Industrial Measurement Products and Solutions
Order no.: Gas-Pro-2

This gas detector Gas-Pro-2 can gauge with its sensors a maximum of five different gases. Because of this versatility, the gas detector Gas-Pro-2 is ideal for use in a variety of applications, such as near canals, sewage treatment plants, drains, wastewater facilities, dumps and landfills, chemical and oil plants, shipping ports and more.


- Purpose: Personal protection
Sensor type: CO / H2S / O2 / CH4
Memory: Yes
Interface: USB
- Includes suction pump
Other gas sensors available upon request. (Please email jmu@pce-instruments.com (UK) or jwe@pce-instruments.com (US) for details!)


Manufacturer: Crowcon Detection Instruments Ltd.
Test Instruments manufacturer
Order no.: PCE-RT 1200-ICA
The Material Surface Roughness Tester PCE-RT 1200-ICA is used to determine surface roughness. The compact roughness tester is a handheld device for mobile use. Due to the power supply via a powerful battery, it can be used directly on site. The material surface roughness tester PCE-RT 1200-ICA is used in the laboratory, in production and everywhere where the roughness of surfaces is to be determined.

  

- Measures Ra, Rz, Rq and Rt in Metric (µm) and Imperial (µinch)
- Ra, Rq: 0.005 ... 16.00 μm / 0.197µinch... 629.921 µinch measurement range
- Rz, Rt: 0.002 ... 200.0 μm / 0.079µinch... 7874.016 µinch measurement range
Induction method with Diamond sensor
- Accuracy < ± 10% and Repeatability < 6%
- Saves up to 20 Data points
- Micro-USB interface
- Built-in rechargeable li-ion battery
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RT 1200-ICA
The Profilometer - Roughness Tester PCE-RT 1200-ICA is used to determine surface roughness. The compact roughness tester is a handheld device for mobile use. Due to the power supply via a powerful battery, it can be used directly on site. The profilometer PCE-RT 1200-ICA is used in the laboratory, in production and everywhere where the roughness of surfaces is to be determined.

  

- Measures Ra, Rz, Rq and Rt in Metric (µm) and Imperial (µinch)
- Ra, Rq: 0.005 ... 16.00 μm / 0.197µinch... 629.921 µinch measurement range
- Rz, Rt: 0.002 ... 200.0 μm / 0.079µinch... 7874.016 µinch measurement range
Induction method with Diamond sensor
- Accuracy < ± 10% and Repeatability < 6%
- Saves up to 20 Data points
- Micro-USB interface
- Built-in rechargeable li-ion battery
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RT 1200-ICA

 

The Roughness Tester PCE-RT 1200-ICA is used to determine surface roughness. The compact roughness tester is a handheld device for mobile use. Due to the power supply via a powerful battery, it can be used directly on site. The roughness tester PCE-RT 1200-ICA is used in the laboratory, in production and everywhere where the roughness of surfaces is to be determined.

  

- Measures Ra, Rz, Rq and Rt in Metric (µm) and Imperial (µinch)
- Ra, Rq: 0.005 ... 16.00 μm / 0.197µinch... 629.921 µinch measurement range
- Rz, Rt: 0.002 ... 200.0 μm / 0.079µinch... 7874.016 µinch measurement range
Induction method with Diamond sensor
- Accuracy < ± 10% and Repeatability < 6%
- Saves up to 20 Data points
- Micro-USB interface
- Built-in rechargeable li-ion battery
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RT 1200-ICA
The Surface Testing - Roughness Tester PCE-RT 1200-ICA is used to determine surface roughness. The compact roughness tester is a handheld device for mobile use. Due to the power supply via a powerful battery, it can be used directly on site. The surface testing - roughness tester PCE-RT 1200-ICA is used in the laboratory, in production and everywhere where the roughness of surfaces is to be determined.

  

- Measures Ra, Rz, Rq and Rt in Metric (µm) and Imperial (µinch)
- Ra, Rq: 0.005 ... 16.00 μm / 0.197µinch... 629.921 µinch measurement range
- Rz, Rt: 0.002 ... 200.0 μm / 0.079µinch... 7874.016 µinch measurement range
Induction method with Diamond sensor
- Accuracy < ± 10% and Repeatability < 6%
- Saves up to 20 Data points
- Micro-USB interface
- Built-in rechargeable li-ion battery
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VM 20
The accelerometer PCE-VM 20 is a compact device for direct evaluation of the vibration behavior of a machine. The accelerometer can measure and display various vibration parameters, such as vibration acceleration, vibration velocity or vibration displacement.

- Vibration acceleration: 0 ... 200 m / s², RMS and peak-peak
- Vibration speed: 0 ... 200 mm / s, RMS
- Vibration distance: 0 ... 2000 μm, peak-peak
- Real-time FFT analysis
- Direct evaluation according to DIN ISO 10816
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CSM 6

The color meter PCE-CSM 6 was developed for quality control and offers a high accuracy. When using the color meter, you can choose between different color spaces (CIE L*a*b, CIE L*a*b*C*h). After a measurement with the color meter, the reading can be used as a reference value while other readings can be recorded as a sample and later be compared to the reference value easily. Useful for determining color difference, chromaticity index, color sample database management, and color difference cumulative analysis.


CIE L*a*b*C*h, CIE L*a*b*
- Measuring aperture: Ø8 mm
- optional liquid sample kit listed under accessories
- Storage of 100 reference values and 20,000 samples
- Light source D65
- Illumination/Viewing Angles are 8°/d 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CSM 6

The colorimeter PCE-CSM 6 was developed for quality control and offers a high accuracy. When using the colorimeter, you can choose between different color spaces (CIE L*a*b, CIE L*a*b*C*h). After a measurement with the colorimeter, the reading can be used as a reference value while other readings can be recorded as a sample and later be compared to the reference value easily. Useful for determining color difference, chromaticity index, color sample database management, and color difference cumulative analysis.


CIE L*a*b*C*h, CIE L*a*b*
- Measuring aperture: Ø8 mm
- optional liquid sample kit listed under accessories
- Storage of 100 reference values and 20,000 samples
- Light sources D65
- Illumination/Viewing Angles 8°/d 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PIC 20
The condition monitoring inspection camera PCE-PIC 20 is an ideal tool for any service technician who needs to visually inspect pipes and ducts. The condition monitoring inspection camera PCE-PIC 20 has a 23 mm / 0.9 in camera head, which is attached to a glass fiber push cable. 

- Cable diameter / head diameter: 23 mm / 0.9 in
- 20 m / 66 ft push cable
- Electronic meter counting
- Battery and mains operation
- Waterproof up to 20 m / 66 ft
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: AQ-300 Set EOZ

Gas Detector AQ-300 is a highly accurate instrument for measuring ozone concentrations in the air. The Gas Detector can be equipped with four different heads that vary in their measurement range.


- High accuracy and functionality
- Interchangeable sensor heads!
- Battery operation
- Sensor head EOZ included in delivery (Ozone 0-10 ppm)
- Alarm function

Manufacturer: Aeroqual
Test Instruments manufacturer
Order no.: PCE-PIC 20
The HVAC meter PCE-PIC 20 is an ideal tool for any service technician who needs to visually inspect pipes and ducts. The HVAC meter PCE-PIC 20 has a 23 mm / 0.9 in camera head, which is attached to a glass fiber push cable. 

- Cable diameter / head diameter: 23 mm / 0.9 in
- 20 m / 66 ft push cable
- Electronic meter counting
- Battery and mains operation
- Waterproof up to 20 m / 66 ft
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PIC 20
The industrial borescope PCE-PIC 20 is an ideal tool for any service technician who needs to visually inspect pipes and ducts. The industrial borescope PCE-PIC 20 has a 23 mm / 0.9 in camera head, which is attached to a glass fiber push cable. 

- Cable diameter / head diameter: 23 mm / 0.9 in
- 20 m / 66 ft push cable
- Electronic meter counting
- Battery and mains operation
- Waterproof up to 20 m / 66 ft
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VE 1000

PCE-VE 1000 is an industrial borescope, engine borescope / camera borescope. The display features an exceptionally large 7" high-resolution LCD screen for impressive on-screen viewing capabilities.


- Stores photos and videos with sound to the included 8 GB
  SD memory card (max. compatibility 32 GB) for quick and
  easy transfer to a pc
- 360° image rotation (in 90° steps)
- Digital zoom

Display only. Camera cables (from diam. 5.5 mm / 0.22 in, 2-way, 4-way articulation) are sold separately. See accessories to customize.

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PIC 20
The inspection camera PCE-PIC 20 is an ideal tool for any service technician who needs to visually inspect pipes and ducts. The inspection camera PCE-PIC 20 has a 23 mm / 0.9 in camera head, which is attached to a glass fiber push cable. 

- Cable diameter / head diameter: 23 mm / 0.9 in
- 20 m / 66 ft push cable
- Electronic meter counting
- Battery and mains operation
- Waterproof up to 20 m / 66 ft
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VE 1000

PCE-VE 1000 is an industrial endoscope, borescope, videoscope or inspection camera display featuring an exceptionally large 7" high-resolution LCD screen for impressive on-screen viewing capabilities.


- Stores photos and saves videos with sound to the included 8 GB SD memory
  card (max. compatibility 32 GB) for quick and easy transfer to a computer
- 360° image rotation (in 90° steps)
- Digital zoom


Display only. Camera cables (from diam. 5.5 mm / 0.22 in, 2-way, 4-way articulation) are sold separately. See accessories to customize.

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PIC 20
The NDT tester inspection camera PCE-PIC 20 is an ideal tool for any service technician who needs to visually inspect pipes and ducts. The NDT tester inspection camera PCE-PIC 20 has a 23 mm / 0.9 in camera head, which is attached to a glass fiber push cable. 

- Cable diameter / head diameter: 23 mm / 0.9 in
- 20 m / 66 ft push cable
- Electronic meter counting
- Battery and mains operation
- Waterproof up to 20 m / 66 ft
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: AQ-300 Set EOZ

Ozone Meter AQ-300 is a highly accurate instrument for measuring ozone concentrations in the air. The Ozone Meter can be equipped with four different heads that vary in their measurement range.


- High accuracy and functionality
- Interchangeable sensor heads!
- Battery operation
- Sensor head EOZ included in delivery (Ozone 0-10 ppm)
-
Alarm function

Manufacturer: Aeroqual
Test Instruments manufacturer
Order no.: PCE-RT 2000
The profilometer PCE-RT 2000 is used for accurate measurement of surface roughness. The profilometer PCE-RT 2000 can be used on all surfaces. The roughness with the profilometer is precisely recorded via the piezotast head. The profilometer PCE-RT 2000 can be purchased here in our online shop.

- Measures Ra, Rq, Rsm, Rsk, Rz, Rt, Rp, Rv, Rc in both Metric (µm) and Imperial (µinch)
- Ra, Rq, Rc : 0.005 μm…16 μm / 0.197 µinch ... 629.921 µinch measurement range
- Rz, Rt Rp, Rv: 0.020 µm … 200 µm / 0.797 µinch ... 7874.016 µinch measurement range
- Rsm: 5 μm …1000 μm / 1968 µinch … 3937 µinch measurement range
- Rsk: -1 …. 1 measurement range
- Measurement accuracy: <± 10% and Repeatability < 6%
- Robust Piezoelectric sensor
- Saves up to 20 Data points
- 3 different cutoff wavelengths
- Micro USB Interface
- PC Software
- Built-in rechargeable li-ion battery
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RT 2000
The roughness tester PCE-RT 2000 is used for accurate measurement of surface roughness. The roughness tester PCE-RT 2000 can be used on all surfaces. The roughness with the roughness measuring device is precisely recorded via the piezotast head. The roughness tester PCE-RT 2000 can be purchased here in our online shop.

- Measures Ra, Rq, Rsm, Rsk, Rz, Rt, Rp, Rv, Rc in both Metric (µm) and Imperial (µinch)
- Ra, Rq, Rc : 0.005 μm…16 μm / 0.197 µinch ... 629.921 µinch measurement range
- Rz, Rt Rp, Rv: 0.020 µm … 200 µm / 0.797 µinch ... 7874.016 µinch measurement range
- Rsm: 5 μm …1000 μm / 1968 µinch … 3937 µinch measurement range
- Rsk: -1 …. 1 measurement range
- Measurement accuracy: <± 10% and Repeatability < 6%
- Robust Piezoelectric sensor
- Saves up to 20 Data points
- 3 different cutoff wavelengths
- Micro USB Interface
- PC Software
- Built-in rechargeable li-ion battery
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VE 1000

PCE-VE 1000 is an industrial snake camera, borescope, videoscope or inspection camera display featuring an exceptionally large 7" high-resolution LCD screen for impressive on-screen viewing capabilities. 

- Stores photos and videos with sound
- 360° image rotation (in 90° steps)
- Digital zoom

Display only. Camera cables (from diam. 5.5 mm / 0.22 in, 2-way, 4-way articulation) are sold separately. See accessories to customize.

 

Manufacturer: PCE Instruments
Test Instruments manufacturer