Relative Humidity Meter PCE-P18 Modbus RTU
£ 133.00
Price excl. VAT &. delivery

The relative humidity meter is used in HVAC technology to monitor humidity and temperature. The measured values ​​are output by the relative humidity meter via the RS485 interface. In this compact relative humidity meter, air humidity and temperature are precisely determined using a semiconductor component.

  • Measuring range humidity: 0 … 100% RH
  • Measuring range temperature: - 20 … 60 ° C
  • Interface: RS 485 Modbus

Thermo Hygrometer PCE-P18 Modbus RTU
£ 133.00
Price excl. VAT &. delivery

The thermo hygrometer is used in HVAC technology to monitor humidity and temperature. The measured values ​​are output by the thermo hygrometer via the RS485 interface. In this compact thermo hygrometer, air humidity and temperature are precisely determined using a semiconductor component.

  • Measuring range humidity: 0 … 100% RH
  • Measuring range temperature: - 20 … 60 ° C
  • Interface: RS 485 Modbus

Voltage Transmitter PCE-P20Z AC Voltage
£ 133.00
Price excl. VAT &. delivery

The PCE-P20Z measuring transducer measures voltages up to 600 V AC and converts this into a standard signal. Depending on the design, the PCE-P20U-I transducer can measure voltages up to 250 V AC, 400 V AC or 600 V AC and outputs a 4 … 20 mA standard signal. Depending on the model, the supply voltage of the transducers is either 85 … 253 V AC / DC or 20 … 40 V AC / DC.

  • RMS Measurement of voltages up to 600 V AC
  • Input: AC voltage
  • Output: 4 … 20 mA or 0 … 10 V Standard signal
  • Various supply voltages

Note: This item must be configured before ordering!

Water Analysis Meter PCE-PH20S
£ 133.00
Price excl. VAT &. delivery

The water analysis meter has been developed with the purpose of finding an effective method for directly determining the pH value of soil. With the help of this water analysis meter, it is possible to quickly and accurately measure the pH value of soil, including a soil sample taken from the ground.

  • Measuring range: 0.00 … 14.00 pH
  • Dissolution: 0.01 pH
  • Power supply: 4 x 1.5 V AAA batteries

  • *Care must be taken when inserting probe to not break it** 

1-Phase Power Meter Easycount-1-CEE-U
£ 130.00
Price excl. VAT &. delivery

The Easycount-1-CEE-U 1-Phase energy meter is an electricity meter for alternating voltages up to 230 V, enclosed in a splash-proof and impact-resistant housing. The cable ends of the Easycount-1-CEE-U energy meter are equipped with male and female connectors.


  • Uncalibrated counter
  • Voltage input: 230 VAC
  • Current rating: 16 A
  • Frequency: 50 HZ


1-Phase Power Meter Easycount-1-Schuko-U
£ 130.00
Price excl. VAT &. delivery

The Easycount-1-Schuko-U 1-Phase energy meter is an electricity meter for alternating voltages up to 230 V, enclosed in a splash-proof and impact-resistant housing. The cable ends of the Easycount-1-Schuko-U energy meter are equipped with male and female connectors.


  • Uncalibrated counter
  • Voltage input: 230 VAC
  • Current rating: 16 A
  • Frequency: 50 HZ


Adhesion Tester PCE-CRC 10
£ 130.00
Price excl. VAT &. delivery
The Adhesion Tester PCE-CRC 10 is designed to determine the quality of the adhesion of coatings. The Adhesion Tester is suitable for thin, thick or tough coatings on all surfaces. Since the adherence of paintings and other coatings is a crucial product and quality characteristic for their protective effect, adhesion testers are used in a wide range of industries.

  • Evaluation of adhesion
  • For thin, thick or tough coatings
  • Large, non-slip grip
  • Various blades selectable

Air Humidity Meter PCE-HT 114
£ 130.00
Price excl. VAT &. delivery
The refrigerator air humidity meter PCE-HT 114 has a temperature and humidity sensor on 2 m / 6.6 ft cable. The PCE-HT 114 air humidity meter records the temperature and humidity in the interior of the refrigerator and simultaneously displays it via the LCD display.

Measuring function
  • Temperature: -40 … 125°C / -40 … 257°F (external)
  • Humidity: 0 … 100% rh (external)
  • Memory for 25,920 readings
  • Saves as PDF
Automotive Material Thickness Tester PCE-CT 25FN
£ 130.00
Price excl. VAT &. delivery

The automotive material thickness tester is used for the quick and precise detection of layer thicknesses on metals. In comparison to many other thickness meters, this automotive material thickness tester does not have to differentiate between ferrous and non-ferrous metal.

  • Measuring range:  0 … 1500 µm
  • Minimum thickness: Fe: 0.3 mm, NFe: 0.05 mm
  • Measuring accuracy: ± (3% + 1 µm)
  • Resolution: 0.1 µm in the measuring range 0 … 100 µm                      1 µm in the measuring range> 100 µm