Industrial Measurement Products and Solutions
Order no.: PCE-RT 2000-ICA
The profilometer PCE-RT 2000-ICA is used for accurate measurement of surface roughness. The profilometer PCE-RT 2000-ICA can be used on all surfaces. The roughness with the profilometer is precisely recorded via the piezotast head. The profilometer PCE-RT 2000 can be purchased here in our online shop.

- Measures Ra, Rq, Rsm, Rsk, Rz, Rt, Rp, Rv, Rc in both Metric (µm) and Imperial (µinch)
- Ra, Rq, Rc : 0.005 μm…16 μm / 0.197 µinch ... 629.921 µinch measurement range
- Rz, Rt Rp, Rv: 0.020 µm … 200 µm / 0.797 µinch ... 7874.016 µinch measurement range
- Rsm: 5 μm …1000 μm / 1968 µinch … 3937 µinch measurement range
- Rsk: -1 …. 1 measurement range
- Measurement accuracy: <± 10% and Repeatability < 6%
- Robust Piezoelectric sensor
- Saves up to 20 Data points
- 3 different cutoff wavelengths
- Micro USB Interface
- PC Software
- Built-in rechargeable li-ion battery
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RT 2000-ICA
The roughness tester PCE-RT 2000-ICA is used for accurate measurement of surface roughness. The roughness tester PCE-RT 2000-ICA can be used on all surfaces. The roughness with the roughness measuring device is precisely recorded via the piezotast head. The roughness tester PCE-RT 2000 can be purchased here in our online shop.

- Measures Ra, Rq, Rsm, Rsk, Rz, Rt, Rp, Rv, Rc in both Metric (µm) and Imperial (µinch)
- Ra, Rq, Rc : 0.005 μm…16 μm / 0.197 µinch ... 629.921 µinch measurement range
- Rz, Rt Rp, Rv: 0.020 µm … 200 µm / 0.797 µinch ... 7874.016 µinch measurement range
- Rsm: 5 μm …1000 μm / 1968 µinch … 3937 µinch measurement range
- Rsk: -1 …. 1 measurement range
- Measurement accuracy: <± 10% and Repeatability < 6%
- Robust Piezoelectric sensor
- Saves up to 20 Data points
- 3 different cutoff wavelengths
- Micro USB Interface
- PC Software
- Built-in rechargeable li-ion battery
- Incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RT 2000-ICA
The surface tester PCE-RT 2000-ICA is used for accurate measurement of surface roughness. The surface tester PCE-RT 2000-ICA can be used on all surfaces. The roughness with the roughness measuring device is precisely recorded via the piezotast head. The surface tester PCE-RT 2000-ICA can be purchased here in our online shop.

- Measures Ra, Rq, Rsm, Rsk, Rz, Rt, Rp, Rv, Rc in both Metric (µm) and Imperial (µinch)
- Ra, Rq, Rc : 0.005 μm…16 μm / 0.197 µinch ... 629.921 µinch measurement range
- Rz, Rt Rp, Rv: 0.020 µm … 200 µm / 0.797 µinch ... 7874.016 µinch measurement range
- Rsm: 5 μm …1000 μm / 1968 µinch … 3937 µinch measurement range
- Rsk: -1 …. 1 measurement range
- Measurement accuracy: <± 10% and Repeatability < 6%
- Robust Piezoelectric sensor
- Saves up to 20 Data points
- 3 different cutoff wavelengths
- Micro USB Interface
- PC Software
- Built-in rechargeable li-ion battery
- Incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VM 20
The accelerometer PCE-VM 20 is a compact device for direct evaluation of the vibration behavior of a machine. The accelerometer can measure and display various vibration parameters, such as vibration acceleration, vibration velocity or vibration displacement.

- Vibration acceleration: 0 ... 200 m / s², RMS and peak-peak
- Vibration speed: 0 ... 200 mm / s, RMS
- Vibration distance: 0 ... 2000 μm, peak-peak
- Real-time FFT analysis
- Direct evaluation according to DIN ISO 10816
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CSM 6

The color meter PCE-CSM 6 was developed for quality control and offers a high accuracy. When using the color meter, you can choose between different color spaces (CIE L*a*b, CIE L*a*b*C*h). After a measurement with the color meter, the reading can be used as a reference value while other readings can be recorded as a sample and later be compared to the reference value easily. Useful for determining color difference, chromaticity index, color sample database management, and color difference cumulative analysis.


CIE L*a*b*C*h, CIE L*a*b*
- Measuring aperture: Ø8 mm
- optional liquid sample kit listed under accessories
- Storage of 100 reference values and 20,000 samples
- Light source D65
- Illumination/Viewing Angles are 8°/d 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CSM 6

The colorimeter PCE-CSM 6 was developed for quality control and offers a high accuracy. When using the colorimeter, you can choose between different color spaces (CIE L*a*b, CIE L*a*b*C*h). After a measurement with the colorimeter, the reading can be used as a reference value while other readings can be recorded as a sample and later be compared to the reference value easily. Useful for determining color difference, chromaticity index, color sample database management, and color difference cumulative analysis.


CIE L*a*b*C*h, CIE L*a*b*
- Measuring aperture: Ø8 mm
- optional liquid sample kit listed under accessories
- Storage of 100 reference values and 20,000 samples
- Light sources D65
- Illumination/Viewing Angles 8°/d 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PIC 20
The condition monitoring inspection camera PCE-PIC 20 is an ideal tool for any service technician who needs to visually inspect pipes and ducts. The condition monitoring inspection camera PCE-PIC 20 has a 23 mm / 0.9 in camera head, which is attached to a glass fiber push cable. 

- Cable diameter / head diameter: 23 mm / 0.9 in
- 20 m / 66 ft push cable
- Electronic meter counting
- Battery and mains operation
- Waterproof up to 20 m / 66 ft
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PIC 20
The HVAC meter PCE-PIC 20 is an ideal tool for any service technician who needs to visually inspect pipes and ducts. The HVAC meter PCE-PIC 20 has a 23 mm / 0.9 in camera head, which is attached to a glass fiber push cable. 

- Cable diameter / head diameter: 23 mm / 0.9 in
- 20 m / 66 ft push cable
- Electronic meter counting
- Battery and mains operation
- Waterproof up to 20 m / 66 ft
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PIC 20
The industrial borescope PCE-PIC 20 is an ideal tool for any service technician who needs to visually inspect pipes and ducts. The industrial borescope PCE-PIC 20 has a 23 mm / 0.9 in camera head, which is attached to a glass fiber push cable. 

- Cable diameter / head diameter: 23 mm / 0.9 in
- 20 m / 66 ft push cable
- Electronic meter counting
- Battery and mains operation
- Waterproof up to 20 m / 66 ft
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PIC 20
The inspection camera PCE-PIC 20 is an ideal tool for any service technician who needs to visually inspect pipes and ducts. The inspection camera PCE-PIC 20 has a 23 mm / 0.9 in camera head, which is attached to a glass fiber push cable. 

- Cable diameter / head diameter: 23 mm / 0.9 in
- 20 m / 66 ft push cable
- Electronic meter counting
- Battery and mains operation
- Waterproof up to 20 m / 66 ft
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PIC 20
The NDT tester inspection camera PCE-PIC 20 is an ideal tool for any service technician who needs to visually inspect pipes and ducts. The NDT tester inspection camera PCE-PIC 20 has a 23 mm / 0.9 in camera head, which is attached to a glass fiber push cable. 

- Cable diameter / head diameter: 23 mm / 0.9 in
- 20 m / 66 ft push cable
- Electronic meter counting
- Battery and mains operation
- Waterproof up to 20 m / 66 ft
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CSM 6

The colorimeter PCE-CSM 6 was developed for quality control and offers a high accuracy. When using the colorimeter, you can choose between different color spaces (CIE L*a*b, CIE L*a*b*C*h). After a measurement with the colorimeter, the reading can be used as a reference value while other readings can be recorded as a sample and later be compared to the reference value easily. Useful for determining color difference, chromaticity index, color sample database management, and color difference cumulative analysis.


- CIE L*a*b*C*h, CIE L*a*b*
- Measuring aperture: Ø8 mm
- optional liquid sample kit listed under accessories
- Storage of 100 reference values and 20,000 samples
- Light sources D65
- Illumination/Viewing Angles 8°/d 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MTS50

PCE-MTS50 is a motorized material test stand for use with PCE-series force gauges. The motorized material test stand offers enhanced control and stability during force testing. It also helps to ensure the accuracy and repeatability of vertical tension and compression force test results.


- Maximum force measurement: 500 N / 50 kg
- Automatic or manual (push-button) operation
- Adjustable feed speed: 50 ... 500 mm / min
- AC power connection (110V or 220V)
- Adjustable traverse / distance
- The mounting plate PCE-UNI must be ordered at the same time!

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MTS500

The PCE-MTS500 is a motorized material test stand for use with the following:  PCE-FB, PCE-FM, PCE-PTR, PCE-DFG and PCE-LFG Series. The motorized material test stand offers enhanced control and stability during material testing. It also helps to ensure the accuracy and repeatability of tension and compression force test results.

- Force capacity of 5000 N / 500 kg / 1100 pounds
- Automatic or manual (push-button) operation
- Adjustable velocity, traverse and feed rate
- AC power connection (110V or 220V)
- Heavy duty steel design

*** The mounting plate ADP-UNI must be ordered for non-external load cell force gauges!

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MTS500

Universal Testing Machine PCE-MTS500 (UTM) for use with the following: PCE-FB, PCE-FM, PCE-PTR, PCE-DFG and PCE-LFG Series. Universal Testing Machine PCE-MTS500 offers enhanced control and stability during material testing. It also helps to ensure the accuracy and repeatability of tension and compression force test results.

- Force capacity of 5000 N / 500 kg / 1100 pounds
- Automatic or manual (push-button) operation
- Adjustable velocity, traverse and feed rate
- AC power connection (110V or 220V)
- Heavy duty steel design


*** The mounting plate ADP-UNI must be ordered for non-external load cell force gauges!

 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VM 20
The vibration analyzer PCE-VM 20 is a compact device for direct evaluation of the vibration behavior of a machine. The vibration analyzer can measure and display various vibration parameters, such as vibration acceleration, vibration velocity or vibration displacement.

- Vibration acceleration: 0 ... 200 m / s², RMS and peak-peak
- Vibration speed: 0 ... 200 mm / s, RMS
- Vibration distance: 0 ... 2000 μm, peak-peak
- Real-time FFT analysis
- Direct evaluation according to DIN ISO 10816
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VM 20
The vibration meter PCE-VM 20 is a compact device for direct evaluation of the vibration behavior of a machine. The vibration meter can measure and display various vibration parameters, such as vibration acceleration, vibration velocity or vibration displacement.

- Vibration acceleration: 0 ... 200 m / s², RMS and peak-peak
- Vibration speed: 0 ... 200 mm / s, RMS
- Vibration distance: 0 ... 2000 μm, peak-peak
- Real-time FFT analysis
- Direct evaluation according to DIN ISO 10816
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PIC 20
The videoscope PCE-PIC 20 is an ideal tool for any service technician who needs to visually inspect pipes and ducts. The videoscope PCE-PIC 20 has a 23 mm / 0.9 in camera head, which is attached to a glass fiber push cable. 

- Cable diameter / head diameter: 23 mm / 0.9 in
- 20 m / 66 ft push cable
- Electronic meter counting
- Battery and mains operation
- Waterproof up to 20 m / 66 ft
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CRM 40

PCE-CRM 40 is a portable handheld chroma meter or spectrophotometer used to accurately measure the correlated color temperature (CCT - in Kelvin), illuminance, chromaticity, excitation purity (Pe), luminous flux (in lumens - lm), RGB and dominant wavelength of light sources such as LED, organic LED (OLED) and other forms of organic electroluminescence (EL).

 

- Measuring range: 0.1 ... 150,000 lux / 0.01 ... 15,000 foot-candle
- Spectral wavelength range: 360 ... 780 nm
- Display: 3.2" colour LCD
- Chromaticity: Ev xy, Ev u'v'

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CRM 40

PCE-CRM 40 is a portable handheld color meter or spectrophotometer used to accurately measure the correlated color temperature (CCT - in Kelvin), illuminance, chromaticity, excitation purity (Pe), luminous flux (in lumens - lm), RGB and dominant wavelength of light sources such as LED, organic LED (OLED) and other forms of organic electroluminescence (EL).


- Measuring range: 0.1 ... 150,000 lux / 0.01 ... 15,000 foot-candle
- Spectral wavelength range: 360 ... 780 nm
- Display: 3.2" colour LCD
- Chromaticity: Ev xy, Ev u'v'

Manufacturer: PCE Instruments
Test Instruments manufacturer