Industrial Measurement Products and Solutions
Order no.: 80490 Macro-Linie

The Dynamometer is suited for weighing all goods of up to 500 N. The resolution of the Dynamometer is 5 N, and the maximum deviation is ±0.3 % at full load - unique for this kind of Dynamometer. Due to its type of construction, the Dynamometer doesn't need any batteries and is also suited for demonstration purposes in schools or universities.


- Measuring range: 0 ... 500 N
- Resolution: 5 N
- Low on maintenance
- Good value for money
- Additional accessories

 

Manufacturer: Pesola
Test Instruments manufacturer
Order no.: 80490 Macro-Linie

The 500N Force Gauge is suited for weighing all goods of up to 50 kg or 110 lbs. The Force Gauge as a high resolution and a maximum deviation of ±0.3 % at full load - unique for this kind of force meter. Due to its type of construction, the Force Gauge doesn't need any batteries and is also suited for demonstration purposes in schools or universities.


- Measuring range: 0 ... 500 N
- Resolution: 5 N
- Low on maintenance
- Good value for money
- Additional accessories

 

Manufacturer: Pesola
Test Instruments manufacturer
Order no.: 80490 Macro-Linie

The 500N Hanging Scale is suited for weighing all goods of up to 50 kg or 110 lbs. The hanging scales have a high resolution and a maximum deviation of ±0.3 % at full load - unique for this kind of force meter. Due to their type of construction, the hanging scales don't need any batteries and are also suited for demonstration purposes in schools or universities.


- Measuring range: 0 ... 500 N
- Resolution: 5 N
- Low on maintenance
- Good value for money
- Additional accessories

Manufacturer: Pesola
Test Instruments manufacturer
Order no.: 80490 Macro-Linie

The 500N Laboratory Balance is suited for weighing all goods of up to 50 kg or 110 lbs. The Laboratory Balance as a high resolution and a maximum deviation of ±0.3 % at full load - unique for this kind of force meter. Due to its type of construction, the Laboratory Balance doesn't need any batteries and is also suited for demonstration purposes in schools or universities.


- Measuring range: 0 ... 500 N
- Resolution: 5 N
- Low on maintenance
- Good value for money
- Additional accessories

 

Manufacturer: Pesola
Test Instruments manufacturer
Order no.: 80050 Macro-Linie

The 50kg Dynamometer is suited for weighing all goods of up to 50 kg or 110 lbs. The Dynamometer as a high resolution and a maximum deviation of ±0.3 % at full load - unique for this kind of force meter. Due to its type of construction, the Dynamometer doesn't need any batteries and is also suited for demonstration purposes in schools or universities.


- Measuring range: 0 ... 50 kg
- Resolution: 500 g
- Low on maintenance
- Resistance to corrosion
- Additional accessories 

 

Manufacturer: Pesola
Test Instruments manufacturer
Order no.: 80050 Macro-Linie

The 50kg Force Gauge is suited for weighing all goods of up to 50 kg or 110 lbs. The Force Gauge as a high resolution and a maximum deviation of ±0.3 % at full load - unique for this kind of force meter. Due to its type of construction, the Force Gauge doesn't need any batteries and is also suited for demonstration purposes in schools or universities.


- Measuring range: 0 ... 50 kg
- Resolution: 500 g
- Low on maintenance
- Resistance to corrosion
- Additional accessories 

 

Manufacturer: Pesola
Test Instruments manufacturer
Order no.: Gamma-Easy

The Geiger Counter Gamma-Easy clearly indicates the radioactive contamination in µSv/h und mSv/h immediately. The Geiger Counter helps you to form an opinion on the omnipresent environmental radiation of a delivered or purchased material (metal scrap, food…) within only seconds in order to decide about the condition of these goods. The test instrument in addition works as a dose meter.


- Measuring range: 0.1 ... 50 µS/h
- Resolution: 0.01 µS/h
- Acoustic signal of decay rate and Dosimeter/AVG-Function
- Robust and ergonomic casing
- MAX-Hold-Function for last 10 measurements

 

Manufacturer: Gamma-Scout
Test Instruments manufacturer
Order no.: 80050 Macro-Linie

The 50kg Hanging Scale is suited for weighing all goods of up to 50 kg or 110 lbs. The hanging scales have a high resolution and a maximum deviation of ±0.3 % at full load - unique for this kind of force meter. Due to their type of construction, the hanging scales don't need any batteries and are also suited for demonstration purposes in schools or universities.


- Measuring range: 0 ... 50 kg
- Resolution: 500 g
- Low on maintenance
- Resistance to corrosion
- Additional accessories

Manufacturer: Pesola
Test Instruments manufacturer
Order no.: 80050 Macro-Linie

The 50kg Laboratory Balance is suited for weighing all goods of up to 50 kg or 110 lbs. The Laboratory Balance as a high resolution and a maximum deviation of ±0.3 % at full load - unique for this kind of force meter. Due to its type of construction, the Laboratory Balance doesn't need any batteries and is also suited for demonstration purposes in schools or universities.


- Measuring range: 0 ... 50 kg
- Resolution: 500 g
- Low on maintenance
- Resistance to corrosion
- Additional accessories 

 

Manufacturer: Pesola
Test Instruments manufacturer
Order no.: Gamma-Easy

The Radiation Meter Gamma-Easy clearly indicates the radioactive contamination in µSv/h und mSv/h immediately. The Radioactivity Meter helps you to form an opinion on the omnipresent environmental radiation of a delivered or purchased material (metal scrap, food…) within only seconds in order to decide about the condition of these goods.


- Measuring range: 0.1 ... 50 µS/h
- Resolution: 0.01 µS/h
- Acoustic signal of decay rate and Dosimeter/AVG-Function
- Robust and ergonomic casing
- MAX-Hold-Function for last 10 measurements

 

Manufacturer: Gamma-Scout
Test Instruments manufacturer
Order no.: Gamma-Easy

The Radioactivity Meter Gamma-Easy clearly indicates the radioactive contamination in µSv/h und mSv/h immediately. The Radioactivity Meter helps you to form an opinion on the omnipresent environmental radiation of a delivered or purchased material (metal scrap, food…) within only seconds in order to decide about the condition of these goods.


- Measuring range: 0.1 ... 50 µS/h
- Resolution: 0.01 µS/h
- Acoustic signal of decay rate and Dosimeter/AVG-Function
- Robust and ergonomic casing
- MAX-Hold-Function for last 10 measurements

 

Manufacturer: Gamma-Scout
Test Instruments manufacturer
Order no.: PCE-TG 250-ST
Replacement standard probe for PCE-TG 250 

- 5 MHz frequency 
- measuring surface approx. Ø 10 mm

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-OCM 10
The automotive tester PCE-OCM 10 is characterized by the OLED display. The OLED display on this automotive tester allows the display itself to be read in the dark, as it is self-luminous. 

- Measurable up to 600 A
- Clamp with multimeter functions
- OLED display
- NCV function
- TRMS AC A
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-186 CB
The cable detector PCE-186 CB consists of a transmitter and a receiver. The transmitter of the cable detector has many functions. For example, the cable detector can be used to find wires in walls or break cables.

- Voltage measurement AC / DC
- For detection of line interruptions
- Cable tracking in walls and cable duct
- Different beeps
- Resistance measurement
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-186 CB
The cable fault meter PCE-186 CB consists of a transmitter and a receiver. The transmitter of the cable fault meter has many functions. For example, the cable fault meter can be used to find wires in walls or break cables.

- Voltage measurement AC / DC
- For detection of line interruptions
- Cable tracking in walls and cable duct
- Different beeps
- Resistance measurement
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-186 CB
The cable locator PCE-186 CB consists of a transmitter and a receiver. The transmitter of the cable locator has many functions. For example, the cable locator can be used to find wires in walls or break cables.

- Voltage measurement AC / DC
- For detection of line interruptions
- Cable tracking in walls and cable duct
- Different beeps
- Resistance measurement
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-OCM 10
The clamp meter PCE-OCM 10 is characterized by the OLED display. The OLED display on this clamp meter allows the display itself to be read in the dark, as it is self-luminous. 

- Measurable up to 600 A
- Clamp with multimeter functions
- OLED display
- NCV function
- TRMS AC A
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-OCM 10
The clamp on tester PCE-OCM 10 is characterized by the OLED display. The OLED display on this clamp on tester allows the display itself to be read in the dark, as it is self-luminous. 

- Measurable up to 600 A
- Clamp with multimeter functions
- OLED display
- NCV function
- TRMS AC A
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CMM 10
The CO2 analyzer PCE-CMM 10 is a multi-function meter for measuring the air quality. This CO2 analyzer measures synchronously the CO2 concentration, the air temperature and the humidity. 

- Measuring range CO2: 400 ... 5000 ppm
- Measuring range temperature: -10.0 ... 50.0°C / 14 ... 122°F
- Measuring range humidity: 0 ... 99% rh
- Battery operation
- Limit exceeded
- Beep
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-LT 15
The current calibrator PCE-LT 15 is a combination device which detects configuration errors in the network and can be used as a current calibrator at the same time. Thus, the periphery of a network can be quickly checked with the LAN tester. 

Measuring function:
- AC voltage: 750V
- DC voltage: 1000V
- Resistance: 4 MΩ
- Continuity test: 400 Ω
- Electrical safety: CAT III 600V
Manufacturer: PCE Instruments
Test Instruments manufacturer