- Auto white black calibration
- Designed specifically for the food industry
- Software included

 

A color lighting chamber is used wherever products must have the same color properties during production. A color lighting chamber contributes to quality control. The color lighting chamber is a simulation instrument which is capable of displaying certain situations in order to analyze color characteristics of individual samples by means of different light types.

- Color assessment under different light types
- With hour counter
- Short warm-up time
- According to ASTM D1729, ISO3664, DIN, ANSI, BSI

 

This Colorimeter is especially designed for meat, food, vegetables or wet products testing. Only the aperture comes into contact with the surfaces to be measured. So it is guaranteed that no liquids can cause cross contamination while doing the measurement. The colorimeter simulates to see surfaces like with human eyes. Used mainly in the medical and food industry the color test instrument in addition meets all requirements for plastics surface measurements (PP, PE, PET, ABS, EVA) and also powders. The color meter is delivered manufacturer calibrated, but can optionally be certified to ISO standards.

- Measuring aperture of 20 mm and 45°/0° illumination/viewing angle
- Rechargeable lithium-ion battery
- Auto white black calibration
- Designed specifically for the food industry
- Software included

 

This Colorimeter is especially designed for meat, food, vegetables or wet products testing. Only the aperture comes into contact with the surfaces to be measured. So it is guaranteed that no liquids can cause cross contamination while doing the measurement. 

- Measuring aperture of 20 mm and 45°/0° illumination/viewing angle
- Rechargeable lithium-ion battery
- Auto white black calibration
- Stable performance
- Measurement of different colors
- Application for many surfaces
- Simple user interface
- Software included

 

The Dynamometer PCE-DFG N 100K-ICA measures both tensile forces and compressive forces with a very high resolution and sampling rate. The dynamometer helps to determine the yield strengths, the tear-off force and is used wherever acting forces have to be documented.

- Measuring range: 0 ... 100 kN / 100,000 N
- Resolution: 10 N
- Accuracy: ± 1% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Including ISO calibration certificate

The force gauge PCE-DFG N 100K-ICA measures both tensile forces and compressive forces with a very high resolution and sampling rate. The force gauge helps to determine the yield strengths, the tear-off force and is used wherever acting forces have to be documented.

- Measuring range: 0 ... 100 kN / 100,000 N
- Resolution: 10 N
- Accuracy: ± 1% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Including ISO calibration certificate

The TXgard-IS+O3 is a single-gas Gas Leak Detector used to warn for gases (Ozone, O₃, 0 ... 1 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Ozone, O₃, 0 ... 1 ppm)
- Additional display and alarm station
- ATEX or UL approval

The TXgard-IS+PH3 is a single-gas Gas Leak Detector used to warn for gases (Phosphine, PH₃, 0 ... 2 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Phosphine, PH₃, 0 ... 2 ppm)
- Additional display and alarm station
- ATEX or UL approval

 

- Measurement range: 100 Nm / 73.76 ft-lb
- Resolution: 0.1 Nm / 0.0738 ft-lb
- Measurement uncertainty: ± 0.5% of the measurement range
- Memory for 100 measurement series with 8,000 measurement points each
- USB interface including PC software
- Graphic display
- incl. ISO Calibration Certificate for one direction (left or right)

The TXgard-IS+O3 is a single-gas Gas detector used to warn for gases (Ozone, O₃, 0 ... 1 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Ozone, O₃, 0 ... 1 ppm)
- Additional display and alarm station
- ATEX or UL approval

 

The TXgard-IS+PH3 is a single-gas Gas detector used to warn for gases (Phosphine, PH₃, 0 ... 2 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Phosphine, PH₃, 0 ... 2 ppm)
- Additional display and alarm station
- ATEX or UL approval

 

- Measurement range: 100 Nm / 73.76 ft-lb
- Resolution: 0.1 Nm / 0.0738 ft-lb
- Measurement uncertainty: ± 0.5% of the measurement range
- Memory for 100 measurement series with 8,000 measurement points each
- USB interface including PC software
- Graphic display
- incl. ISO Calibration Certificate for one direction (left or right)

The PCE-VM 21 consists of an optical microscope, CCD camera and LCD screen. Due to the 75-fold magnification, it is possible to view very small parts, electronics and even medical instruments very clearly. The PCE-VM 21 inspection camera reduces eye strain during soldering of printed circuit boards (PCBs), investigating of material defects on metal surfaces, and inspecting surgical implements for reprocessing, making the PCE-VM 21 industrial, healthcare or food / hygiene microscope a vital addition to your plant, shop, production line, quality assurance laboratory or instrument reprocessing clean room. The PCE-VM 21 quality assurance microscope offers:

- Continuous magnification from 10 ... 75 times
- Adjustable height for viewing of larger objects
- Transmitted light and incident light illumination

 

This vertical force test stand is a motorized test station with a force range of up to 500 N. In addition to setting the speed, the vertical force test stand also offers the option of switching between automatic and manual mode.

- Force range: 500 N / 50 kg / 110 lb
- Distance display resolution: 0.02 mm
- Resolution: 1 mm/min
- Tensile and compression testing
- Travel: 270 mm / 10.6"

The PCE-VM 21 consists of an optical microscope, CCD camera and LCD screen. Due to the 75-fold magnification, it is possible to view very small parts, electronics and even medical instruments very clearly. The PCE-VM 21 inspection microscope reduces eye strain during soldering of printed circuit boards (PCBs), investigating of material defects on metal surfaces, and inspecting surgical implements for reprocessing, making the PCE-VM 21 industrial, healthcare or food / hygiene microscope a vital addition to your plant, shop, production line, quality assurance laboratory or instrument reprocessing clean room. The PCE-VM 21 quality assurance microscope offers:

- Continuous magnification from 10 ... 75 times
- Adjustable height for viewing of larger objects
- Transmitted light and incident light illumination

 

The 4-way automotive tester / borescope with a cable length of one metre and a camera head diameter of 6 mm is the ideal tool for endoscopy. The LED illuminance on the camera head can be adjusted in 5 steps up to 25,000 lux.

- 4-way camera head 360°
- Camera diameter: 6 mm / 0.23"
- Cable length: 1 m / 39"
- Camera pixels: 1,000,000
- Depth of field: 7 ... 110 mm / 0.27 ... 4.33"
- Mini-HDMI interface for image output

The 4-way condition monitoring inspection camera with a cable length of one metre and a camera head diameter of 6 mm is the ideal tool for endoscopy. The LED illuminance on the camera head can be adjusted in 5 steps up to 25,000 lux.

- 4-way camera head 360°
- Camera diameter: 6 mm / 0.23"
- Cable length: 1 m / 39"
- Camera pixels: 1,000,000
- Depth of field: 7 ... 110 mm / 0.27 ... 4.33"
- Mini-HDMI interface for image output

- Measuring range: 10 Nm 7.4 ft-lb
- Resolution: 0.005 Nm / 0.0037 ft-lb
- Accuracy: 0.3% of the measuring range
- USB interface for software connection
- Integrated printer

The 4-way HVAC meter with a cable length of one metre and a camera head diameter of 6 mm is the ideal tool for endoscopy. The LED illuminance on the camera head can be adjusted in 5 steps up to 25,000 lux.

- 4-way camera head 360°
- Camera diameter: 6 mm / 0.23"
- Cable length: 1 m / 39"
- Camera pixels: 1,000,000
- Depth of field: 7 ... 110 mm / 0.27 ... 4.33"
- Mini-HDMI interface for image output